Ultimate essentials SAK mod idea
-
Sounds like a worthwhile mod there sir. Wish I had the time/skills to help you with it. You should definitely send a PM off to Neil, so you can be near the head of the line when he gets back into mod mode.

In the mean time, have you thought up an official "name" for this tool yet? :)
-
@J-sews said:
Sounds like a worthwhile mod there sir. Wish I had the time/skills to help you with it. You should definitely send a PM off to Neil, so you can be near the head of the line when he gets back into mod mode.
In the mean time, have you thought up an official "name" for this tool yet? :)
I second the creation of a name :)
What about the Ultimate Gripper. There is a hot dog place here in town that has an Ultimate Gripper, but for a whole other reason (think chest gripping :) )
-
That's going to cost a bit. You may want to ask how many springs or donor alox knives you will need for that. That or either go with some custom micarta or g10 scales to keep the cost a bit lower.
-
Steve, is the cost because of the black alox scales I mentioned? Ideally I want HA scales, so in a way it doesn't matter what the starting colour is, but I'm guessing those are even more expensive and hard to get.
Bob, that is a good idea to send a message to Neil, I will get right on that. The cybertool should definitely have arrived by early in the new year, and that has all the tools I want on it, so can ship that off to him if he agrees.
Now in terms of a name... thank you for the suggestion Metropolicity, but given the small hardcore tweezer nature of the SAK pliers, 'Ultimate Gripper' would be a parody of a name :D
I suppose I would have to think about why I am making the mod, and that is the essential nature of these tools compared to the rest found on a SAK or multitool, in my experience anyway, and the desire for a minimalist tool.
So something including one or more of the following, or something similar:
Urban
Minimalist
Essentials
City
Bare Necessities (I have watched the Disney Jungle Book recently)No specific name coming to mind yet will think about it more.
-
CyberTool 4 ?
-
That would not be unique enough Abdul Azeez.
Looking at current and old list of victorinox and wenger names, they are all one or two words.
So how about the more serious ***'The Minimalist' ** * or the more tongue in cheek ***'Bare Necessities' ** *
-
@Raukodur said:
That would not be unique enough Abdul Azeez.Looking at current and old list of victorinox and wenger names, they are all one or two words.
So how about the more serious ***'The Minimalist' ** * or the more tongue in cheek ***'Bare Necessities' ** *
How did you knew my real name :o
Where are you from ??
I know that you live in UK , but what is your Original country ?It looks like you are Arabic or Bakistani ??

-
I was born in the UK, but my father is from the part of the Indian sub-continant now called Pakistan.
The pic in my profile is my son, but he is a lot older now, just over 2 years. And VERY interested in tools and drills and hammers. Takes after his grandfather!
Anyway, I don't want to derail my own thread :D
Any other thoughts on the name 'Bare Necessities' for this SAK mod suggestion? Name is beginning to grow on me.
-
@Raukodur said:
I was born in the UK, but my father is from the part of the Indian sub-continant now called Pakistan.The pic in my profile is my son, but he is a lot older now, just over 2 years. And VERY interested in tools and drills and hammers. Takes after his grandfather!
Anyway, I don't want to derail my own thread :D
Any other thoughts on the name 'Bare Necessities' for this SAK mod suggestion? Name is beginning to grow on me.
What does (Bare Necessities) means
???BTW are you Muslim ?
If you don't want to answer , then dont do that -
The answer to the latter question is 'yes', in fact the meaning of my name is the same as the meaning of yours.
With regards to what bare necessities means, I recommend watching the disney cartoon of the Jungle Book, and even if you have/haven't to watch this youtube clip of a song in it:
Of course, a cleaver play on words is being used by Baloo the bear there, i.e. the 'bear' necessities rather than 'bare' necessities.
'Bare necessities' means the absolute minimum that is necessary. Which is the logic behind my thoughts on this mod.
-
@Raukodur said:
The answer to the latter question is 'yes', in fact the meaning of my name is the same as the meaning of yours.With regards to what bare necessities means, I recommend watching the disney cartoon of the Jungle Book, and even if you have/haven't to watch this youtube clip of a song in it:
Of course, a cleaver play on words is being used by Baloo the bear there, i.e. the 'bear' necessities rather than 'bare' necessities.
'Bare necessities' means the absolute minimum that is necessary. Which is the logic behind my thoughts on this mod.
You mean minimalist ?
-
@Raukodur said:
Steve, is the cost because of the black alox scales I mentioned? Ideally I want HA scales, so in a way it doesn't matter what the starting colour is, but I'm guessing those are even more expensive and hard to get.Bob, that is a good idea to send a message to Neil, I will get right on that. The cybertool should definitely have arrived by early in the new year, and that has all the tools I want on it, so can ship that off to him if he agrees.
Now in terms of a name... thank you for the suggestion Metropolicity, but given the small hardcore tweezer nature of the SAK pliers, 'Ultimate Gripper' would be a parody of a name :D
I suppose I would have to think about why I am making the mod, and that is the essential nature of these tools compared to the rest found on a SAK or multitool, in my experience anyway, and the desire for a minimalist tool.
So something including one or more of the following, or something similar:
Urban
Minimalist
Essentials
City
Bare Necessities (I have watched the Disney Jungle Book recently)No specific name coming to mind yet will think about it more.
HA Scales are very hard to find but you may be able to get someone to make them that way. Most of the cost I mentioned above is due to the fact of how many alox knives you will have to buy to get all the parts.
-
Maybe I am missing something basic here
.Why would I need to get the implements from alox scaled SAKs? Are they build differently from non-alox SAKs? The cybertool 34 I bought has all the implements I want on it, would it be possible to use those with alox scales?
-
The cybertool is 91mm and alox are 93mm. And yes that's makes a big difference. That's why you need the alox, for the scales and springs.
-
Ah, that clarifies things, thank you so much. Something basic like this I was totally ignorant of.
So my plan is not going to work with the cybertool 34 I bought if I am set on alox scales.
What's the alternative, is there any cybertool bit driver which fits the alox scales?
-
Well I know all the tools you listed will work with the exception of the bit driver. I haven't worked with that one so maybe Neil can chime in on that.
-
if the bit driver cannot work, that would rule alox out, correct?
Any other sort of metal, or similarly 'non-plastic' or decorative materal (e.g. bone, horn) tough materials used for scales?
-
Wood,micarta, g10,bone,ivory, just about anything you can think of could be made into scales.
-
Guess I'm going to have to wait for Neil to get in touch before I can move further with this :-\
Thanks for all the info guys.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
