PST
-
Okay, that first one in the last post is perfect.
What year is your tool?
Can someone with a real new one take the same pic?
The wire cutters on mine are a lot thinner and a different shape - they look a lot less sturdy.
-
My codes are 1200
-
Just a gentle prod for Hawk to take and post some pics for me

-
I will do it in the morning!!!
-
By the way it is a o4/03 That I got from the Land Down Under>
-
What am I? Some young sprout with eyes that work?
I can't see that tiny little pic!
- I'm trying to work out if the cutters have the same look as the first pic in Benner's reply (Reply #119)
(Mine are 1003 - and the cutters look a lot less substantial)
-
Nope they are the same. Unfortunatly the missus dropped the didgi and I am forced to use the phone >:(
But it appears to be the same as Benners.
-
Damnit!
Every one I have seen has been like Benners, yet mine is not.
What gives?
I'll try again to get a photo of it so y'all can see what I'm talking about.
-
I would be interested in seeing it. I was unaware other than the hard wire notch there are any variations.
-
A picture, in lieu of nothing being able to take photos.
Note the thinner cutters overall, and where they would overlap - the top model as "stops" further out from the plier head, but mine has flat all the way.
If I can't get an explanation from here (arguably the best Multitool resource in the world), I might have to take it on my next trip to the Leatherman Aus office.
Another oddity is the "E" in LEATHERMAN on the plier head is cut funny, but that obviously doesn't affect the function of the tool.
-
Nomad
I went back and was looking at all the tools I have and that head loks like the cutters on the sideclip you sent me. Identical in every way.Could it be a sideclip head on a pst?
-
What's the Dates on the Sideclip? (I should know that, since I posted it somewhere before)
I understand the heads on PSTs, Sideclips, and 1998 Waves were all the same? So anyone with an Old Wave could help out here too.
-
Ok there are 4 of them.
12/03
01/04
01/04
02/04 -
I definitely have a PST head, it's not flattened off like the Sideclip ones.
But since I'm not alone it seems that just before they stopped making them, they changed the cutter style.
Conspiracy indeed.
-
@Nomad said:
What's the Dates on the Sideclip? (I should know that, since I posted it somewhere before)I understand the heads on PSTs, Sideclips, and 1998 Waves were all the same? So anyone with an Old Wave could help out here too.
I think:
The Old Wave has always had the same plier head as the Pulse.
The PST has it's own head in comparison to the SideClip. The SideClip head is beveled on one side to provide clearence for the knife blade due to the thinner handes. This is continued in the current line-up with the Kick plier head, it's the new shape but beveled on one side.
Old Wave:
/topic/1534SideClip:
/topic/3562PST:
/post/12162There are, course, incongruities. I think I have seen a pre-2004 Wave with the oval 2004+ head. Or was it a 2004 Wave with the pre-2004 head? And of course, the earliest PSTs had different heads than the later models:
http://www.bladeforums.com/forums/showthread.php?t=531577 -
Also, I have 3 PSTs coming to me of various vintage. I will compare the wirecutters to the picture you have posted.
I guess.
:P
-
Your Marquette Sideclip appears to have the Wider cutters, but in your Wave/Wave head pic - it is hard to tell, but maybe the lower one has the thinner cutters?

Well, we know the thin cutters appear on PST and Sideclip heads - we need to confirm its existance on Pulse/OldWaves.
I'd say it is a newer design, as so far it has only appeared on the "New Style" heads, (Second Generation? Between the old angular ones, and the new-new ellipse ones) with tools from '04.
Hawks PST (with the Wider Cutters) is a LEATHERMAN TOOL one, not a LEATHERMAN USA one - so that's not the deciding factor.
-
Ah!
The lower Wave does have the thinner cutters.
It's a 04 model.
My 01 Pulse has the arrow similar to the Wave but is has the wider edge.
-
So why change them all right before discontinuing?
and for The Big Question -
Is it better or worse?
Mine are, for lack of a better word "Munted" - The sure as heck can't cut paper (Just tried then - had to get to 5 layers before it cut rather than folded it), and when they are closed I can still see light though the Hard Wire notch.
They make a mess of stranded copper wire.However- I've been using them to hack up steel welding rod. I'm a little disappointed that such an act would damage the tool, but not all that offended, as I've had it do worse to cheapie Diagonal Cutters.
-
@Nomad said:
So why change them all right before discontinuing?The thinner style is the same as on the current tools. My Blast, Wave and Kick all have that style.
I assume this was part of their continual updating.
L-R: 2004 Wave, Kick, Blast, 2000 PST.

I think it is as good or better, they all seem to cut Zip-ties, paper and wire the same as I can tell. Might be a durability matter or an ease of production thing.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login