Victorinox Phillips
-
Hi folks,
Maybe a new twist, maybe not. Anyhow, over the years there has been a lot of discussion about some of the Victorinox Phillips screwdrivers and why they sometimes slip.
I sat here looking at mine, and comparing them to standard #2 Phillips hex bits and had some pozi drive bits sitting there. Hmm, it kind of looks like some of the Victorinox Phillips heads are shaped more like pozi drive heads than true Phillips heads. Which might explain why they some times slip or cam out of regular #2 screw heads. I have used 1/4" hex pozi drive bits and had them slip out of screws made for #2 Phillips. So, it might not simply be the texture, but more the shape.
I wish I had some pozi drive screws to test this out on. If anyone has some pozi drive screws, it might be an interesting test.
In any case, here are a couple pictures to help explain what I mean.
The pozi drive is the middle one, #2 phillips to the right of that.

Picture courtesy of Bosch Do it Yourself UK
http://www.bosch-do-it.co.uk/diy/diyknowledge/lexicon/screwdriver-bit-types.shtml?alpha=83
Picture courtesy of MultiMat, global moderator of Multitool.org
/topic/2463Mike
-
So the Vics are more like posidrives then?
I don't have probs with them for an average sized head to be honest, but I know they are much maligned :-\
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login