Jumper cables?
-
I make mine. Lowes carries the wire then get a few pair of welding clamps then heat, solder, and presto. Super tough.
-
I know the clamps could be better, but this is the pair I purchased:
Supposedly 6 gauge all-copper wire; 16 feet long.
@ Steve: Except for the soldering gun I included with my purchase for my mum for Christmas, I don't have a soldering gun here; I guess that would've been the most economical route. :)
-
Question: Did I come out alright for under $30? :/
-
I'd say so- when you need them they'll be worth a whole heck of a lot more than that!
Def
-
My mother says I have to go round and get her car started. Can I find a set of jumpers? Nope ::)
-
Chuck Norris can jump start a car with one of his nerve endings.
-
No show for Chuck this evening :( Bloody unreliable that bloke ::)
-
Now, get yourself something to put them in so they don't get damaged while riding around in your trunk. Plastic bucket, carrying case ..... something. Then Toss in some gloves, a flashlight and you'll be in good shape should the need arise. Now, this is important. Read the instructions so you know how to properly hook them up and disconnect them.
- red (+) to dead battery
- red (+) to live battery
- black (-) to live battery
- black (-) to dead cars engine block, or bolt or bracket
- Before starting dead car, make sure the cables will not get caught up in the belts, fan or other moving parts.
- Let idling car sit connected to dead car for a couple minutes before trying to start dead car.
- Try starting dead car.
8 After dead car starts, remove cables in reverse order that they were connected in.
But don't trust me, read the instructions.
Mike
-
What do you need cable that thick for, jump a tank? :D
-
@jzmtl said:
What do you need cable that thick for, jump a tank? :DYou can't have jump leads that are too heavy :D
My car's only a 2 litre petrol engine, but I've jump started boats up to 65ft, 3.5 litre diesel engined cars and a 10 tonne diesel forklift with my jump leads

Jump leads are great! Bump starting boats and 10 tonne forklifts isn't easy ;)
-
I've a set of jumper cables which have cost at the time about 25 eur. I think the price is still the same today, give it or take. These have 3 meters long with 16mm² of cable copper section (thats 9,8 feet and somewhere between 5 to 6 gauge).
@Mike said:
Now, get yourself something to put them in so they don't get damaged while riding around in your trunk. Plastic bucket, carrying case ..... something. Then Toss in some gloves, a flashlight and you'll be in good shape should the need arise. Now, this is important. Read the instructions so you know how to properly hook them up and disconnect them.- red (+) to dead battery
- red (+) to live battery
- black (-) to live battery
- black (-) to dead cars engine block, or bolt or bracket
- Before starting dead car, make sure the cables will not get caught up in the belts, fan or other moving parts.
- Let idling car sit connected to dead car for a couple minutes before trying to start dead car.
- Try starting dead car.
8 After dead car starts, remove cables in reverse order that they were connected in.
But don't trust me, read the instructions.
Mike
That's exactly as described in the instructions, I've just checked.
-
@Mike said:
Now, get yourself something to put them in so they don't get damaged while riding around in your trunk. Plastic bucket, carrying case ..... something. Then Toss in some gloves, a flashlight and you'll be in good shape should the need arise. Now, this is important. Read the instructions so you know how to properly hook them up and disconnect them.- red (+) to dead battery
- red (+) to live battery
- black (-) to live battery
- black (-) to dead cars engine block, or bolt or bracket
- Before starting dead car, make sure the cables will not get caught up in the belts, fan or other moving parts.
- Let idling car sit connected to dead car for a couple minutes before trying to start dead car.
- Try starting dead car.
8 After dead car starts, remove cables in reverse order that they were connected in.
But don't trust me, read the instructions.
Mike
That sounds correct; it roughly matches the instructions on the reverse of the box. I'm thinking about getting a bag to put the cables in, but for now, I'm just going to keep them in the box. I went with longer, thicker cables because I've had experience where a ten foot cable wasn't quite long enough; when the battery is on one side of the engine, and the nearest available car can only pull up so far, the extra footage is worth the cost.
As for the gauge of the cable, the research I found suggested getting the thickest gauge, longest all-copper cable jumper cables that doesn't break the bank.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login