Big Knife Passaround and Giveaway
-
The edge on the little one isn't blunt but its not really quite as sharp as I'd like. I tried slicing up the cover of the Yello Pages that dropped through the letter box this morning. It struggled. I then gave it a wash and proceeded to slice up an apple. This it managed but I would have been happier and had a little more control if it were that fraction sharper.
Here's a picture post apple. The juice has stained the metal. To be expected but I was a little surprised as time between slicing and washing was only the time it took me to eat the apple.

I've now put a new micro bevel on it and am much happier. The curve at the tip meant I had to use stones to get a decent edge right to the tip rather than a few strokes on the Sharpmaker that I use with my SAKs.
-
Nice work so far Neil. I suspect there's going to be a very healthy patina on that little one by the time it finds it's way to a winner. I'm with you on the small sheath too.
Great pics as always mate

-
Ouch, the scales on the MOD really are rough looking. Nice shots though mate. :)
-
Ouch, the scales on the MOD really are rough looking. Nice shots though mate. :)
Only for now... Buahahahaa I'm stoked to see what we end up with.
:D :D :D

-
Neil, You managed to have a play with the MOD knife yet?
;) -
Nope :(
It was meant to assist in tree felling duties but the tree in question has had a reprieve >:(
I'll be forwarding the knives on Monday. Hopefully I'll get to try it on something over the weekend.
The little knife has been hanging around with me doing a lot of the duties I'd normally pass to my SAK, so sorry to the folk further down the line for its already less than pristine condition.
-
Well it's good to hear the little 'un has been active mate
What was it like to use?
Let's hope you can give something a "tickle" with the biggun before you pass it on mate ;) -
Guess which knife I used for carving this year :)

-
Yes stabbing it in the eye; the only way to kill a pumpkin!!!!
-
Just to give you an idea how thin the blade is on the little knife, mines well abused but still going strong



-
A big thanks to neil, they landed on saturday but been a manic weekend, i love the extra thant neil threw in and ill add a little something from my TA days when i pass it on, due to my dispraxia i draw better than i write so ill add illustrations with some writting, great idea Al with the diary, love the mod knife, is it ok to sand the handles down a little as a bit rough around the edges ? better pics very soon


-
I just want to say big thanks to Al for the chance to try these knives out, ive wanted to try the MOD survival knife out for ages, monday ill take some pics and start my test on these knives, the MOD is a beast of a knife, talk about solid build :o looking forward to the kids going to school monday so i can get these out, oh angie was not here when they came ;) :D
-
@Zed said:
A big thanks to neil, they landed on saturday but been a manic weekend, i love the extra thant neil threw in and ill add a little something from my TA days when i pass it on, due to my dispraxia i draw better than i write so ill add illustrations with some writting, great idea Al with the diary, love the mod knife, is it ok to sand the handles down a little as a bit rough around the edges ? better pics very soon
Paul, get stuck in feller - fill yer boots :D
These knives pretty much leave the factory "semi-finished". The scales are oversize and the final grind is more of a gesture. Neil comparison with "store bought axe" was quite apt - it's down to the user to get the full potential out of these items. You can use them as they are, but you really need to do a little refining yourselves to get the best out of them. Feel free to do what you feel is needed guys. If there's a rough spot - get rid, if it needs a edge/profile tweak - then tweak away.
Obviously we don't want to get to the end of the passaround with the big knife having been reduced to the size of the little one ::) ::) :D the hardness will only be so deep on steel of that thickness - otherwise it'd snap on you in chopping duties - but other than that feel free to do what's needed. Even if someone feels a better sheath is needed for example, feel free to knock one up (just include the original when you pass it on so the next guy can see what comes from the factory)
Other than that, nice to hear your first impressions and look forward to your thoughts and pics as you put them into action

-
@50ft-trad said:
A big thanks to neil, they landed on saturday but been a manic weekend, i love the extra thant neil threw in and ill add a little something from my TA days when i pass it on, due to my dispraxia i draw better than i write so ill add illustrations with some writting, great idea Al with the diary, love the mod knife, is it ok to sand the handles down a little as a bit rough around the edges ? better pics very soon

Paul, get stuck in feller - fill yer boots :D
These knives pretty much leave the factory "semi-finished". The scales are oversize and the final grind is more of a gesture. Neil comparison with "store bought axe" was quite apt - it's down to the user to get the full potential out of these items. You can use them as they are, but you really need to do a little refining yourselves to get the best out of them. Feel free to do what you feel is needed guys. If there's a rough spot - get rid, if it needs a edge/profile tweak - then tweak away.
Obviously we don't want to get to the end of the passaround with the big knife having been reduced to the size of the little one ::) ::) :D the hardness will only be so deep on steel of that thickness - otherwise it'd snap on you in chopping duties - but other than that feel free to do what's needed. Even if someone feels a better sheath is needed for example, feel free to knock one up (just include the original when you pass it on so the next guy can see what comes from the factory)
Other than that, nice to hear your first impressions and look forward to your thoughts and pics as you put them into action

Cheers again Al, im a bit odc and the handles dont fit the tang so ill smooth it down a little,
love the little welds under the guard 8) -
More than welcome feller

As a side note that sheepsfoot knife that's in the pic is almost the same as my first "proper" slippie. Mine has brass bolsters and pins and a carbon steel blade, and it still gets carried and used to this day even after surviving an overnight spell in a submerged shed in the 2007 floods. My Andujar stainless bowie actually fared a lot worse and I ended up replacing it, but a mate of mine managed to ressurect it after I let him take it ... I digress :D :D :D
The slippie was a gift from a mate of mine over 20 years ago who worked in the trade back then - and it was actually a gift to him from the "Little Mester" who worked in Kelham Island Industrial Museum at the time ... though I'm not sure who the resident Little Mester was back then, and the tang stamp doesn't offer any clues

-
Well sadly not much time to fiddle today but i did rub the handles down so now fit :D and added some green paracord as a lanyard, hopefully more time tuesday

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login