Charge Owners club !
-
How is this for 154CM?

Its got 2 slots, one for sharpening a dull knife, and one for refining the edge, alo it had a rod as seen in pic.
-
@Agent X68 said:
How is this for 154CM?
Its got 2 slots, one for sharpening a dull knife, and one for refining the edge, alo it had a rod as seen in pic.
Picked one of them up recently, along with a Lansky Pocket Crock Stick. Pull a small ceramic rod out for finer sharpening.

However I lost one of the sticks and haven't located it. -
@mvyrmnd said:
Thanks. What are people here using to sharpen/maintain their S30V blades?My favourite is the Spyderco Sharpmaker .Some of you may not agree with me but this is where I think the Wave is a more sensible option .If you don't know what your doing with sharpening S30V or 154CM you will be there for ages and could quiet easily make it blunter . Its not a steel for novices . The 420HC of the Wave can me made to be just as hair popping sharp and as long as you maintain the edge on a regular basis it won't give you any problem .Sometimes I think some people just go for the S30V because its considered better
My Wave will cut rope , seatbelts , fish heads , rubber hose , cheese etc. etc. just as well as my Charge will . I realise that S30V retains the edge for longer but I have never had a problem with 420HC .Just my two pennies worth .
-
Thanks. What are people here using to sharpen/maintain their S30V blades?
My favourite is the Spyderco Sharpmaker .Some of you may not agree with me but this is where I think the Wave is a more sensible option .If you don't know what your doing with sharpening S30V or 154CM you will be there for ages and could quiet easily make it blunter . Its not a steel for novices . The 420HC of the Wave can me made to be just as hair popping sharp and as long as you maintain the edge on a regular basis it won't give you any problem .Sometimes I think some people just go for the S30V because its considered better
My Wave will cut rope , seatbelts , fish heads , rubber hose , cheese etc. etc. just as well as my Charge will . I realise that S30V retains the edge for longer but I have never had a problem with 420HC .Just my two pennies worth .
That's a fair point, but moot, as you can't get a Charge TTi (which I bought for the tool selection, not the type of steel the blade's made from) with a 420HC blade.
So one way or another I have a S30V blade to keep sharp.
Thanks for the tips so far :)
-
Couple points:
I've been touching up my blades for years and it does take practice. Especially with harder steels. That said, i could have saved time and frustration by avoiding those little pocket sharpeners. Those require you to pull the blade through in an improper direction whic can only get a blade "barely sharp" it also wears away needless steel. Get a full sized smith or lansky sharpener with 4" long+ ceramic rods. Those rods are all you need if you touch up regularily and follow the provided instructions. You can then keep or make any good blade hair popping sharp -
The small tools really only serve one purpose, for sharpening the cut-hook. Hence the Smith sharpener has a tapered cone to sharpen that one spot that the other sharpeners can't touch. Pocket Crock sticks pop out of the case to give a finer edge to the cut-hook.
As for regular sharpening past that one area, Spyderco Tri-Angle Sharpmaker.

-
Yes, spyderco too.
-
I very much agree with you Dunc. I have some experience with knives and in my opinion the reason you get a steel like S30V, ZDP-189 or 3G is because you can sharpen at a more shallow angle. That's the real benefit! If you have a steel like that the whole idea to me is that it can maintain an edge angle of 12 - 15 degrees inclusive. (And then we're talking sharp) Otherwise I think it's just a waste of money.
If you don't know how to sharpen knives you're much better off buying something that's easy to sharpen. Victorinox blades are fantastic in that regard. I wonder how many people have been watching YT-vids and thought that they had to have a fancy steel and now sit on more or less blunt TTi's. ::)
If someone would present me with the choice of S30V or 420HC I would pick 420HC. Easier to keep razor sharp and helps you maintain the routine of sharpening your blade after use.
For sharpening in the field get a Fallkniven DC-4 stone and you're set to go.
For house sharpening I too recommend the Spyderco Sharpmaker. Too bad there's no slot for at least 20 degrees.
I like 154 CM, VG10 etc. Easy enough to sharpen if you have a little skill and it holds an edge well.
-
Welcome to the forums , and good post

-
Okay, here is my membership application.


For some reason the serrations are on the wrong side of the blade.
-
Why is that the wrong side? They are on the same side on my Charge. (membership pic to come)
-
Its on the wrong side because it is a righty opening blade and you can't see the sharp part of the serrations when you are cutting.
-
Membership application.

-
I will play too. XTi with S30V blade.
-
Count me in. Ive got a charge tti coming in the mail. I'll post pics when I get it.
-
Charge Club dual membership.

-
Question for you fellow charge heads... Anyone else notice a pronounced difference in grip comfort between using the pocket clip vs. not? I have the TTi but I imagine they are all similar. I am always tempted by the convenience of the clip but really love the feel of the tool without. Anyone else care, or not? :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login