AAA Flashlight reco please.
-
IMO, can't go wrong with the Fenix EO1 or EO5. I have the EO1 on my keychain (had it going on 3 years - no problems), and I just bought a EO5 last Tuesday which is currently riding with my LM Surge.
I just wished my Fenix E11 would fit inside the LM holster, but it just has too much girth. -
Got to be the E01 mate :) You simply can't go wrong with one

-
I can also recommend the ITP A3 EOS as a good torch to fit that space.
-
What about the fenix LOD. That comes in a titainum too. There a bit move pricy tho
-
@ketchupgun said:
It doesnt' need to have lots of modes or anything, and I'd prefer something with more flood than throw. Run time is not an issueFenix E05 fits this perfectly. A very floody, tiny, simple AAA light. If runtime isn't an issue then it beats the E01 hands down, imho.
-
I can also recommend the ITP A3 EOS as a good torch to fit that space.
I've got an iTP A3 EOS Stainless Steel ordered. They say "upgraded" model -- don't know really what it means -- and to have Cree XP-E Q5 leds, which for me is also something mysterious.
Upgraded means its the multimode (medium, low, bright) model, as opposed to the single (mid brightness) mode model.
-
Its hard to go wrong with the E01 or E05. I have both & they are great. I read on the other forum that itp has some reliability issues.
-
thx for all the replies!
No love for those leatherman keychain lights?
Is that E05 the same size as a Solitaire?
BTW...where does one buy Fenix lights? I have never seent hem in stores (I'm in Toronto, Canada) or is it all online sales? Where's the best place to get them in Toronto?
-
Welcome.The E01 is about 1/4 inch shorter than the Solitaire and almost the same diameter.I have both the EO1 and the E05 but I like the brighter light output of the E05.These have more flood than throw.I order mine from Amazon.com.I have never seen the Fenix for sale in any store in my area.
-
The Leatherman should be fine as well..! There are so many AAA lights out there its hard to keep up. I just don't know how you can stand the Solitaire as its beam is pretty anemic IMO. When I got my E01 I put the Solitaire in a drawer & have not used it since! The E01 is about 1/4 inch shorter but, fatter around than the Solitaire. I hope this helps you decide. Leatherman has great customer service & stands behind their products.
-
@ketchupgun said:
thx for all the replies!No love for those leatherman keychain lights?
Is that E05 the same size as a Solitaire?
BTW...where does one buy Fenix lights? I have never seent hem in stores (I'm in Toronto, Canada) or is it all online sales? Where's the best place to get them in Toronto?
The Leatherman Serac flashlights were made by Fenix, you can even interchange the heads and bodies of Serac S1 and the E01. Any Serac will be a good addition. As for where to buy E01s
I believe this will be the fastest for you to get one https://www.fenix-store.com/advanced_search_result.php?keywords=e01&x=0&y=0
You can get them cheaper from http://lightake.com/Search.do/Search.e01 with the SNAPSHOT coupon code but it will take a few weeks to get to you.
Amazon has them as well but they charge you for shipping so it's more expensive in the end.
-
All good suggestions IMO. My personal choices of AAA lights are my Fenix E05, Fenix LD01 or my Leatherman Monarch 300. Of these the E05 probably fits your requirements best.
The E05 is just a little fatter and quite a lot shorter than the Solitaire.Another one that I don't own but might suit you would be the Streamlight MicroStream, lots of happy owners out there I believe. http://www.streamlight.com/product/product.aspx?pid=144
-
I agree with all the recommendations as far as reliable, AAA sized lights go. Although I honestly don't think any of them will do a great job doing lighting work, assuming you meant as part of your wedding photography.
Quick run down of the ones mentioned that I know stuff about:
Fenix E01: Great runtime, especially using Energizer lithiums (~13hr of 10 lumen high followed by 10-20hrs of ~1lumen low). Single mode, basically bomb proof. You'd really have to work at it to break one of these. Good value, pricewise.
Fenix E05: Really nice, all flood beam. Single mode, 30 lumens. I think the runtime on energizer lithiums is about 4hrs. Not as bomb-proof as the E01, but still a good value. Kind of short to me, makes it harder to operate one-handed, if that is important to you.
Fenix LD01 (or older L0D): 3 modes. Most recent version mode sequence id med (~30lumens)-low(~3lumens)-high (~70 lumens). Good build quality. New versions are current regulated, so there is no pulse width modulation (PWM) used to make the low modes.* I have the stainless version, which is my current EDC. This is a little more expensive than some other similar 3 mode lights.
ITP A3: Very well priced 3 mode light. IMO, the quality isn't quite at the level of the Fenix LD01, but it is half the price. Uses PWM, but the newest models use a high enough frequency it shouldn't be noticeable. Highly regarded for its price/value. Newest models are L-M-H mode sequence.
Olight i3: Olight (the maker of ITP) is discontinuing the ITP line and has now issued a revised version of the ITP A3 called the i3. Same modes as latest A3 version. Different clip and keychain attachment. Still well priced for the features.
Streamlight microstream: Good build quality (I think the lens is plastic, though). Single mode. I think it is about 30 lumens (but will appear brighter than a light like the E05 because it uses a reflector to focus the beam). Runtime is short for the output, IMO. Only light mentioned that has a clicky tail switch.
Hopefully this helps. If any of what I said is incorrect, let me know.
*PWM basically turns the light on and off at a really high frequency to make the medium and low modes. If a slower frequency is used, it can result in a strobe effect when moving the light. The newest iTP and Olights use a very high frequency that should be undetectable by your eyes. The newest Fenix's use current regulation, not PWM.
-
@gustophersmob said:
Streamlight microstream: Good build quality (I think the lens is plastic, though). Single mode. I think it is about 30 lumens (but will appear brighter than a light like the E05 because it uses a reflector to focus the beam). Runtime is short for the output, IMO. Only light mentioned that has a clicky tail switch.Hopefully this helps. If any of what I said is incorrect, let me know.
Leatherman Serac S1 the OP asked about also has a clicky switch. (I'd like to get the body of the S1 to use it with my whitest E01 head, an E01 clicky
) -
Streamlight microstream: Good build quality (I think the lens is plastic, though). Single mode. I think it is about 30 lumens (but will appear brighter than a light like the E05 because it uses a reflector to focus the beam). Runtime is short for the output, IMO. Only light mentioned that has a clicky tail switch.
Hopefully this helps. If any of what I said is incorrect, let me know.
Leatherman Serac S1 the OP asked about also has a clicky switch. (I'd like to get the body of the S1 to use it with my whitest E01 head, an E01 clicky
)yeah, the serac S1 always struck me pretty much that, but the cost was so much higher I don't think it ever really took off with the flashlight fans. Mating one with a really good E01 head would be excellent.
IIRC you can make yourself a a clicky L0D by putting together a L0D head and a MicroStream body. I always fancied trying that one.
Oh yeah, the Leatherman Monarch 300 I mentioned also has a tail switch, it has however a very tight spot and isn't much of a flood light. Still a very good light thought IMO.

-
Streamlight microstream: Good build quality (I think the lens is plastic, though). Single mode. I think it is about 30 lumens (but will appear brighter than a light like the E05 because it uses a reflector to focus the beam). Runtime is short for the output, IMO. Only light mentioned that has a clicky tail switch.
Hopefully this helps. If any of what I said is incorrect, let me know.
Leatherman Serac S1 the OP asked about also has a clicky switch. (I'd like to get the body of the S1 to use it with my whitest E01 head, an E01 clicky
)Ah, thanks for the clarification, I wasn't familiar with the Serac. It does look to be a very neat light!
Streamlight microstream: Good build quality (I think the lens is plastic, though). Single mode. I think it is about 30 lumens (but will appear brighter than a light like the E05 because it uses a reflector to focus the beam). Runtime is short for the output, IMO. Only light mentioned that has a clicky tail switch.
Hopefully this helps. If any of what I said is incorrect, let me know.
Leatherman Serac S1 the OP asked about also has a clicky switch. (I'd like to get the body of the S1 to use it with my whitest E01 head, an E01 clicky
)yeah, the serac S1 always struck me pretty much that, but the cost was so much higher I don't think it ever really took off with the flashlight fans. Mating one with a really good E01 head would be excellent.
IIRC you can make yourself a a clicky L0D by putting together a L0D head and a MicroStream body. I always fancied trying that one.
Oh yeah, the Leatherman Monarch 300 I mentioned also has a tail switch, it has however a very tight spot and isn't much of a flood light. Still a very good light thought IMO.

Thanks for the info about the Monarch. I'm not familiar with that light either.
The L0D on the streamlight body does look like a handy combination. I wonder if it works witht the newer LD01?

-
I read somewhere that fenix have changed the threads from square to trapezoid, so the interchangeability of heads between newer and older models is less assured. Worth checking up on if that's important for you.
-
@user24 said:
I read somewhere that fenix have changed the threads from square to trapezoid, so the interchangeability of heads between newer and older models is less assured. Worth checking up on if that's important for you.well here is the original thread from CPF and it seems folks have been using LD01 heads successfully.

http://www.candlepowerforums.com/vb/showthread.php?179101-LOD-CE-head-fits-new-Steamlight-Microsteam-body-%28tactical-switch%29/page6
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login