Leatherman SIDEKICK / WINGMAN Owners Club
-
Glad you like the lanyards I dabble a little with the old para cord stuff still experimenting a lot with different designs on the lanyards those on the Wingman and Sidekick were prototypes and they turned out pretty cool even if I do say so myself.
I like to challenge myself when it come to lanyard making they were an idea I had for a while and they finally turned out just right.
I will keep playing with the para cord and experimenting too.
-
Just for interest I hardness tested the main blade on my Sidekick - 58HRC. I also tested the main blade on my 1991 PST (back in 91) - 59HRC. Virtually the same. Not bad for an entry level tool.
-
thats cool. how do you perform a hardness test??
-
Here is the link for the modified sidekick video.
-
I think it would have been better if the modder left the clip on the plier side of the tool. It makes it less likely to open in the pocket.
-
@Potassium Hydroxide said:
I think it would have been better if the modder left the clip on the plier side of the tool. It makes it less likely to open in the pocket.One decent thing about the Sidekick/Wingman mt's are when you close the tool, it stays closed very well. It's almost like a spring is working against it when you start to open it.
When it's closed, if you open it up a little bit and let it go, the handles will snap back together really fast....... very similar to how the little Micra works when closed :) -
I wonder why they left the lanyard ring off the wingman , why just put a washer in its place ?
-
got both today, really impressed!
going to try the wingman at work this week. i also think i will swap the blades over to give plain edge on the wingman.

-
hey guys, long time reader first time poster
just received the sidekick today, so far i'm impressed with the quality, I guess now I pretty much have to get wingman. -
@pointsky said:
hey guys, long time reader first time poster
just received the sidekick today, so far i'm impressed with the quality, I guess now I pretty much have to get wingman.Yes, that's only natural. Of course, you'll have to get a Wave after that, and a Charge... and a Skeletool for the "lighter" days... oh and a Juice or two, and another couple of Squirts... oh and don't forget to pick up a Fuse and a Mut...
... see ya when your credit card is maxed out... :D
Welcome aboard mate.

-
I looked for a Wingman at HD but found that they were all gone. Ended up paying $30.00 for one at A. G. Russel's. I had a Skeletool that I lost so the Wingman is my replacement. I think that the Wingman is much more tool for the money. I like the lighter weight of the Skeletool but the Wingman has better pliers and feels better in your hands when you are using the pliers. My only complaint other than the weight is the big flat screwdriver. It is too thick and wide for most screws that I will want it for. This morning I took it out and reground it to a more reasonable size. Tool seems almost perfect now!
-
I picked up a Wingman at the local HD today. They had about 14 left. Very nice tool for the $$. Wondering why the phillips head screwdriver is flat on one side. I would have preferred something closer to what's offered in the Juice lineup. I really did the pocket clip.
-
The phillips head on mine is the same on both sides. A lot like the phillips head bit on a skeletool. I seems to work real well.
-
hay guys just wanted to ask a quick question. i got the wingman for my brother in law for xmas. hes really happy with it as its his first quality multi tool. i had a look at it, as any multi tool nut that dont own one would do. and noticed that the pocket clip has alot of movement, and rattles about. he dont seem bothered by it but it would bug the c*ap out of me. should i just tighten it up or will that tighten other tools up also?
is this common with the wingman and sidekick?
cheers
-
The pocket clip on my Wingman also moves about. I believe others have mentioned it, and I also seem to remember reading that just tightening the bolt does not eliminate the problem.
-
That's interesting. I suppose that's the down side of getting a budget tool.
After a closer inspection it looks like it would be possible too bend the part of the clip that goes inside the tool, in a way that pulls it down and limits its movement. I can't fink of a better way to explain it. Does anyone understand what I mean ? -
i just tightened mine and it was fine.
you could take the clip off and bend it inward if it was bent.
-
Been a Wingman owner for about a month and I must say I am impressed. I am use to lugging around an ST 300 and this is quite nice. Had my first build with it the other day.

It a "rattlesnake" for an envelope my wife wanted one for her friends Cmas gift.
I am here: http://maps.google.com/maps?ll=39.825120,-85.834989
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
