Ready,Set,Switch! (SwitchPlier)
-
OK, I don't know if its all the hype , but this has become my new favorite tool! when this thread started, I searched hard online for one and actually found one for sale locally for under $50.00 new in the box! :D
its compact , fits in the pocket nicely and I love the fact that I can add tools as needed, like a saw or awl...
wonder why they stopped making them? -
Hmmm, good question nj.

Checking through the archives, it appears that the switchplier patent was applied for by Spencer Frazer in 1996, and the first prototype was shown at the 2000 Shot Show. (a rather typical long lead time for new SOG products it seems) ;) But there isn't anything on when exactly the Switchplier was discontinued, or for what reason. ???
-
@njfist said:
OK, I don't know if its all the hype , but this has become my new favorite tool! when this thread started, I searched hard online for one and actually found one for sale locally for under $50.00 new in the box! :D
its compact , fits in the pocket nicely and I love the fact that I can add tools as needed, like a saw or awl...
wonder why they stopped making them?I think David's latter model SwitchPlier's warning sticker may explain why it may have been discontinued
. Excessive warranty issues

-
A theory that definitely has merit Mat.
After wondering about the Switchplier innards for years, I've finally gotten brave enough to disassemble mine this morning:
As we suspected, the plier mechanism is not exactly what one might call "strong". :-\ The weak link is that small pin protruding from the side of the plier jaw:

The pin is a part of the jaw casting, and it takes the entire force of the handle when you squeeze down. The handle pivots on the center screw (removed in this picture) and the leverage is applied against the cast pin, which forces the plier jaws closed.

I could imagine the little pin being sheared off rather easily. :-\ I wonder if on the later version (with phillips screwdriver) if SOG tried increasing the diameter of the pin to make it stronger?

-
Nice work Bob :o :o
.Great to see the SwitchPlier apart 8) 8).
Thanks Bob

-
-
Nice one Bob
Mechanically the strength of that pin really does not mirror what the tool looks like it should be capable of. That's quite a large lightweight plier
Let's hope that SOG decide to redesign and rerelease this with a littlelot more grunt. Their compond leverage is excellent as Mat just proved in another thread, and I really do like my Japanese made Toolclip. It would be nice to see the same power and strength applied to a switchplier -
Really nice to see these pics
thanks for that. Shame with that cast pin, you'd of thought it to be either both sides or rod type of thing all the way through the plier
Still liking these SwitchPliers, unique design again for SOG and as 50ft-trad says, it would be nice to see these again with a bit more Oomph but until then be gentle 
-
@badwolf said:
Really nice to see these pics
thanks for that. **Shame with that cast pin, you'd of thought it to be either both sides or rod type of thing all the way through the plier **
Still liking these SwitchPliers, unique design again for SOG and as 50ft-trad says, it would be nice to see these again with a bit more Oomph but until then be gentle 
I think that is an excellent suggestion BW.
A steel rod all the way through the plier, engaged by the handle on both sides, would make a world of difference IMO. 
-
Good lands that is a small pin on the plier jaws. :o Weak link indeed. Thanks for showing us the innards Bob.
:) -
-
Great to see the SwitchPlier apart 8) 8).
+1 :o :o
So did you get it back together Bob or are you looking for another..?
:DIt's reassembled, but I must admit it seems a bit 'catchy' for some reason. Or maybe it was always like that?
I'll probably have to take it back apart and see if I did something wrong. ::) -
Really nice to see these pics
thanks for that. **Shame with that cast pin, you'd of thought it to be either both sides or rod type of thing all the way through the plier **
Still liking these SwitchPliers, unique design again for SOG and as 50ft-trad says, it would be nice to see these again with a bit more Oomph but until then be gentle 
I think that is an excellent suggestion BW.
A steel rod all the way through the plier, engaged by the handle on both sides, would make a world of difference IMO. 
Not so sure about that solution ??? since a steel rod all the way through will render the plier head incapable to open

I think a better approach will be a Box Joint type of Plier, like the one in the Schrade ST5E:
As you commented about them in this thread: /post/501064
They could also use laminated steel plate construction which will be cost effective

-
Really nice to see these pics
thanks for that. **Shame with that cast pin, you'd of thought it to be either both sides or rod type of thing all the way through the plier **
Still liking these SwitchPliers, unique design again for SOG and as 50ft-trad says, it would be nice to see these again with a bit more Oomph but until then be gentle 
I think that is an excellent suggestion BW.
A steel rod all the way through the plier, engaged by the handle on both sides, would make a world of difference IMO. 
Not so sure about that solution ??? since a steel rod all the way through will render the plier head incapable to open

DOH!
Yeah, I guess you are right, forget the pin-all-the-way-thru suggestion! :P :D@Ombudsman said:
I think a better approach will be a Box Joint type of Plier, like the one in the Schrade ST5E:As you commented about them in this thread: /post/501064
They could also use laminated steel plate construction which will be cost effective

Excellent solution, I agree completely!
You should go apply for an engineering job at SOG Ombudsman 
-
Heheh thnxs ! :D Let's hope they see this thread and bring back the SwitchPLier !!

-
Just found a Mini Switchplier at ebay ! :o Well .. just a chinese "mini me" of the original, but a cute and inexpensive one indeed :D
Don't know how frail it will be, but for less than 6 bucks it can always make an nice christmas ornament !


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login