Gerber Flik
-
- How comfortable are those handles for plier use? There doesn't seem to be any smoothness to them under heavy pressure.
- Most Gerbers seem to have that matt finish rather than polished look. It gives me the impression that the stainless is on the soft side, or at least softer than SOG or SAK. Is that true?
- Now granted, we weren't able to give the Flik a full workout, but the handle comfort didn't seem bad at all. I think that hand discomfort only becomes an issue when there is a minimum of surface on which to distribute the hand's squeezing pressure. Worst cases were the old Leathermans and SOG's, where the entire force of the grip had to be borne by two thin edges of the handle channel.
On the Flik, there is indeed a variety of surfaces on the backside of the handles, but they are all similar enough in height that the flesh of your hand is distributed evenly, spreading out the load, reducing the "cut in" effect.
- The matte finish doesn't indicate the softness or hardness of the steel, its simply a matter of economics. After the handle metal is stamped out of a big sheet and formed into shape, it needs to be "finished" to remove burrs and tooling marks. Cheapest and easiest way to finish is by bead blasting (like a sand blaster, only they use tiny glass beads) This gives the tool its matte finish look.
Far better in my opinion would be to brush finish the tool, like many Leatherman tools you see. This offers better corrosion protection, but costs more to do obviously.
Best finish of all is a high lustre polish. (think Victorinox or SOG here) This process is most expensive because it involves a fair amount of manual labor, but it offers the best corrosion resistance.
Sorry to ramble on. Hope that helps! :)
-
Looks like a fantastic tool. Did they give and appearence date? and a MSRP?
-
I'm surprised none of the multitool booths have an "obstacle course" type thing set up on a table where you could use one of their new tools to clamp down on a bolt or use it to turn a screw, etc..
-
@Corrugated said:
I'm surprised none of the multitool booths have an "obstacle course" type thing set up on a table where you could use one of their new tools to clamp down on a bolt or use it to turn a screw, etc..I have long thought of constructing such a set-up but I fear the repercussions to my personal life. Seriously, I have drawings and plans.
I really need to get back into school and get a real job.
But, it would be so cheap and easy to make and so useful!
-
I'm surprised none of the multitool booths have an "obstacle course" type thing set up on a table where you could use one of their new tools to clamp down on a bolt or use it to turn a screw, etc..
I have long thought of constructing such a set-up but I fear the repercussions to my personal life. Seriously, I have drawings and plans.
I really need to get back into school and get a real job.
But, it would be so cheap and easy to make and so useful!
No way...I sketched out a few such things...and quickly crumpled them up so no one would think I'm nuts. I thought of a little clamp system to hold a dowel in order to test out various saws and files.
But I'm just a user with a handful of tools..Leatherman and the other companies should have designed some flashy setup where people could USE their tools. I'm sure SOG has a few bucks to set up something to gauge how much pressure their compound leverage generates.
-
@hawkchucker said:
Looks like a fantastic tool. Did they give and appearence date? and a MSRP?Looking through my notes here, I don't have a MSRP. As regards delivery, we were told that the Flik would be shipping to dealers by the end of this month.
-
great info men! keep it coming. thanks
-
-
Does the Freehand have any significant advantage over the Flik in terms of the individual implements? Selection, size, etc.)? For example, the drivers on both are probably short so thats no advantage there.
-
Are the following "new" features you previously mentioned in the Flik also in the Freehand?
(a) Slide-the-lock-forward-to raise the tools feature
(b) antipinch feature which comes into play after you separate the handles
(c) anti-rattle plier head
-
-
-
Does the Freehand have any significant advantage over the Flik in terms of the individual implements? Selection, size, etc.)? For example, the drivers on both are probably short so thats no advantage there.
-
Are the following "new" features you previously mentioned in the Flik also in the Freehand?
(a) Slide-the-lock-forward-to raise the tools feature
(b) antipinch feature which comes into play after you separate the handles
(c) anti-rattle plier head
Other then length of the knife blades I don't think the Freehand has any implements advantages. It has a few disadvantages being that is has no saw and the smaller implements are attached to a much larger tool.
On my models of the Freehand they were. The Diesel also has the anti-pinch feature.
-
-
I love the thing! I really think that it is a well designed tool and that even though the drivers seem too small I will certainly have to order one!
-
Spoonrobot, thanks for your input. The Flik is looking better and better!
-
- Does the Freehand have any significant advantage over the Flik in terms of the individual implements? Selection, size, etc.)? For example, the drivers on both are probably short so thats no advantage there.
I agree with Spoonrobot, the Flik has the better set of tools. Best example is the Flik's saw blade, which will be far more useful than the Freehand's big-piece-of-metal-with-ruler-markings blade. ::)

-
Does that ruler have an edge at least? Those are nice big scissors.
-
-
You're right - I just saw one today at sport chalet. what were they thinking?
-
It looks like a solid beastie.
Think it could take on a Wave and come out on top?
-
-
Does the Freehand have any significant advantage over the Flik in terms of the individual implements? Selection, size, etc.)? For example, the drivers on both are probably short so thats no advantage there.
-
Are the following "new" features you previously mentioned in the Flik also in the Freehand?
(a) Slide-the-lock-forward-to raise the tools feature
(b) antipinch feature which comes into play after you separate the handles
(c) anti-rattle plier head
Yes to all three and the little bent pieces at the end of the slide are supposed to hold the head in the closed position and do not work on the Freehand so probable will be the same on the Flik. Ok my Freehand was used full time and the head just slides down the handles when I try to repouch the tool, not very clever whilst on the top of a ladder. I was hoping they would have altered that bit at least.
Dave
-
-
@Ice Tigre said:
Thinking clearly I'd say! Just what I've wished for on my spirit, and always needed on the wave; a small pry bar. If its properly tempered, that would work wonders in a lot of situations.G.
It is strong (I do not know how well it is tempered) I have used mine to rive stuff off walls and such. I always held it rather than the handles when putting heavy presure to the bar so as not to strain the axle. If you use the measure half open, it is easier to use and the figures are up against what you are measuring. While I was using my Freehand I thought and used that blade as a good pry bar with a useful measure on the side although the saw will be even more useful.
Dave
-
Dennis at www.Gerber-Tools.com says the Flik should be in stock next week.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login