Cruxspension
-
If I still had it I would! I traded it for a Benchmade Mini Grip! The funny part is he thinks he ripped ME off!
-
@J-sews said:
It wouldn't surprise me to find out that the Suspension has been Gerber's biggest seller since hitting the marketplace a couple years ago....Like it or not, the Suspension is a popular tool.After using it extensively over months I've owned one, I still love my Gerber Suspension!
Things about Suspension I like:
-One hand opening blades
-Outside opening tools
-Locking system is positive and easy to use
-Wharncliffe plain edge blade
-Sheepsfoot serrated blade
-Very decent scissors
-Spring loaded pliers - love using them
-Wide, grippy, comfortable ergonomics
-Cool looking, titanium coated handles
-Unusual styling
-Less than 30 bucks at Lowes!I use my Suspension almost exclusively around the house for small repairs and yardwork, applications for which it works well. Great for small electrical type repairs. I like the pliers enough so that I often use them in preference to dedicated needle nose pliers.
I don't consider Suspension to be a heavy duty tool - I bought a SOG Powerlock for the heavy duty stuff - but I greatly appreciate its ease of use and improved ergonomics compared to my SOG and Leatherman tools.
.
-
@Leatherman123 said:
If I still had it I would! I traded it for a Benchmade Mini Grip! The funny part is he thinks he ripped ME off!So it is crap in your eyes but not his? I guess he could be a member of the brigade that might have bought a Suspension if he had not been able to ?dump? his Mini Grip on you. Have you not thought he may have needed pliers more than a knife so any make would have been better for him. Personally as I often worked up ladders I dislike butterfly openers of any kind and the Suspension is just one of those. I do not like the way Gerber are casting the sliders to one side. I would like to see the carbon cutters fitted to all the sliding head models and for them to develop a slider with a new all metal sliding mechanism that did not rattle just to kill one of the gripes many people have against the design, I realize it would have to have a ball race or something so would probably cost a small fortune but that price difference would quiet that criticism. If they wanted one that did not rattle they could buy it or settle for a normal one, their choice. As long as it was a true one hand opener that does not try to jump out of your hand every time you open it.
Dave
-
The suspension does look good, thou I don't care for the new versions. I almost fell for it too, but I ended up with a wave.
-
Here's a link to the Gerber page at the Multitool Encyclopedia: https://wiki.multitool.org/tiki-index.php?page=Gerber
I just added the pages for the Crux, Method, and Suspension.
The encyclopedia is supposed to be just the facts, just the details. Sometimes its hard to keep the "opinions" from showing through. ::) :D
-
Well I still dont like it, but I did decide I will give it one last try. I will only carry it for one week. I will carry no other blade or tool and I will see what happens.
Other than that great write ups.
-
@hawkchucker said:
Well I still dont like it, but I did decide I will give it one last try. I will only carry it for one week. I will carry no other blade or tool and I will see what happens.Other than that great write ups.
Well I will say that is damn fair-minded of you Hawkchucker. :D
Question for you while we're on the subject: how well do those anvil-type wire cutters work? Most wire I have cut previously with multitools having bypass-type cutting edges. The Suspension and kin have anvils that come together and almost touch. Do they work for you?
-
Actually I got to say That is the one thing that they did right on them. I like anvil cutters better. Ya see if you overload the tool they dont lock up like the bypass do. You can actually "walk" your way through a cut better. At least that is my 2 cents for what its worth.
However this is my second suspension. The first one was brought back to wallyworld. I broke the rivit that holds the plier pivot joint together. It just popped while trying to cut coathanger wire. It actually was either a pot metal or aluminum.
-
However this is my second suspension. The first one was brought back to wallyworld. I broke the rivit that holds the plier pivot joint together. It just popped while trying to cut coathanger wire. It actually was either a pot metal or aluminum.
Which rather defeats any advantages anvilcutters might have eh.
-
However this is my second suspension. The first one was brought back to wallyworld. I broke the rivit that holds the plier pivot joint together. It just popped while trying to cut coathanger wire. It actually was either a pot metal or aluminum.
Which rather defeats any advantages anvilcutters might have eh.
Indeed. :P
-
Actually the only time I thiink this is an issue is this tool. It has alum. for the pivot. I really think that is kinda lame.
-
@hawkchucker said:
Actually the only time I thiink this is an issue is this tool. It has alum. for the pivot. I really think that is kinda lame.Question to Bob, can you do a magnet test on all the Gerber butterfly pliers you have to see if they all are aluminum, please.
Dave
-
The Suspension handles are steel. I'm guessing stainless steel, but with the titanium nitride plating, heck it could be ordinary steel underneath.
The Method and the Crux have cast aluminum handles. (for reference, the Crux weighs in at 7.8 oz (219g), which is a full ounce lighter than the steel Suspension)
-
The Suspension handles are steel. I'm guessing stainless steel, but with the titanium nitride plating, heck it could be ordinary steel underneath.
S/S non magnetic.
-
It wasnt the handles guys that broke. It was the pivot.
-
@J-sews said:
The Suspension handles are steel. I'm guessing stainless steel, but with the titanium nitride plating, heck it could be ordinary steel underneath.The Method and the Crux have cast aluminum handles. (for reference, the Crux weighs in at 7.8 oz (219g), which is a full ounce lighter than the steel Suspension)
Bob
It was the pivoting rivet part that broke on 'hawkchucker's' suspension (as I understand it) now if all these Chinese model butterfly opening tools have been changed to IMO an inferior grade metal just to keep the cost down (even if aircraft grade) I for one could not recommend the tools to anyone. I also would consider a S/S less than 420c iffy for the pivot or head on a working plier (OK for a back up tool I guess) but we could only guess the grade of a S/S component even with a spark test. To hell with rust/staining, strength is what is needed in a working plier head and especially the pivot.Dave
-
@hawkchucker said:
Actually the only time I thiink this is an issue is this tool. It has alum. for the pivot. I really think that is kinda lame.I just carefully looked over my Suspension, and I don't believe it has any aluminum parts in it, period.
I checked handles, pivot pins, implements, pliers, and lock releases with a small magnet. Magnet sticks to all those parts, meaning they all contain iron.
So, they are some type of steel, most likely stainless steel from the look of them and the fact they exhibit no rust after several months of use.
Maybe it's not the best grade of stainless, but the implements have held up well so far after doing a fair amount of work around house and yard.
The Titanium-Nitride coating on the handles seems quite tough, it looks cool, and has held up well so far in use.
I didn't expect the Suspension would be made of A2 stainless tool steel with 154CM knife blades, because I picked it up for $28 at Lowes!
.
-
The Suspension handles are steel. I'm guessing stainless steel, but with the titanium nitride plating, heck it could be ordinary steel underneath.
S/S non magnetic.
A common assumption, but not true. Check your PST with a magnet.
300-series stainless steels are non-magnetic, due to a high nickel content, but very soft for the same reason. This grade is not suitable for tools of any kind. Highly corrosion resistant. (303, 304, 316, 18-8 are common examples in the USA)
400-series stainless steels have a higher iron content, can be hardened, and do stick to a magnet. This is what tools, knives, and firearms are made from. The tradeoff for being hardenable is a much lower resistance to corrosion. (416, 420, 440C are common examples)
-
Hawkchucker, I did not take my Suspension apart, but it appears that all the pivot screws on mine are stainless steel. Weird that one of yours was pot metal or aluminum. I can certainly see how such a pin would fail easily.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login