Blade sharpening?
-
In all the years I have been using MTs', once I have worn a blade edge, I have never been able to get it back to "out of the box sharp". Have tried using flat stones, bought a lansky sharpener, works well, but I have not been able to replicate the factory edge with it. Currently use those cheap 3.99$ yellow ones you see in buckets at the checkout line, with the carbide and ceramic side(think the manufacturer is "Smith's"). The cheap one actually does as good of a job as anything else i have used, but they wear out rather quickly.
So anyway, what works for you? -
Spyderco Sharpmaker does the job for me. 👍
-
@Dr. Bahn said:
Spyderco Sharpmaker does the job for me. 👍+1 ;)
Just very easy and quick to use . Although its not ideal for very blunt blades or re-profiling. I am lucky in the fact that I can also sharpen free hand on a stone .
-
I really need to learn the dark art of sharpening.
-
I can get decent results (Slicing paper/shaving hair) with the Lansky (Deluxe, standard stones), though you have to be careful to remove the Burr from the edges to get good results. I also use a home made strop afterwards.
For multitools usually I get better results Free Hand, since they are not easy to work on with the Lansky.
I see that the people getting really impressive, better than "out of the box", results tend to spend a lot of time on each knife (more than 5- 10 minutes) whereas I do not really have the patience to spend a few hours to achieve a super sharp edge that will not really improve my cutting, especially after the first few cuts.
Usually, most of my sharpening is done on Kitchen Knives and a few Swiss Army knives. There are also some knives that can not take a decent edge, irrespective of how I try. One of my kitchen knives is like that. -
I've found that it's much easier to do a light touch up more frequently than to sharpen something really blunt. I use a Sharpmaker, and a few strokes on the ceramic rods will usually bring a blade back to shaving.
-
@django.cj said:
I've found that it's much easier to do a light touch up more frequently than to sharpen something really blunt. I use a Sharpmaker, and a few strokes on the ceramic rods will usually bring a blade back to shaving.Yes!... A knifemaker once told me that the best way to sharpen a knife is to never let it get dull. A few proper swipes on ceramic rods every few uses of the knife and you'll never have a dull knife again.
-
I take the time to get a good edge on the blade to start with, then it is easy to maintain. I always sharpen brand new blades right out of the box then I know my angle is on there and future touch ups are easy.
I use a Buck Tri Stone (Diamond and Stone combo) then go to the SpyderCo SharpMaker to maintain. -
I posted this in another thread :)
I have one of these and it works well for me

(It takes all the skill out of the job but means you get the same angle every time) -
sharpmaker for maintaining an edge.
don't let it get dull -
I'm always changing my sharpening preferences.
As of late it's been pocket diamond stones. I use the factory edge until I notice that it is getting dull, and then I touch it up on a stone. Diamonds are great, they quickly sharpen the hardest of steels, and the tactile feedback it excellent. You can really "feel" when the sharpening is done.
-
@Accujohn said:
Yes!... A knifemaker once told me that the best way to sharpen a knife is to never let it get dull. A few proper swipes on ceramic rods every few uses of the knife and you'll never have a dull knife again.+1. I give my pocket and kitchen knives a few FEATHER LIGHT passes with a ceramic V rod sharpener after every other uses or so. Doing that has kept my kitchen knives razor sharp for the past two years. But if a knife gets dull, I'll take it to a professional and get it sharpened. Some folks can whip out the sharpener stones or sharpmakers and get a dull knives razor sharp. I'm not one of those.
I'm also looking at getting an electric knife sharpener recommended by Cooks Illustrated and trying that out on a few old dull knives to see if it really works.
-
For the most part, I sharpen using two different stones, one one coarse/medium, one fine/very fine. I also have one of the yellow Smiths sharpeners mentioned in the first post. I keep it in my locker at work, and it does a decent job. I'm thinking about getting either a Sharpmaker or a Lansky soon though.
-
S_P_Y_D_E_R_C_O
T_R_I_A_N_G_L_E
S_H_A_R_P_M_A_K_E_R

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login