Show us your fixed blades
-
Thats nice Dexter

-
Böker Plus Rambler


I replaced that leathersheath with a kydex neck sheath



Best wishes
Robert -
This is my Gerber Mark II.According to the serial number it was U.S. made around 1987.

-
That Boker looks awesome. I might have to pick one up. How do you like it?
-
Fit and finish isn´t perfect, but i like it very much. It´s my fav small fixed blade.
Also the price is very good, under 30 euro here in Germany
got a nice deep hollow grind and cuts very good for its size.
For bigger hands like mine, throw on a lanyard.Its the production version of a handmade series by Juergen Schanz, Design from Lhotak, some austrian guy, don´t know much about him. 8)
-
Latest Fixed Blade

-
i had that Izula three times already, always sold it for other stuff.
it will never be my friend :D -
I've been hanging out and lurking in the MT.org forums for a couple weeks now, and this is the first time I noticed a straight up knife section. Very cool.
There are some great blades in this thread too.

I've got a few fixed blades myself. You'd find most of my "collection" to be fairly single minded as to the maker, but it is what it is, right?
Bark River's take on a Bob Loveless drop point hunter.
I need to take a better shot of this one. This is the Gunny (and my 'normal' EDC) from their SAR collection
And my EDC when I'm going into the whoop up north - a Bravo 1, the Gunny's larger brother.
I won't make you guys suffer through all of them. Least ... not all at once. :)
-
We've no problem with lots of pictures Janitor.
Welcome to the forum. -
Very nice knives mate :)
-
Well thank you gentlemen.
I'm a bit surprised though ... I should have thought that members with post counts like your would know better than to be encouraging a n00b to show his toys off. :)
Ok - Here's a (roughly) 8" Santoku with blue stabalized elder burl slabs. When it came, Mrs Janitor wanted to know what I spent on it. She really had some severe problems with the thought of something like a 'simple kitchen knife' costing that much.
That evening, she used it. It only took a single cut for her to have that 'ah-ha!' moment and admit that she sorted out the difference between this and the department store knives. At this point, I would truely be afraid to try and take it from her.

This image (somewhat) shows the convex grind they put on the Barkies -

As long as I'm on the subject of first days, when my Bravo 1 came I went out into the yard and hacked through a fairly decent sized piece wood -

Then, into the kitchen to get slices out of an apple thin enough to see the knife through them. This blade means serious bidness -

-
Brothers of different mothers. My Hartsook Talon Lite Custom in 440C with OD Green Durakote (well used, of course), and my Buck Hartsook Ultralite in S30V with Black Oxide (also, well used).

-
@Janitor said:
Well thank you gentlemen.I'm a bit surprised though ... I should have thought that members with post counts like your would know better than to be encouraging a n00b to show his toys off. :)
Ok - Here's a (roughly) 8" Santoku with blue stabalized elder burl slabs. When it came, Mrs Janitor wanted to know what I spent on it. She really had some severe problems with the thought of something like a 'simple kitchen knife' costing that much.
That evening, she used it. It only took a single cut for her to have that 'ah-ha!' moment and admit that she sorted out the difference between this and the department store knives. At this point, I would truely be afraid to try and take it from her.

This image (somewhat) shows the convex grind they put on the Barkies -

Pictures are always good

That Santoku is toooo
to use :ahhh -
Well thank you Sparky.
Yes - they did a beautiful job on it, but I'm afraid that it's used virtually every single day. At least every day that we're home.
-
Putting scales on a Cheap (Pakistani) Damascus blade.
I used a plastic IKEA cutting board (2mm thick) for the handles and Superglue :D
I originally intended to use rivets too, since the Blank already had holes , but I have not yet found the right size (2.4mm, but about 1.5cm long), so I may just make some fake, ornamental, inserts for the holes.

Lesson: do not drill holes in the scales unless you have something to fill them up with!
I am thinking whether to cut some of the scale material, so as to show the file work better.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

Its not orange :P