Alox+Hook - is it possible?
-
Haha, nice advert :)
I use the hook for getting tent pegs out of the ground. It really makes it a lot easier, especially if they've been pushed right in with your heel.
Yeah. I did worry that the hook layer was thicker than the saw layer.
How about a scissors+hook layer in 93mm then?
-
From what I was told, no. There are no aplications to the back side of a Alox, now if you put it on top, mmm maybe? But I would think it would drop to low.. JR
-
Back side tools require a 4th pin and alox models only use 3. :-\
-
That's a definitive no then! Thankyou.
That's actually made my life easier - I can narrow my choices down to silver, blue or old-red farmers now :)
-
Ahh of course it can be on an alox. A lot of work. Maybe a scissor mod then add an extra hole to the scales, add hook an there ya go.
edit: this is not a request for mod service. Just it is possible.
-
'How would you build an escalator to the moon?' It's a common interview question to see if you're the type that focuses more on obstacles or solutions. So here we go...
The one thing you have to avoid is those extra 2 pins running through the whole knife requiring you to drill holes through who knows what. That means isolating them to the 1 layer that has the hook in it. You'll have to cut new liners with the 2 holes for the backtool so I'd suggest cutting them from titanium or stainless since aluminum just won't hold up at .030". You know the scissor mod with the gap? Build that layer with the new liners and put the hook in there. Then you can peen the pins into countersunk holes on the outside of those liners and sand them flush. Now you have the extra pins only in that layer which you can add other tool/spring layers to and the whole thing will still go together with the 3 Alox rivets.
-
Brilliant! Great way to think that out. The long nail file is similarly attached to the liners only.

-
That I have to remember. Great thinking. 
-
@bushidomosquito said:
'How would you build an escalator to the moon?' It's a common interview question to see if you're the type that focuses more on obstacles or solutions. So here we go...The one thing you have to avoid is those extra 2 pins running through the whole knife requiring you to drill holes through who knows what. That means isolating them to the 1 layer that has the hook in it. You'll have to cut new liners with the 2 holes for the backtool so I'd suggest cutting them from titanium or stainless since aluminum just won't hold up at .030". You know the scissor mod with the gap? Build that layer with the new liners and put the hook in there. Then you can peen the pins into countersunk holes on the outside of those liners and sand them flush. Now you have the extra pins only in that layer which you can add other tool/spring layers to and the whole thing will still go together with the 3 Alox rivets.
That's what I was referring too. The scissors with gap mod. That does sound like a good way to do it

-
Very interesting!
So, uh, if anyone feels like taking the job on, I have a little stack of cash I'd like converted into a new SAK

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login