Leatherman REBAR Multi-Tool
-
@David said:
Bob thats a good deal there. I`ve had to adjust a few older tools with a punch and a sharp whack or two with the ole ball peen hammer when the handles got a little loose. The handles would begin to bulge from many openings. All the caming action over time took its toll. But a little love tap would put every thing back into order. :DSorry to disappoint David, but ya won't have to do that no more! :D
-
Very cool Bob, thanks for the info.
Would you say the Rebar was roughly the same thickness as a Blast or (hopefully) a bit thinner? -
@Gareth said:
Very cool Bob, thanks for the info.
Would you say the Rebar was roughly the same thickness as a Blast or (hopefully) a bit thinner?Believe it or not, the answer is: Both ;) :D
Its hard to describe (and none of the photos show it properly) but the handle cross-section is tapered. The portion where the ruler is stamped is thinner (thinner than a Blast I believe) and then it tapers up wider to where the edges of the handle are rolled over.
poor attempt at a sketch of the handle cross section: (pink represents the knife blade)

Without having a Blast nearby to compare it to, I can't say for sure, but it does make for a nice feel in the hand. :)
-
Resisted buying the ST300 because my excuse is it's to big and heavy this one I might have ran out of excuse!
-
@J-sews said:
Earlier in this thread I'd theorized that the rivet shown above served a function similar to the rivet on Waves, Charges, etc. Namely, that it held an internal component that acts like a "stop" for the plier jaw to come up against when folded. I was wrong.
...
Instead, we found out during the Leatherman tour that this rivet actually retains a flat bit of metal that acts as a powerful backspring for the plier head.
I wasn't able to get a photo, but below is a picture of the new Sidekick, which employs the same rivet-and-flat-backspring principle. You can see the ends of the backsprings (circled in red on the right, not circled on the left)
...
Older "box style" Leatherman tools, beginning with the PST and right on up to the Super Tool 300, simply employ friction of the handles provide tension to the plier head. Take a look at yours; see how the plier head "cams" up against the handle the farther you unfold it? Do that a few thousand times and a metal fatigue crack might start forming in the handle steel.Now grab a Leatherman Juice tool and try it. See how the handles "snaps" into the open postion with authority? That is how the new Rebar functions, as well as the new Sidekick and Wingman. Nice, huh? :)
And as an added bonus, the flat bit of spring steel ought to remove any concern of metal fatigue.

Way cool Bob.

Any word on this improvement moving to the ST300?
-
Still undecided on the Wingman and Sidekick, I'd say they're probablys. But this Rebar looks like a gotta have. Someone mentioned earlier that they wondered about a price: Optics Planet shows one for $49.95. Wouldn't hurt my feelings if they came out with a titanium handle version, and threw in a S30v main blade. Actually, with the blue tint in those pics, I'd like to see one with blue titanium like the liners on some of the Chris Reeve numbers. I think it's CRs, might have been William Henrys. Either way, from those pictures, some of you probably know what I'm talking about. I know they would be too pricey, but I'm just wishin'.
-
I personally don't see why they don't go with a deluxe version of the traditional models. I would definitely buy a Rebar with upgraded blade steel. I just pray they don't make the deluxe version available as a Cap crimper only model like the TTi was. I am not an EOD tech, and I don't need a cap crimper.
Heck, a Blast with upgrades would have sold well IMHO. It's a great style of tool that many stick to for various reasons, so it's awesome to see that LM isn't abandoning it. I think I've said that before but I really am happy about this tool. It will cement my continued LM loyalty. They have been my favorite for years(minus about a 3 month period when about 5 tools in a row had big issues, but the warranty made up for it).
-
@Beerplumber said:
So what you're saying is I need to pick up a micra...now I am free to carry scissorless full size multis!
-
Love this REBAR, real winner for leatherman. I like the super tool 300 but kinda thought it was a bit big for my little girly hands :D so this would be great.
-
I wish this puppy had scissors and spring-loaded pliers, but I still dig it and will certainly have at least one. Looks awesome.
-
-
I'm excited about this midsized complement to the ST300

I might just buy one or twelve :D
Now, if they come out with a matching key-chain sized model

-
@turnsouth said:
I'm excited about this midsized complement to the ST300
I might just buy one or twelve :D
Now, if they come out with a matching key-chain sized model

Ya know, I was actually gonna be content with just this one(for now), thanks a lot paul, now I'll just be sitting here hoping they actually do come out with that!

-
I'm excited about this midsized complement to the ST300

I might just buy one or twelve :D
Now, if they come out with a matching key-chain sized model

Ya know, I was actually gonna be content with just this one(for now), thanks a lot paul, now I'll just be sitting here hoping they actually do come out with that!

Sorry Sean (
)I was just sitting here thinking that the Micra needed an update, but one in keeping with the same all stainless traditional form factor. And I thought that it would really look cool if it was in the style of the ST300/Rebar. (Anyone a PhotoShop guru? Just so that we [and Leatherman] can see how cool it would look. :D)
I'm thinking "Micra 300"

-
It's a stellar idea. I think the micra is long overdue for a replacement that does the brand justice. These Squirts they keep coming out with don't really appeal to me. Try as I might, I just can't get on with the PS4, and as far as the style series goes I am completely dissatisfied. The micra was perfect, I hope they can come out with a new version soon that is in line with that status quo.
-
I'm excited about this midsized complement to the ST300

I might just buy one or twelve :D
Now, if they come out with a matching key-chain sized model

Ya know, I was actually gonna be content with just this one(for now), thanks a lot paul, now I'll just be sitting here hoping they actually do come out with that!

Sorry Sean (
)I was just sitting here thinking that the Micra needed an update, but one in keeping with the same all stainless traditional form factor. And I thought that it would really look cool if it was in the style of the ST300/Rebar. (Anyone a PhotoShop guru? Just so that we [and Leatherman] can see how cool it would look. :D)
I'm thinking "Micra 300"

I think that's a great idea. I wrote Victorinox a while back about a keychain Swiss Tool. :D
-
@Mercury said:
It's a stellar idea. I think the micra is long overdue for a replacement that does the brand justice. These Squirts they keep coming out with don't really appeal to me. Try as I might, I just can't get on with the PS4, and as far as the style series goes I am completely dissatisfied. The micra was perfect, I hope they can come out with a new version soon that is in line with that status quo.I also do not like the Style line and have been disappointed with all of them with them exception of the Style. I really do love the PS4 and carry one every day.

-
@captain spaulding said:
It's a stellar idea. I think the micra is long overdue for a replacement that does the brand justice. These Squirts they keep coming out with don't really appeal to me. Try as I might, I just can't get on with the PS4, and as far as the style series goes I am completely dissatisfied. The micra was perfect, I hope they can come out with a new version soon that is in line with that status quo.
I also do not like the Style line and have been disappointed with all of them with them exception of the Style. I really do love the PS4 and carry one every day.

Read that first line again, it's kinda funny!
I like the micra over all of them The scissors are just plain awesome. I just really dig the all stainless construction, I wish they all had that. My blast is my favorite tool but compared to a PST it does feel a little cheap. I can't wait for the REBAR!!!
-
So here is my conversation with Juli today:
ME:
So I'm thinking that with the Rebar coming out next year, that there needs to be a matching key-chain sized tool in the ST300/Rebar family.
How about a "Micra 300"?Leatherman:
Hey Paul-
The idea is that the Rebar will kind of fill out the "Heritage Collection" of the Micra, Rebar and Super Tool 300. If you look at the Micra when it's closed, it has that same kind of scoop neck design as the Rebar and ST 300.Jackaroo Jim:
Mmm... I like that Heritage Collection idea! Akubra uses that in their hats too, the best of the best collection with more details.
Wonder if the Charge/Wave may adopted them awlsome ideas from the Rebar some day ... hop hop hop hop hop
Will definitely be wanting a Rebar in my future! Finally getting a smaller tool with an awl in there - hopefully with an elongated thread-hole too.Me:
I was just thinking that by adding the matching nail-nick access to the handles of the Micra, that it would end up being an inexpensive and attractive update.
**
Leatherman:**
@Paul, we would have to produce all new dies ($$$) for nail nicks if you mean the cutouts that Rebar and ST300 have to access the tools. The Micra has the regular nail nicks right now though.Me:
Yea, that's what I meant. Just the minor (though quite expensive) change, to make them look as though they were part of the "set", as it were.Me (again):
It was just a suggestion, and I know that the Micra is still a best seller, but it is getting older, and a minor design change might be just the thing to "freshen up" a reliable company standard.(I know it would cause me, and others to "re-buy" the Micra :))
Leatherman:
Good idea :) -
If they do a 'freshen-up' of the Micra it really would be the perfect time to do a pliers version. :) I do like my P4 and PS4 but, as far as I'm concerned anyway, the Micra has better screwdrivers by a long way.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login