BuckTool collectors unite.
-
Arrived today.
-
-
Excellent pics all round
these ooze quality
another MT I've not seen, liking the 355 model
What are the side bits for on the 360 

-
-
Thank you Allan
The 355 model is that non locking then
if so it will have to go on my 'really need it must have at all costs and in place of more important things list' kinda in to my non locking MT's at the mo and being in the UK, just like to carry and use my MT's :D -
@badwolf said:
Thank you Allan
The 355 model is that non locking then
if so it will have to go on my 'really need it must have at all costs and in place of more important things list' kinda in to my non locking MT's at the mo and being in the UK, just like to carry and use my MT's :DThe 355 BuckLite Tool and the 350 MiniBuck Tool are non locking. The 360 BuckTool is the only BuckTool that the implements lock. Other than color variations (350 MiniBuck Tool came in Black Oxide) these tool only came with the implements shown.
355 BuckLite Tool


350 MiniBuck Tool


-
I love the BuckTool, and I would love to see it return- if anyone from Buck is reading this, BRING BACK THE BUCKTOOL, even if it is only a special run or limited release.
What makes the BuckTool special? Simple- it's innovative. When it came out during what I like to think of as the First Golden Age Of Multitools, a period in which everyone recognized the brilliance of the plier based tool Tim Leatherman had released and struggled to make thier own version, everyone was trying to solve the problems defined by the PST. The biggest issue was the exposed sheet metal edges, and the race was on to find a way around that- Schrade rotated the handles 90 degrees, Bear rotated them 180 degrees, SOG rotated the hinges 90 degrees or added awkward flaps and Gerber developed the sliding head plier concept. I think Buck's answer incorporated the best of these ideas by having the handles fold sideways, but opposite to eachother.
Was it another silly gimmick? I say no, because it allowed the convenience of opening the pliers one handed like the butterfly styled PST although without the rough edges. It allowed for a hand friendly ergonomic handle without the added bulk of the ST-1. The plier head wouldn't fold sideways during use like the ParaTool, and it didn't have extra pieces thrown in to try and cover it's own shortcomings like the Powerlock. The mechanism didn't waste as much space as the sliding mechanism on the Multiplier, and as if all that wasn't enough, it incorporated a very smooth, effective non-obtrusive lock mechanism- something that Schrade and Bear didn't manage to do, and most other companies like Leatherman and SOG showed how unimaginative they were by using an existing rocker type lock.
There were some drawbacks though- some of the stubby screwdrivers were a bit of a pain, the three sided phillips was a bit odd and if twisted the right way the plier head would start to fold, but how many of these other companies got it right the first time around?
Given that this design is almost 20 years old, imagine what 20 years of development and inoovation would have brought us today had Buck not killed the line and moved to China? Now with Buck bringing much of their line back in house, I think it's high time we saw an updated, USA made version of the 360.
Def
-
I got an unused 360 recently, and it's certainly an interesting concept. The pliers are mechanically weaker than "conventional" multitools due to the way the heads are affixed to the handles and the orientation of the sheet metal at that point. As for the drivers and 3 winged Phillips, I don't feel they are much worse than a lot of multitools currently available - I'm thinking Gerber's 2.5D Phillips and the stubby drivers on the Juice line.
At this stage I'm undecided whether this tool is one I should put into use, or pass on unused for someone to keep as a safe queen. It's quirky - but I've yet to decide whther it's quirky in the right way or the wrong way for me personally - and for me it's a user or a loser
I'd like to see Buck have another shot at the plier based multitool market and be as innovative as before - although people generally expect a pliers based tool of this size to have heavier duty pliers than Buck offered previously. The X-Tract was another innovative tool which didnt fit my needs - big locking knife (not the best start for us Brits) and (again) lightweight pliers didn't tick my boxes, but it was fun to try out for a while. Alternatively if Victorinox won't bring out a line to rival the Juice, maybe Buck could
At least we know they'd do something different with the challenge and be prepared to start with a blank canvas, and I do respect Buck for that -
Grant you bring up some good points buddy. One thing I
ve noticed and I been guilty of myself at times is that we some times pass judgement about these older tools without considering the times in which they were developed. The BuckTool I got yesterday is a later production one I think and it has a regular Phillips driver not three sided and a lanyard attachment instead of the smaller Phillips driver. Ive should have two more in of eariler production in a day or two so will post some comparision pics later. :) -
Nice score David
They are behind the times and.not my edc but for their time they were innovative. And the quality is great. Very sharp blades -
Thanks Longbow for posting those pics, I'm rather interested in getting a 355, its on the list now. thanks Grant for that interesting read. As I said, these really do ooze quality, I didn't realise how old they wear
would also like to see these remade, very nice MT
50ft-trad if you decide to pass it on please PM as I'd like to see and try one of these even though its a locking one as I too like use or lose 
-
I have discussed the BuckTool with a Buck Knives employee. One of the reasons the BT was discontinued is that Buck had to pay "royalties" on the design of the BT, and it became cost prohibitive to continue producing the BT and stay competitive in the Multitool market. During the time the BT was manufactured the market was being flooded with new Multitools and Buck Knives felt it could no longer compete with other manufacturers. I really doubt Buck would ever do another Multitool run, as I understand it that when Buck Knives run out of warranty parts for the tools that will be the end. I know they have very few parts left for the tools now.
-
Very interesting. :) Any idea who they were paying the royalties too?
-
@Gareth said:
Very interesting. :) Any idea who they were paying the royalties too?Brett P Seber from SeberTech (now IDL Tools) and a bunch of guys according to the patent:
http://www.google.com/patents?id=M-4IAAAAEBAJ&printsec=abstract#v=onepage&q&f=false
-
cheers Ombudsman.

-
Here are a few comparision pics of some differences in the BuckTool. In descending order the first pic shows the plier head differences pointed out by Bob earlier in this thread. From left to right the second pic shows the older plier head is a little beefer looking.
-
The third pic shows the newer BuckTool ( bottom tool ) has a different tool set. The Phillips is four sided not three. The small Phillips is replaced by a lanyard attachment. From right to left the the fourth pic shows the two different sheaths the BuckTool 360 came with.
-
One other thing I noticed about the later produced BuckTool 360 is the handles are stouter and dont flex as much as the earlier examples. At least with the one I have. :)
-
-
One other thing I noticed about the later produced BuckTool 360 is the handles are stouter and dont flex as much as the earlier examples. At least with the one I have. :)
Can you tell what change made them stouter David? (I'm on the road right now and can't look myself)
Bob, I cant really see a change that would make them stouter. Maybe its just the way this one got put together.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login