A Pilgrimage to the Holy Land
-
@DaveK said:
Having seen some snippets of this visit on Google+ I thought I would pop in and say just how bloody awesome I think this is/was.Did they have to forcibly evict you at the end Bob or did you go quietly? :D
It was indeed difficult to say goodbye Dave, especially with so much exciting stuff to see everywhere we looked. :)
Having seen some snippets of this visit on Google+ I thought I would pop in and say just how bloody awesome I think this is/was.
Did they have to forcibly evict you at the end Bob or did you go quietly? :D
I think the Portlad PD SWAT team was stacked up outside the door just in case. :D :D
And it was a good thing they were there too!!
Because while we were there, it seems some crazy visitor named Mat tried to make off with this display case of fabulous gold-plated Leatherman tools! :o
Just kidding! :D :D Actually, this display was one of the first things we saw upon entering the factory offices. I didn't get to memorize the description plate, but apparently this was presented to Tim Leatherman and Steve Berliner as a sign of appreciation by all the employees of Leatherman (hope I got that right) It contains all of the Leatherman tool models produced up to that point, and each one is 24k gold plated! :o Very awesome!

-
Enjoy, enjoy...I can only salivate from this side of the pond.

-
Very cool everybody! I'm glad Bob got to Portland after all this time, and looks like you were all very well rewarded.

So, did anyone put in a good word for the ol' KF4? :D
-
@NeitherExtreme said:
Very cool everybody! I'm glad Bob got to Portland after all this time, and looks like you were all very well rewarded.
So, did anyone put in a good word for the ol' KF4? :D
We sure did Luke!
And hopefully it didn't fall on deaf ears. :) -
How are them awesome P5Rs treating you?
Any reviews on them?
Were any of them engraved?My cat & I are jealous of your tools. Is amazing that you got pictures there, must of been taken by the Leatherman staff then? Did Leatherman leave any juicy tid-bits
or hintsof items coming out for the holidays?? -
Very cool everybody! I'm glad Bob got to Portland after all this time, and looks like you were all very well rewarded.

So, did anyone put in a good word for the ol' KF4? :D
We sure did Luke!
And hopefully it didn't fall on deaf ears. :)Was really disappointed that Leatherman did <u>not</u> come out with a 10th Anniversary Juice.
Lil' over 2 months left of this year... no worm sign! -
@Xelkos said:
How are them awesome P5Rs treating you?
Any reviews on them?
Were any of them engraved?Even though none of the P5R's were signed by Tim, they are still one heck of an awesome flashlight! :o I was playing around with mine yesterday - very cool features, very innovative engineering.
(at least it was innovative to me, but then again, I'm not a flashlight guy) ;)I'll get some pictures and some thoughts up about it soon, and you lightheads can tell me what you think.

@Xelkos said:
My cat & I are jealous of your tools. Is amazing that you got pictures there, must of been taken by the Leatherman staff then? Did Leatherman leave any juicy tid-bitsor hintsof items coming out for the holidays??The Leatherman folks thought of everything, they even had their staff photographer there!
Which was great, because even though I had my camera along, there's no way I was going to get sidetracked taking photos and maybe miss out on the conversations. :P :DThere were juicy tidbits, but most of it was interesting stuff about retired and existing tools. We did gain some insight into how the new tool developement process works at Leatherman, including the news that it usually takes about two years for a new product to go from concept to production, and learned about some of the many steps along the way. :)
But other than hints that there were more new projects in the pipeline (and there are ALWAYS new projects in the pipeline at Leatherman) the only upcoming release that was confirmed was the Rebar, coming out next spring.

-
You know I hate to break it you but that probably wasnt Tim Leatherman.... It's usually just a guy in a Tim Leatherman suit. Might have even been a female in there. Anyway, Im sure it was still magical, like seeing Mickey Mouse when you first step into the Magic Kingdom. Don't let it get you down
-
@Xelkos said:
How are them awesome P5Rs treating you?
Any reviews on them?
Were any of them engraved?I've been thinking about this! I just wanted to get some time under the belt with it, it does have pros & cons and I/we will post some reviews soon I'm sure

I'll just say now it is one cool light! (and I have a few, surefire, fenix, lumina, mag, gerber and other Lensors)
-
One piece of advice I can give, from owning a P5 for about a week before I broke it... don't let it go underwater. If it does, do <u>not</u> move the focus slider - get it dry ASAP.
The little dome that covered the LED element popped off of mine. Obviously the epoxy used to hold that dome lens on is allergic to moisture. Or I had a really fickle light.
As I kept telling all the companies that beta tested their products for over the past 20+ years: If there is a bug it will find me.
-
@Accujohn said:
You know I hate to break it you but that probably wasnt Tim Leatherman.... It's usually just a guy in a Tim Leatherman suit. Might have even been a female in there. Anyway, Im sure it was still magical, like seeing Mickey Mouse when you first step into the Magic Kingdom. Don't let it get you downNow you're just being mean >:(
;)
-
Very cool everybody! I'm glad Bob got to Portland after all this time, and looks like you were all very well rewarded.

So, did anyone put in a good word for the ol' KF4? :D
We sure did Luke!
And hopefully it didn't fall on deaf ears. :)I knew I could count on you, Bob. :D
-
@J-sews said:
There were juicy tidbits, but most of it was interesting stuff about retired and existing tools. We did gain some insight into how the new tool developement process works at Leatherman, including the news that it usually takes about two years for a new product to go from concept to production, and learned about some of the many steps along the way. :)But other than hints that there were more new projects in the pipeline (and there are ALWAYS new projects in the pipeline at Leatherman) the only upcoming release that was confirmed was the Rebar, coming out next spring.

I don't think I'm alone when I say: What interesting stuff do you speak of?
-
Yeah, What does Tim EDC?

-
Awesome

Can't wait to hear about this

Did this ever get explained? I'm curious as to what was going on!
Also, what does Tim EDC?

I believe it is to show the strength of the wire cutters, but I could be wrong.
-
It's to use your weight to help force the cutters through heavier items like nails.
Def
-
Tim's EDC tool is a factory stock Charge Ti :) He likes to demonstrate the tool's ability to withstand heavy duty cutting chores. First he places a large steel nail in the jaws of his Charge. The nail is so large that ordinary hand pressure alone is not enough to cut through it. So the Charge is rested in a specially made 'cradle' (see photo below) The cradle is then set down on the floor, with the clear plastic box placed over it so that bystanders aren't hit by pieces of flying nail when it gets cut through. Tim then steps on the handle of the Charge and puts some weight on it. CHUNK! and the nail is in two pieces.
Afterwards, he picks up the Charge and shows us how the wire cutters - which we have just seen cut through a heavy steel nail - are still sharp enough and tight enough to make slices in a paper business card.
Most impressive.


-
Gosh, my Charge TTi is loose in the pliers and won't cut paper or a business card anymore. Haven't cut anything heavy either. Is that the secret to keeping the pliers taut?
Have tried using a flat punch to get that pivot back in tighter yet lacking a suitable 1# or 2# maul to whack it back into place properly.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login