The sub-$20 Infinitely variable flashlight
-
Ah, I think I've got it now. TBH, for the moment at least, I'm going to leave it in the head. I'm probably just being lazy. :D
-
A bit of a necro but I just brainstormed. :D
I just had an idea. I tried different things over time to diminish the wear of the QTC in this flashlight. Nothing really worked. Now I remembered the AAA to AA battery adapter. I put the QTC between the positive end of the AAA battery and the adapter and closed it. The adapters' pressure keeps the QTC in place but as the positive end of the adapter has a bit of wiggle room it's perfect for compressing the QTC. You loose a bit of runtime compared to the AA but save on QTC.
It goes so low the camera won't pick it up.
-
I like it.
Where do you get one of those adaptors? -
@Gareth said:
I like it. :tu: Where do you get one of those adaptors?Electronics stores
or
or
http://www.dealextreme.com/p/translucent-aaa-to-aa-type-battery-converter-cases-4-case-54457
or
-
Is there a reason QTC wouldn't work in a larger torch? a current issue perhaps?
I ask because i am considering making a torch designed from scratch and an infinitely variable output without using conventional electronics would be a real advantage.I was planning on using a head like the malkoff which doesn't have multiple levels so would seem to be suitable for this feature.
With a new design of torch some beneficial features can be added like isolating the QTC pill between two plates in a sealed unit removing the rotation and/or uneven force which can damage the pills. This would also allow multiple pills to be used so the correct resistance in the system could be fettled to an appropriate level.
Any of this stuff still floating around? i've looked but no luck so far, even maplins is out.
(just finished reading around and one site said that a single pill can pass up to 10A when squeezed which is over 10 times the current draw of the malkoff run off 6v so there shouldn't be a current problem at least.
-
@Tofty said:
Is there a reason QTC wouldn't work in a larger torch? a current issue perhaps?Nope, QTC can pass a substantial amount of current. You can also use multiple pills in a single light if you want.
It's more a matter of finding a way to adequately control the compression of the material. The E07 is by far the best light I've found to do it with. -
i may well have to get one and see it in action
-
Just bought a tank007 e07 along with some QTC pills from a teaching suppliers (mindsetsonline.co.uk) so i can join in the fun but i had a thought which might mean i can't use the QTC in the torch i plan to make....
On the Oveready site it says that the Malkoff M61 insert is regulated to give full output until the batteries (2xCR123) are fully drained. Does this mean that when decreasing pressure of the pill, the units regulator will stop the QTC from allowing infinitely variable light levels and just be fully on then suddenly drop to a much lower level suddenly instead of being a linear decrease?
-
One thing to keep in mind is that QTC only works in battery crushers, flashlights without a spring. QTC lets more current through as it is being pressed together and with springs there isn't any additional pressure to the QTC as it is all absorbed by the spring. There aren't a lot of single mode battery crushers out there and the new Peaks already come with QTC installed.
-
i was planning on isolating the springs both from the head and mcclicky switch with brass and plastic plates that thread down onto the springs leaving the compression of the batteries against the QTC to be achieved by a very shallow threaded twisty bottom section.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login