EURIKA! Threaded tubes
-
inspired idea mate.

+1 its got me thinking

that's a first.
getting the thumbs up from me for that!
-
That's brilliant! :ahhh You sir, have solved a huge problem for me. You have a free set of titanium liners drilled for 2.5mm coming to you as soon as I get my new saw blades on Monday. Do you like carbon fiber, orange or red G10?
Also, what about the backtools?
Bushidomosquito,
This is a really generous offer you're making. Believe me, I would love to have some of your beautiful creations. So I might just take you up on this one :-))
However, I would like to see a knife made first using these barbells, whether by yourself, Steve, or other masters on this forum. Once I see that the idea actually works, I won't feel so bad about accepting a gift like this.
Steve, have you looked into the internal threading? What screw will it accept?
Thank you again, Gentlemen. Let's see the first mod!
Well, I wasn't offering a finished knife, I had been asked by other modders about getting ti liners and I'll be selling them in sets when I get my pre-cut parts in and I don't have to saw every one by hand. I was under the impression that you were a modder yourself since you came up with this idea. Seems like the sort of discovery that would be made by someone that's been thinking about it for a while. You should give modding a try, it's loads of fun.
I like my 1/8" pivots on the main tools, they're much stronger that way. I did some googling and found externally threaded barbells. Since I needed better backtool hardware and these would only require a slight enlargement of the backtool pivots I think they will work very well for me. I hide the backtool fasteners under the scales so an externally threaded pin with nuts would have larger threads and more strength.
-
Bushido,
I know you're not offering a finished knife, and wouldn't accept one from you anyway. I realize how much work goes into one and a skill like yours should be compensated accordingly. But liners are nice and I do appreciate your generous offer. I will take you up on it when the time comes :-))
As far as modding, I haven't done a single knife yet. I actually joined this forum in order to learn from experience of others before starting on my own project. And when I saw the quest for a better pin, I wanted to find one and share with everyone once I did. Now I'm hoping that some of the more experienced people than me give it a shot and post photos. I will try it myself as well, but something tells me it's never going to be as good as yours or other masters here.
Thanks again and I'm glad I was able to help.
-
Gentlemen and ladies I can confirm that these will work. I used externally threaded barbells and it's a perfect fit. And to answer a question previously asked. Harder than brass and these things are tough.
-
Steve,
Thank you so much for taking your time to prove my idea. With your permission, I will share a photo you've sent me:
http://i808.photobucket.com/albums/zz5/tattoosteve99/3eb03513.jpg
http://i808.photobucket.com/albums/zz5/tattoosteve99/eacf701f.jpg
Thanks again and hope all will be well with you. -
Heres some pics
2.5 mm
With backspring

And 3mm too! :o


And yes that's a custom electricians blade for my last mod for awhile. And no you can't have it :p
-
Steve,
The blade is beautiful. What other blades will the mod have?
Now that I see my idea working, I have to still solve two challenges. One is to find out the thread for internally-threaded barbells. Second is to find a suitable screw to be used for the ends.
I found info from one manufacturer that the thread is M1.6. Wafer head M1.6 screws have a head diameter of 3mm, just a hair bigger than the barbell shaft. So they might pull though. Maybe I'll have to use washers under the screws. But that will damage the look.
Dilemmas, dilemmas...
-
Fantastic idea. So now those with piercings can wear SAK tools. You could have your EDC fixed to body parts ready for use at a moments notice, cool!
-
This is very exciting!

-
Resurrecting an old thread, so are these now used instead of using a hammer to peen and make rivets? Would be very useful for alox scales.
-
@Raukodur said:
Resurrecting an old thread, so are these now used instead of using a hammer to peen and make rivets? Would be very useful for alox scales.Yes, bushidomosquito uses them.
5 layer brass scaled Alox pattern with bronze liners.
A light box makes a big difference...
Multitool.Org Forum (multitool.ninja)
carbon fiber and titanium Super Tinker
Carbon scales with titanium liners, tweezers and toothpick. This one is put together like a Sebenza with phosphor bronze washers and the pivot pins of a prec...
Multitool.Org Forum (multitool.ninja)
-
awesome work.
Is he the only one, or are they universally used? seem to be the much easier option, especially for alox scales.
More importantly, give than I wish to get an SAK mod made, anyone in the UK practice this?
-
Resurrecting an old thread, so are these now used instead of using a hammer to peen and make rivets? Would be very useful for alox scales.
Yes, bushidomosquito uses them.
5 layer brass scaled Alox pattern with bronze liners.
A light box makes a big difference...
Multitool.Org Forum (multitool.ninja)
Those are custom sex-bolts, not the threaded tubes referenced in this thread methinks.
carbon fiber and titanium Super Tinker
Carbon scales with titanium liners, tweezers and toothpick. This one is put together like a Sebenza with phosphor bronze washers and the pivot pins of a prec...
Multitool.Org Forum (multitool.ninja)
-
Is he the only one, or are they universally used? seem to be the much easier option, especially for alox scales.
More importantly, give than I wish to get an SAK mod made, anyone in the UK practice this?
These are 1/8 size. You have to drill out the tools and backsprings which is very tricky unless you have access to a mill.
-
Hmm, reading back through this thread, it sounds like there are body piercing jewelry pieces which would work...
Did nothing come of that?
-
I have no idea on that one sorry. All I did was to confirm they fit. Also finding out that the ones I have are a threaded shaft on the outside not inside.
-
Guess I was wrong again
I just figured these were the ones after I saw the mods. -
Although I did find some 2.5 mm threaded ones ;). Ahhhh ohhhhhh. I might let y'all in on it

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

Strip one of your piercings out and see what the diameter is Mate >:D