Please, no more...
-
@Roadie said:
I think we're gonna have to agree to disagree on this one! I can see just as much detail in both pictures, but if you prefer the red one there is nothing i can do about it and its your right to have your own opinion. The world would be boring if everyone liked exactly the same thing.Roadie
Roadie, I just carefully re-examined your red bg vs. white bg pics. I looked at them on three different monitors.
I can't imagine how you can not see that the red bg pics show superior surface detail. Aside from esthetic differences, the greater discernable surface detail is clearly visible if you look closely.
Look at the Victorinox shield logo in the white bg and red bg pics. Can't you see a big difference?
Look closely at the pivots and rule marks in the other white bg and red bg pics. You really can't see a difference?
.
-
@ringzero said:
...close up photos of tools photographed against light backgrounds.Thought about posting this in the camera/photo forum, but thought it would get better exposure here.
I'm not the greatest photographer - in fact, right now I don't even have a functioning digital camera.
Nevertheless, I'm going to offer a tip on how to NOT photograph multis, knives, etc.
Please don't set them against any light-colored background (white being about the worst) such as a piece of paper, white countertop, magazine page, etc.
The contrast between the light background and the object in the foreground - multi, knife, flashlight, gun, etc. - typically OBSCURES the object being photographed.
Black or darker colored objects fare the worst, but this is a problem with even lighter colored objects.
Often, all that will be visible is the outline of the object and mere hints of surface details.
If you're going to go to all the trouble to take and post photos, please don't do this.
My thanks to all of you who do post photos, most of which are beautifully done.
.
I cant see a problem with it myself

Dunc
-
@Spoonrobot said:
Black oxide, on the other hand, really shows up a lot better on my camera when placed on the wooden background.

Spoon, are you using automatic settings?
This appears to be a poor example to me, because the focus in the second picture is clearly on the background, not the tool. The exposure and/or lighting are drastically different between the two pictures also.
EDIT: Looking at it again, the focus looks good. The lighting on the tool makes all the difference.
-
I have found this thread very interesting. I have to say that I like white backgrounds. I have no problem seeing the details of the object being photographed.


I see your point that sometimes the white of the background can overpower whats in the picture. Like this one

-
@ringzero said:
Roadie, I just carefully re-examined your red bg vs. white bg pics. I looked at them on three different monitors.I can't imagine how you can not see that the red bg pics show superior surface detail. Aside from esthetic differences, the greater discernable surface detail is clearly visible if you look closely.
Look at the Victorinox shield logo in the white bg and red bg pics. Can't you see a big difference?
Look closely at the pivots and rule marks in the other white bg and red bg pics. You really can't see a difference?
Yes i can see a tiny difference but in no way is it as huge a deal as you seem to be making it on both i can clearly see the individual markings on the ruler and the Vic shield. With a bit of adjustment in your favourite photo editing software you can easily retrieve the extra couple of percent of detail. But if you look at the bottom of the tool where the two handles meet you can easily see more on the white background on the red one the tool has become coloured red and makes it difficult to determine what is going on there.

-
White back ground shots are a standard shooting style for any technical photo. That is the reason why light tents and light boxes are sold, not so much in your local photo equipment shop but pro shops will stock them.
I think you could have made your point better if you had mentioned that high contrast images were a problem for you and others that may have the same problem as you have, rather than saying a style of photographing this type of image was wrong.
The trouble with using dark back grounds is shown in the <u>top one of spoonrobots</u> 2 shots were the back ground becomes 'full of clutter'. In fact a back ground can steel the shot when using the wrong background. IMO The standard of photography on this group is rising to almost pro levels but after you have pointed out the high contrast problem maybe the contrast could be lowered by using less intense light through shooting the flash through tissue or white fabric guys to produce a slightly grayed background.
Taking the gamma down on your monitor may help if it is also affecting your reading of print.
(added)
<u>Most of the "less detail" on the black tools are caused when the background has overwhelmed the light reading by the camera and caused underexposure of the tool. As most camera phones and digital cameras have no manual exposure setting the way round it is to use a spot reading from the tool if available or lift the exposure in some program like Ifanview before posting it (you can also drag a photo yourself to the desktop and alter any settings yourself just to see what you are missing).</u>Dave
under lined has been altered or added
-
Black oxide, on the other hand, really shows up a lot better on my camera when placed on the wooden background.
http://img.photobucket.com/albums/v14/redmodels/DSCF1750sdvdv.jpgSpoon, are you using automatic settings?
This appears to be a poor example to me, because the focus in the second picture is clearly on the background, not the tool. The exposure and/or lighting are drastically different between the two pictures also.
EDIT: Looking at it again, the focus looks good. The lighting on the tool makes all the difference.
The camera is set to manual exposure settings but everything else is automatic. The lighting and placement relative were all the same. I took this picture a few times with the tool positioned differently and they all came out about the same. Focus was set to Macro and auto-focused on the tool.
At least with my camera, with the light set-up I have, white tends to pull the camera in too much and drown out the fine detail on black oxide tools.
-
@damota said:
White back ground shots are a standard shooting style for any technical photo. That is the reason why light tents and light boxes are sold, not so much in your local photo equipment shop but pro shops will stock them.It may be common for technical photos, but constrast problems militate against it for the average photographer. I know one commercial photographer who recommends avoiding it if possible.
I see the same issues over and over in white background photos, sometimes even in catalogs printed on slick paper with high resolution photos trying to sell expensive stuff.
@damota said:
I think you could have made your point better if you had mentioned that high contrast images were a problem for you and others that may have the same problem as you have, rather than saying a style of photographing this type of image was wrong.I asked people to please stop the white background pics because I believe that most of them are inferior, both technically and in an esthetic sense.
I wouldn't ask, nor would I expect people to conform their photos to suit anyone's particular visual problems.
And, I never said white background photos are wrong.
I believe most of them are inferior, if the purpose of the photograph is to convey useful information to the viewer.
If the purpose of the photograph is primarily 'artistic,' then anything goes.
.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login