The Sideman
-
To just change the blade would you have to disassemble the whole tool or just take off the handle scale on that side?
-
@Tsquare said:
To just change the blade would you have to disassemble the whole tool or just take off the handle scale on that side?You just need to remove 1 screw but it still takes 2 nut drivers and you can change the blade on the outside tools. The outside blade swap was very easy. All in all the entire swap did not take 5 minutes, it took longer to get the tools I needed than to swap the blades.
Bruce
-
Awesome. I may try the mod because I love everything about the wingman except for the combo edge blade.
-
Sharpen the can opener and you can use it for a package opener and get the file back.
-
@darth_guy101 said:
Sharpen the can opener and you can use it for a package opener and get the file back.not bad!

-
Thanks Bruce, my wingman is now perfect(for me anyway). Just so everyone knows one of the other cost cutting measures on this tool is no loctite on the pivot screws. Makes for much easier mods.
-
It was a little easier but I think they might still have loctite, at least mine do now. I don't remember the station for assembling the Sidekick or Wingman not using loctite. All the stations have the loctite dispenser.
Bruce
-
I love the fact that a standard torx 10 fits without having to seek out a tamper proof model.
-
OH I wish leatherman sold parts like SOG does. I picked up my $25 wingman at HD last night. It's actually not too bad for what it is... an entry level tool. But I really really do not like the serrated blade. I wish I could just buy a normal blade from leatherman and swap it out. Seems like a waste to track down a sidekick just to harvest a blade.
-
@Syph007 said:
OH I wish leatherman sold parts like SOG does. I picked up my $25 wingman at HD last night. It's actually not too bad for what it is... an entry level tool. But I really really do not like the serrated blade. I wish I could just buy a normal blade from leatherman and swap it out. Seems like a waste to track down a sidekick just to harvest a blade.I've been considering a SOG specifically for that reason... What really bugs me though is how bloody heavy they are. I prefer lighter weight tools.
-
@Heinz Doofenshmirtz said:
OH I wish leatherman sold parts like SOG does. I picked up my $25 wingman at HD last night. It's actually not too bad for what it is... an entry level tool. But I really really do not like the serrated blade. I wish I could just buy a normal blade from leatherman and swap it out. Seems like a waste to track down a sidekick just to harvest a blade.
I've been considering a SOG specifically for that reason... What really bugs me though is how bloody heavy they are. I prefer lighter weight tools.
I changed the loadout on my powerlock and it was nice to be able to do it without special tools. I wonder if I could get a SOG straight blade to fit on a wingman with some grinding of course... but still. I think they are 8 bucks for a SOG blade on ebay... hmmm.... sogman anyone?
-
Overall, without mod, i thought the wingman was best... BUT I went with the Wingman with the saw and the plain knife. I also touched up the edge on the clamshell opener to increase the odds of cutting myself. Now it rocks as a mod!
-
Ok, the serrated blade is bugging me. I think I will end up grabbing a sidekick just for the blade. Maybe someone else will want to buy a sidekick with serrations, although I would guess most prefer a straight edge. Cheapest place I found one in Canada so far is Amazon.ca 32 bucks. http://www.amazon.ca/Leatherman-Sidekick-Multi-Tool-Standard-Stainless/dp/B005O65226/ref=sr_1_2?ie=UTF8&qid=1320678147&sr=8-2
Guess I'll grab one before they are price jacked up.
-
There's not usually any love for the combo edge. Ideally it's nice to have both but I'm a huge fan of combo edges now. I'd hate to be stuck with just a plain edge, try sawing through a frozen rope with just a plain edge or open a feed bag (burlap sack). I didn't used to like serrated edges at all but once I learned what they're good for I'll never go back. Honestly I hardly ever use the PE on my SURGE.
-
@Beerplumber said:
There's not usually any love for the combo edge. Ideally it's nice to have both but I'm a huge fan of combo edges now. I'd hate to be stuck with just a plain edge, try sawing through a frozen rope with just a plain edge or open a feed bag (burlap sack). I didn't used to like serrated edges at all but once I learned what they're good for I'll never go back. Honestly I hardly ever use the PE on my SURGE.I haven't found a combo edge I like yet. Most of them seem to have the serrations near the handle and that drives me nuts since that's where I use a blade most to carve, that's where the power is, when you do a chest lever cut etc..
I do love having a serrated blade option on my MT though. The rescue cutter on my swisstool RS is amazing. That's how i prefer my serrations, the scalloped shaped. Nothing to snag on, and you basically end up with what 40% more cutting surface in the equivalent length plane edge.
-
I was talking about this with Metropolicity the other day, the spirit does it nicely (the butter knife) with the scalloped serrations and a section of PE near the handle. A reverse CE seems sound in theory. I just don't have the marbles to try and make one.
-
@Beerplumber said:
There's not usually any love for the combo edge. Ideally it's nice to have both but I'm a huge fan of combo edges now. I'd hate to be stuck with just a plain edge, try sawing through a frozen rope with just a plain edge or open a feed bag (burlap sack). I didn't used to like serrated edges at all but once I learned what they're good for I'll never go back. Honestly I hardly ever use the PE on my SURGE.I started out hating serrated blades my self, but after learning how effective they really
are, i love them. And they will let you save your plain edge for finer work. I usually carry a modified Charge TTi, so i got both, but if I were asked to make a lightweight or cost-friendly T, i would go for a combo blade for sure...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login