What Did You Use Your Multitool For Today?
-
I used the file on my Blast to smooth out two rough areas on a cheap, plastic pirate ring that my 10 year old got today. Sure, I could have walked to the basement to grab a file, but then I wouldn't have an excuse to carry an MT.
-
I used my PS4 scissors to trim a few nails and the file to smooth them out. Also used the wire cutters on the PS4 to cut a bobby pin and think it might of bent them a little. My friend told me it wouldn't cut it, but he was wrong. It was worth it. :D I also cut everything under the sun with the PS4 scissors. Dang there small but they get the job done.

-
"The same thing I use it for every day, Pinky..."
-
-
Gerber MP700 for package opening, splaying cotter pins and tightening phillips screws and nyloc nuts while assembling and testing some 38kW heaters. Other miscellaneous opening tasks and pulling rogue bits of metal out of places they shouldn't be too. Not often I need/use a Phillips on a MT but the 3D driver on the MP700 worked a treat - not to mention the guy I was working with walked the full length of the workshop to get a dedicated Phillips driver and I'd got both heaters built up by the time he got back :D :D
... and the day is still young :)
-
Used my Farmer to free its' newly-arrived little brother, the Cadet, from its' packaging :).
-
@50ft-trad said:
Gerber MP700 for package opening, splaying cotter pins and tightening phillips screws and nyloc nuts while assembling and testing some 38kW heaters. Other miscellaneous opening tasks and pulling rogue bits of metal out of places they shouldn't be too. Not often I need/use a Phillips on a MT but the 3D driver on the MP700 worked a treat - not to mention the guy I was working with walked the full length of the workshop to get a dedicated Phillips driver and I'd got both heaters built up by the time he got back :D :D... and the day is still young :)
:o
Does your electric meter make a buzzing noise?
-
@50ft-trad said:
Gerber MP700 for package opening, splaying cotter pins and tightening phillips screws and nyloc nuts while assembling and testing some 38kW heaters. Other miscellaneous opening tasks and pulling rogue bits of metal out of places they shouldn't be too. Not often I need/use a Phillips on a MT but the 3D driver on the MP700 worked a treat - not to mention the guy I was working with walked the full length of the workshop to get a dedicated Phillips driver and I'd got both heaters built up by the time he got back :D :D
... and the day is still young :)
:o
Does your electric meter make a buzzing noise?
:D No, but the kerosene jets and flames make a lovely roaring sound ;)
-
Used the micra for some wire stripping with its modded Flathead into a chisel/wire stripper. I used the rounded portion as the wire was pretty thick. I honestly didn't need to strip any wire I just wanted to use it. Turns out it worked like a dream. I couldn't ask for it to work any better than it does.
(Thanks Steve) :D I have been carrying this Micra off and on for a few days now and am thinking it might be replacing my PS4 in a EDC roll. :ahhhSorry for the cell phone picture.

-
@captain spaulding said:
Used the micra for some wire stripping with its modded Flathead into a chisel/wire stripper. I used the rounded portion as the wire was pretty thick. I honestly didn't need to strip any wire I just wanted to use it. Turns out it worked like a dream. I couldn't ask for it to work any better than it does.
(Thanks Steve) :D I have been carrying this Micra off and on for a few days now and am thinking it might be replacing my PS4 in a EDC roll. :ahhhI still find it impressive that something as small as the Micra can be so fantastically useful in so many scenarios
<wandering thought>
Capt said replacing PS4 in EDC roll. He means "role" of course - heck, I'm pretty handy with typos too ... but EDC Roll ... EDC ROLL ... EDC ROLL!!! :ahhh :ahhh Brilliant!!! Ditch the mini EDC organiser and switch to a pocket sized tool roll! Sounds great - but is that viable? Where do I start? Do I go from fresh or modify a stock item? Canvas or leather? Maybe better as a kind of tri-fold wallet than an actual roll to stop it being too cylindrical. Definate potential there. Bugger - that's another project I'll never find time for
Saves trying to tailor your kit to suit someone elses design though - they're never the right size and shape - base the roll/carrier around the kit. Still need to keep it flattish and pocket sized though. Hmmm, interesting ... but needs a shedload more thinking about before it can be classified as one of those fantastic ideas that I'll never carry through ::)</wandering thought>
I still find the Micra a little too large for key carry though and I always need to have it paired with something rather than stand alone (hence the birth of my Micro Tool Tin). I really like the Spirit style mods on there Capt

-
@50ft-trad said:
@captain spaulding said:
Used the micra for some wire stripping with its modded Flathead into a chisel/wire stripper. I used the rounded portion as the wire was pretty thick. I honestly didn't need to strip any wire I just wanted to use it. Turns out it worked like a dream. I couldn't ask for it to work any better than it does.
(Thanks Steve) :D I have been carrying this Micra off and on for a few days now and am thinking it might be replacing my PS4 in a EDC roll. :ahhhI still find it impressive that something as small as the Micra can be so fantastically useful in so many scenarios
<wandering thought>
Capt said replacing PS4 in EDC roll. He means "role" of course - heck, I'm pretty handy with typos too ... but EDC Roll ... EDC ROLL ... EDC ROLL!!! :ahhh :ahhh Brilliant!!! Ditch the mini EDC organiser and switch to a pocket sized tool roll! Sounds great - but is that viable? Where do I start? Do I go from fresh or modify a stock item? Canvas or leather? Maybe better as a kind of tri-fold wallet than an actual roll to stop it being too cylindrical. Definate potential there. Bugger - that's another project I'll never find time for
Saves trying to tailor your kit to suit someone elses design though - they're never the right size and shape - base the roll/carrier around the kit. Still need to keep it flattish and pocket sized though. Hmmm, interesting ... but needs a shedload more thinking about before it can be classified as one of those fantastic ideas that I'll never carry through ::)</wandering thought>
I still find the Micra a little too large for key carry though and I always need to have it paired with something rather than stand alone (hence the birth of my Micro Tool Tin). I really like the Spirit style mods on there Capt

Wow kinda went off on a mini rant there for a sec. :D There were no typos. I will be adding the Micra to my EDC roll. Here's the pic.

:D :D :D
Alright i'm just kidding on the roll thing. Glad you like the mods. I love them and once again it would not have happened if Steve was not so kind as to do them for me.

-
@captain spaulding said:
Wow kinda went off on a mini rant there for a sec. :D There were no typos. I will be adding the Micra to my EDC roll. Here's the pic.
:D :D :D
Alright i'm just kidding on the roll thing. Glad you like the mods. I love them and once again it would not have happened if Steve was not so kind as to do them for me.

Rant? Nah, just a few exuberant meanderings :D :D :D
You nearly had me for a second on the tool roll too
I think a pocket sized version would be great if it's do-able though. I'm pretty sure my trousers wouldn't take kindly to me stuffing the pictured version in them - besides, I'd look like I was trying to emulate the new Leatherman "Wingman" character in the errrmmm .. speciality movies he appears to be from ::);)
-
@50ft-trad said:
You nearly had me for a second on the tool roll too
I think a pocket sized version would be great if it's do-able though. I'm pretty sure my trousers wouldn't take kindly to me stuffing the pictured version in them - besides, I'd look like I was trying to emulate the new Leatherman "Wingman" character in the errrmmm .. speciality movies he appears to be from ::);)
I think a mini tool roll might be feasible especially if you could carry it on your belt.
HAHAHA yea people might give you weird looks with a "bulge" in your pocket.
-
Did a small comparison this evening...
Needed to change a light bulb in haus, in order to do that I needed to fiddle w/two small screws, standard flat screwdriver job. So I took LM Fuse and CyberTool41...
Screws are in tight spot, in bit less than an inch from celing, so first I took Fuse, opened small flat screwdriver and was thankfull that it's long enough (think that LM Wave bit would be enough), after a while the screws were untighten. I changed the light bulb and then it was time to screw them back. Now I took CT41, opened a bit driverand exchanged bits, flat small bit on place, and in a pinch screws were tighten again...
Result: CT41 wins this one in my book, it was way easier to work with this one in tight place and my hand didn't stuck to ceiling as much as with LM. I reckon that's due to bit holder position which is more centered oposed to LM flat screwdriver which is on far end of tool, and that result in more "axial" throwing....
P.S. Though the lanyard fob looks great on CT I think I'll take it off, it was too many times "on way" than I'd like...
-
When I was on a bike ride today, I came across two spots heave with tornbush blocking the way. 10 minutes and the saw, wire cutters, and serrated blade of my XTi later and there was a clear trail to ride on. After the ride, when I was cleaning it, I accidentally got a nasty cut from the serrated blade
-
@captain spaulding said:
@50ft-trad said:
@captain spaulding said:
Used the micra for some wire stripping with its modded Flathead into a chisel/wire stripper. I used the rounded portion as the wire was pretty thick. I honestly didn't need to strip any wire I just wanted to use it. Turns out it worked like a dream. I couldn't ask for it to work any better than it does. :tu: (Thanks Steve) :D I have been carrying this Micra off and on for a few days now and am thinking it might be replacing my PS4 in a EDC roll. :ahhh
I still find it impressive that something as small as the Micra can be so fantastically useful in so many scenarios
<wandering thought>
Capt said replacing PS4 in EDC roll. He means "role" of course - heck, I'm pretty handy with typos too ... but EDC Roll ... EDC ROLL ... EDC ROLL!!! :ahhh :ahhh Brilliant!!! Ditch the mini EDC organiser and switch to a pocket sized tool roll! Sounds great - but is that viable? Where do I start? Do I go from fresh or modify a stock item? Canvas or leather? Maybe better as a kind of tri-fold wallet than an actual roll to stop it being too cylindrical. Definate potential there. Bugger - that's another project I'll never find time for :bnghd: Saves trying to tailor your kit to suit someone elses design though - they're never the right size and shape - base the roll/carrier around the kit. Still need to keep it flattish and pocket sized though. Hmmm, interesting ... but needs a shedload more thinking about before it can be classified as one of those fantastic ideas that I'll never carry through ::)
</wandering thought>
I still find the Micra a little too large for key carry though and I always need to have it paired with something rather than stand alone (hence the birth of my Micro Tool Tin). I really like the Spirit style mods on there Capt :tu:
Wow kinda went off on a mini rant there for a sec. :D There were no typos. I will be adding the Micra to my EDC roll. Here's the pic.

:D :D :D
Alright i'm just kidding on the roll thing. Glad you like the mods. I love them and once again it would not have happened if Steve was not so kind as to do them for me. :salute:
I use a very similar type of roll for the tools I carry on my bike. Here's a link for it if anyone is interested.
I don't have a pic, but typically carry 2, 3, 4, 5, and 6 mm Bondhus hex keys, 8, 9, and 10 mm Snap-On stubby combo wrenches, a spoke wrench, chain tool, patch kit, spare tube, and tire levers in it. I've been considering putting my new Crunch in there with that stuff as well.
I think a roll is better for dedicated tool use, and something like the MaxPed EDC organizer is better for something like a FAK or a survival kit. I always cringe when I see people stuffing tools and lights and a handgun all into one of them... In my opinion, that's just asking for trouble.
-
I used my Rescuetool to "Rescue" the Beverages inside a couple of Bottles marked Budlight..The Micra was great when I worked for a Manufacturer's Rep ages ago and had to Calibrate Gauges after mounting them and filling them on a Diagaghram Assembly
-
My Farmer handled the most important job of the day-cutting a calzone at lunch. :)
-
@jerseydevil said:
My Farmer handled the most important job of the day-cutting a calzone at lunch. :)MMMMM....... Calzone.

-
I used my SRM 763 (has a bottle opener thus it is a multitool..) to open a box containing 8 LM tools....

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
