Broken Squirt PS4
-
The pliers on my squirt are not quite working right. You know how they should spring back, well that little spring thing on both sides of the plier head is not springing back. It sticks and won't let the spring disengage and the pliers work right. I thought maybe a good cleaning and oiling would help but nope it didn't. I don't want to send it in as it has torx screws and not rivets so I'm afraid instead of fixing it they would just replace it. Any help would be appreciated. Thanks Ash
-
Your Squirt has the same spring mechanism as a Micra, and I've gotten a few Micras over the years that have had the same problem Ashley. The cause is usually that some sort of sticky stuff has gotten between the little spring things and the scissor head. (plier head on your PS4) A good cleaning and oiling tends to do wonders.....but you've already tried that.

Do you have a couple of the correct size torx bits? You could try backing each pivot off a quarter turn and see if that helps. :)
-
Look also to see if there is a burr on the wire cutter. Even a small irregularity there will cause the plier head to bind. That may not be your prob, but if so its easy to fix by smoothing out the burr with a file.
-
If you do end up sending it in for repair include a note that says the tool has sentimental value and you would like to have it repaired not replaced. They will accommodate you if at all possible. Somewhere in their warranty policy it spells this out.
-
I sent my PS4 in last week for a similar reason. There was something funny with the backspring and the pliers head that would "click" when squeezed and then the spring part would sort-of disengage... :-\


-
Local dealer (Mi Thita)
-
Had the same thing on a new riveted one. It looked like a slight burr on the one back-spring, but it cleared up after a few dozen flexes.
Perhaps a disassembly and inspection will lead to a simple fix
-
I sent my PS4 in last week for a similar reason. There was something funny with the backspring and the pliers head that would "click" when squeezed and then the spring part would sort-of disengage... :-\
Yup kinda like my problem.
I juts got a phone call from the local reps, saying they received my LMs (also sent my bro's TTi with broken pliers head) and that their service manager will get back to me with the cost of the repair... :-\ I hope they'll get it right this time, as my I/O with these guys hasn't been the best in the past. Fingers crossed...
-
Cost of the repair? I would think that the repairs would be covered by the Leatherman warranty. I've never heard of a Leatherman owner being charged for a repair.
-
@MeadMaker said:
Cost of the repair? I would think that the repairs would be covered by the Leatherman warranty. I've never heard of a Leatherman owner being charged for a repair.You will be surprised by how much it costs to have a leatherman tool repaired "for free" in some countries.... >:(
-
Cost of the repair? I would think that the repairs would be covered by the Leatherman warranty. I've never heard of a Leatherman owner being charged for a repair.
You will be surprised by how much it costs to have a leatherman tool repaired "for free" in some countries.... >:(
If you contact Leatherman in the States and let them know that you are being charged for warranty repairs, they will contact the representative/distributor and take care of the issue very aggressively.
-
I actually did contact leatherman in the States, a couple of months ago on both the Email addresses given on their customer service site, and even posted on their facebook site at the beginning of this month, citing all the details of my problem with a Style CS and have not got a reply yet, so either they can not do anything or they could not care less.
Anybody interested can check on leatherman’s facebook wall, first few days of this month (I think the 3rd or 4th…). I am the good looking one complaining about the Style CS repair cost. I was going to post here about this but I was still hoping for an answer from leatherman customer service, and I could not be bothered to start a topic about it, yet….
I still like their products, do not get me wrong, I just buy them without expecting any warranty work to be done. If they are problematic then it is my problem, not theirs.
-
Anybody interested can check on leatherman’s facebook wall, first few days of this month (I think the 3rd or 4th…).
Couldn't find it, went back to the 30th. PM me the exact quote, and I'll repost it, and maybe get some attention.
It was posted, according to my Facebook pages (may depend on timezone) on the **1st of October ** at 15:46.
Here it is:
*I send an Email to toolwarranty@leatherman.com and info@leatherman.com on the 19th of August and had not had a reply yet. It was sugested to me to post the email here so as to get a responce.
Here it is (shortened):
"Dear leatherman customer service personnel.
I have purchased a leatherman style CS from a US seller.
After a few days the backspring mechanism supporting the blade broke off.
... pictures here:
http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_2358.jpg
(more in the email)
......
As the local dealer, in Cyprus where I live, requires the equivalent of $60 (30 Euro) to repair leatherman items under warranty (more than the cost of the item, making the 25 year warranty useless) please let me know if this can be sent to you directly for repair.Many thanks.*
As I said before, nothing I am really worried about, which is why I have not mentioned it before, just their policy I assume.
-
(in a soft monotone voice):
"I'm sorry Dave, There must be some mistake... Leatherman would never do anything that could ever draw criticism. They are doing god's work, and you must be mistaken. Just send them your tool... All they care about is your peace of mind." -
@Accujohn said:
(in a soft monotone voice):
"I'm sorry Dave, There must be some mistake... Leatherman would never do anything that could ever draw criticism. They are doing god's work, and you must be mistaken. Just send them your tool... All they care about is your peace of mind."Actually, it's been my experience that it would sound more like this:
"I apologize that you are having difficulties, customer satisfaction is our priority. I'll get in touch with them and make sure they start complying with company policy. If you can't find satisfaction, let me know and I'll send a new tool directly to you."
Just saying...
-
Didn't sound like anything close to that happened. Dont get me wrong, i love leatherman. I just realize they arent perfect.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
