What Did You Use Your Multitool For Today?
-
Punching a new hole in the belt coupled with opening a package of cheese? I's say the new hole was closer to the end of the belt.

-
Just seen your meths stoves Tony
and cool pics to boot 
Today was day of the awl as conker bashing took place. This is a pic from last year, this year we have upgraded to paracord :D

-
Thanks Neil
It was just for fun, as I'm going to teach a young friend to make them I thought I better have a practice on my own ;)It took about 40 shots to get those two good ones

Conkers is a proper job for a SAK

-
Neil, that worn red alox looks so groovy.

-
I love the awl on my Pioneer. I use it all the time. I wish more tools came with awls, but I don't really want to get these guys started on THAT.
My packing tape dispenser collapsed today at work, I had to use my blast to cobble it back together. The tabs that hold the tape shield in bent, causing the cutter to stay recessed(they are connected) and pretty much fail as a dispenser. Shockingly, I was able to bend the little tabs with my blast pliers and didn't break them.
My pioneer has seen a lot of package opening lately(Thanks Steve!!!!)
-
I used the blade on my Squirt PS4 to open up the clam shell on a new razor. It cut through it like butter.

-
Me too. I used the serrated blade in my Wave to slice a memory stick out of the clam shell.

-
We picked up a Watercooler today. Seeing as how I have a wee one running around, I decided to use the cheesy anchor strap they provide in order to keep it from toppling over on him. So, after drilling a small hole with the awl on my Vic Pioneer, I started to drive the drywall anchor into the wall with the phillips on my blast, and halfway through it snapped. I then used the pliers on my Blast to remove the shattered anchor. Back came the phillips to drive a new anchor in and to install the screw that holds the nylon strap to the wall. All together a good job, with a few nicely placed uses by two of my favorite tools.
-
I have been using the pliers on an LM Squirt P4 quite a lot, cleaning some knives I got.
They are the only pliers, on a multitool, I use nearly daily! -
I used the blade on my SC4 to open the burlap covering from around the root ball of the tree I was planting. Then I used the wire cutters during a repair to the invisible fence wire that I damaged while digging the hole. :-\
-
I just used the diamond file on a Charge TTI to sharpen the scissors on a Micra. It worked swimmingly

-
OHT saw just cut a small hole to hide the ariel cable in my bedroom window... friggin cold getting in!
-
used my sideclip to dismantle a gieger counter
-
Just sacrificing myself, trying to demonstrate uses of multitools for you lot...

I even had to cook and eat these wine preserved sausages I used as background in the picture since they were left out for the fridge for the whole 5 minutes I took to take the picture and were deemed unsafe for serving to guests.
-
@dks said:
Just sacrificing myself, trying to demonstrate uses of multitools for you lot...
I even had to cook and eat these wine preserved sausages I used as background in the picture since they were left out for the fridge for the whole 5 minutes I took to take the picture and were deemed unsafe for serving to guests.
your noble gesture is noted and appreciated.

:D
-
@dks said:
Just sacrificing myself, trying to demonstrate uses of multitools for you lot...
I even had to cook and eat these wine preserved sausages I used as background in the picture since they were left out for the fridge for the whole 5 minutes I took to take the picture and were deemed unsafe for serving to guests.

@ryan1835 said:
used my sideclip to dismantle a gieger counterI bet that's never been said on an internet forum before


-
Before:

after!

Probably the first, documented, time anybody actually used a Flair for something!Really the corkscrew is pretty bad, compared to the ones on Victorinox etc. It works and you can apply leverage using the bottle opener tool to remove the cork but it is too narrow.
It could destroy older, crumbling, corks and gives the feeling that if forced it will break. I was actually worried at some point as I was pulling the cork out..Also the combination bottle opener/can opener tool does not sit well on the bottle neck and slides. I was worried about scratching the golden colour off.
-
What is on that plate?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
