Leatherman(New Wave) adapted to regular 1/4" hex bits.
-
Nope never did... I quite looking when i lost my wave mid summer, and since i replaced it with a spirit... Come to think of it I have since lost track of that modded driver..
G.
-
I didn't kknow that leatherman was giving out an accessory like that.
-
They aren't giving them away anymore, they are for sale.
-
That my friend is a slick little unit ya got there. Looks very well made and very good in the fit dept.
-
How do you like a separate rachet tool? Otherwise, you may want to modify a racheting screwdriver (BIG PROJECT!).


-
I recently acquired a "L" (or "7" depending on which way you hold it) shaped hex bit driver to carry, It even has a pocket clip!
Anyway, I wonder how great bit adapters on multi tools are.
In many way they make sense, but there is still something odd.and having to add (and carry) an extra whatzit just adds more doubt.
Anyway, it seems nice what you have done, let us know how it stands up to some use.
-
Yah i can see a ton of wasted ratchets on my workbench now. And most likely a ton of band aids also.
-
I really think the idea of a ratchet implemented into an extension bit is a great idea. It would allow any bit driver to have a ratchet.
-
There are three possible ways to do it:
- Turning the handle (Red): You can use the screwdriver mechanism.
- Use the handle as a lever (Green and blue): You can shorten the handle of an L-shaped tool and weld an adapter to it.

-
Hi, guys, I've been reading here a few weeks and appreciate a lot of the stuff I've learned from y'all (thanks), but hadn't had a need to post anything until now. Just thought I'd pass on something I'd found regarding a "ratcheting" device for 1/4" bits that can be used with a Leatherman. A few weeks ago I had seen a bit holder ground down so it would fit the LM bit driver and decided to make one for myself as well. I did and it works great. Now I carry it along with several 1/4" bits so I can turn just about any screw or bolt/nut (up to 7/16") I come across.
Several months back I had purchased a Bit Dr. from Loggerhead Tools http://loggerheadtools.com/index.php?main_page=page&id=6&chapter=1. While I've not been impressed with the bits that were provided themselves (I've broken three already, with not a great deal of torque - although Loggerhead did send a free replacement set when I emailed them), it did also come with a so-called free-wheeling/ratcheting mechanism that I like very much. It takes a little getting used to, but once you do, it becomes very handy. The Bit Dr. also includes an extension that I carry along with the ratcheting mechanism. Both ratchet and extension have 1/4" male and female ends. These two pieces are all that I carry of the Bit Dr. now, but I find them very useful. It might be a little steep for just these two parts, but if you're really interested in a simple, small, effective ratcheting mechanism for driving 1/4" bits, it might be something worth considering.
Tim
-
That free-wheeling/ratcheting mechanism doohicky looks pretty clever. I've read the description a couple times, but I still don't quite understand how it works. Can you describe it a little better or post a couple pictures?
-
Yes, I'd like to know more about it as well!
Is the ratchet gizmo this little thing here? So it can be coupled into any standard 1/4" drive, converting it to ratchet action?

-
Well, after reading this thread, I decided to have a crack at this myself with a spare extension. Not having a grinder though, I had to hold the extension in the jaws of my Fuse whilst attacking it with the file on my
SurgeSURGE!!.Needless to say, it took a fair bit longer and I picked up a few war wounds along the way due to slippage of the file, but the end result was roughly the same. :D
-
@flapjackboy said:
Well, after reading this thread, I decided to have a crack at this myself with a spare extension. Not having a grinder though, I had to hold the extension in the jaws of my Fuse whilst attacking it with the file on mySurgeSURGE!!.We can tell you have been paying attention.
Big welcome to the new guys!!

-
Thanks Benner. My collection isn't much compared to some of you lot, in fact I've just recently gone down from a Fuse, Charge Ti and a SURGE!! to just the Fuse and the SURGE!!. Don't worry though, the Charge did at least go to a good home. I sent it to my mum for her birthday as she's travelling out to South Africa next month to do some voluntary work and I figured she'd find it useful.
-
@flapjackboy said:
Thanks Benner. My collection isn't much compared to some of you lot, in fact I've just recently gone down from a Fuse, Charge Ti and a SURGE!! to just the Fuse and the SURGE!!. Don't worry though, the Charge did at least go to a good home. I sent it to my mum for her birthday as she's travelling out to South Africa next month to do some voluntary work and I figured she'd find it useful.Handy gift that mate! So is it just Leatherman so far or do you own any other brands? I like Leathermans and own quite a few of the retired models now.
-
At the moment, it's just Leathermans. There's a great shop here in Norwich that sells LM, Gerber and SOG MTs and will gladly get them out for you to compare them. I tried some of the Gerbers, Vics and SOGs, but always ended up coming back to Leathermans because for me, they just as if they were of a much higher quality.
That's not to say that Gerbers, Vics or SOGs are of a lesser quality as I know there's lots of people here who prefer those brands.
-
So you live near our Dunc then. :) I have never seen a shop like that before. Can't think of any like that around here. I live in Kent.
-
It's this place. Very much a place for the chattering classes and farmers to go to buy their clothes from.
-
@flapjackboy said:
It's this place. Very much a place for the chattering classes and farmers to go to buy their clothes from.I am sure Dunc has mentioned that shop actually.
The closest think I have to that round here is Millets and they had 1 Leatherman and a SAK and they were displayed in a locked glass cabinet near the tills. I got the impression that touching wasn't allowed. ::)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login