BuckTool collectors unite.
-
@THE_LONGBOW said:
Yes the camo 360 went high especially since it did not look in very good condition. They seem to sell high around the holidays more competition.. So far I have came up with 8 different standard factory models, with 3 Special production or Prototype.
ThanksCan you share your list with us Longbow? :)
-
-
It appears some of the eariler Bucktool knife blades had no nail nicks.
-
Well this my list and accuracy is questionable.
360 BuckTool no nail nicks (no holes to open blades) first year production.
360 BuckTool with nail nicks
360CM Camo handle
360BKB Black Oxide coating
360FL File with 1 wire stripper notch
360 file with 5 wire stripper notches
360CL pocket clip
360WM Workman with lanyard loop
360 Harley Davidson Etch with bit setSpecial Projects
360 Titainium Nitride (gold) coating
360 BCCI First Run Serialized
360 "Buck" Etch Logo only 2 Prototype madeOther BuckTool
355 BuckLite Tool
355 BuckLite Tool with advertising etch350 Mini BuckTool
350 Mini BuckTool Black oxide coatingIf any one would like to see a picture of one of these let me know. Any additional info would be appreciated!
-
360 BuckTool with "Buck" Etch
This was a factory experiment done as a cover up. How ever as you can see it did not work.

-
@THE_LONGBOW said:
360 BuckTool with "Buck" Etch
This was a factory experiment done as a cover up. How ever as you can see it did not work.

Interesting variation - I've never seen that one before.
What exactly were they trying to cover up? -
Thank you LB! I
d like to see a pic of the 360 Workman. Im wondering if the 360 I`ve got with a lanyard, awl and 4 sided Phillips is a Workman? -
Unfortunately I was told they were not sure of why these two were done like this.
-
@David said:
Thank you LB! Id like to see a pic of the 360 Workman. Im wondering if the 360 I`ve got with a lanyard, awl and 4 sided Phillips is a Workman?I see a typo in my list :-[
The 360WM Workman is the file with 5 wire strippers
360WM file replaces drop point blade, Awl replaces can/bottle opener360 with lanyard is The "Standard 360" from the year 2000.
The 360 with lanyard has a Serrated Sheepsfoot blade a can opener and a Phillips screw driver. -
@THE_LONGBOW said:
Well this my list and accuracy is questionable.360 BuckTool no nail nicks (no holes to open blades) first year production.
360 BuckTool with nail nicks
360CM Camo handle
360BKB Black Oxide coating
360FL File with 1 wire stripper notch
360WM Workman file with 5 wire stripper notches
360CL pocket clip
360 with lanyard loop
360 Harley Davidson Etch with bit setSpecial Projects
360 Titainium Nitride (gold) coating
360 BCCI First Run Serialized
360 "Buck" Etch Logo only 2 Prototype madeOther BuckTool
355 BuckLite Tool
355 BuckLite Tool with advertising etch350 Mini BuckTool
350 Mini BuckTool Black oxide coatingIf any one would like to see a picture of one of these let me know. Any additional info would be appreciated!
I had to change the 360WM and the 360 Lanyard as they were posted wrong in the first list.
-
Thank you for your information LB it is greatly appreciated!
:) -
Here's another one for your list LB: :)



It's a First Production Run BuckLite tool, serial number 078 of 300. (sorry for the poor photos) The engraving is rather small, and doesn't show very well through the blister package. :-\
-
Very NICE J-sews I have not see one of the First Production Run BuckLites. I do have a BuckLite in the Clam Pack but it is not a First Run. So I guess this starts another quest. Thanks for the pictures and info. I will add it to the List.
-
I'll let you know if I see another LB

Hmmm, I wonder if they did a first production run MiniBuck?

-
That`s a 8) one Bob!
:) -
Well I finally got lucky "Thanks to David" ;) I changed my search and found a Harley Davidson BuckTool.





-
I found this story in an old BCCI Newsletter. I found it interesting.
Quoted from BCCI NewsLetter May 1998"Special Projects
Top Brands BuckTool and BuckLite Tool - No Logo
The drop point side of the handle will not have the Buck logo.
Top Brands does premium products in which they apply other
companies logo's to our products. There is no way to know who
will be ordering from Top Brands so just keep your eyes open
and if you see a BuckTool with another company's logo on the
one side, you will now know why. Approximate quantities will
be 3500 BuckLite tools and 4000 BuckTools".No more information in any newsletters as to other names etched on BuckTools that Top Brand did so be on the LOOK OUT for these.
I did find on a list where there may be some (about 50) BuckTools done for the NRA (National Rifle Association) these were etched/pad stamped by Buck Knives.
I also found a run of 2250/360's and 500/355's done for DU (Ducks Unlimited) by Buck.
The information indicates that Buck etched/pad stamped some tools on the "knife blade" and some on the "handle". If you find or have one of these let me know and I will try to find a quantity and year they were made.As I find more special BuckTool projects I will post the information.
-
:o That is a nice HD BT LB. Glad you finally got one.
Thanks for the info on the Special Projects. I sure would like to find a NRA 360. I`ve got a NRA-ILA 350. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login