Oil
-
I don't think it leaves a residue. On a SAK it just stays oil wet till you wipe it. On a sheath knife that lives in leather, the sheath will sort of soak it up over time, i just oil them every so often. Cheers Peter
-
Thanks for the Info

-
Duckman if you give it a try on a user. Buy a spray can of olive oil, that way you can get it into the nooks. If you don't like it on your knifes, make garlic bread with it
. -
Having lots of olive oil in Cyprus people will sometimes use it for lubricating. However, if it gets hot or exposed to the sun it goes rancid and can also "lock" the object you try to lubricate. If it gets close to freezing (5C) it also thickens and becomes similar to margarine. This happens to pure olive oil, as it comes out of the olive mill. The one you buy in shops may have additives that make it more stable. tip: fresh, day old, olive oil with salt and lemon makes a great dip.
-
@dks said:
Having lots of olive oil in Cyprus people will sometimes use it for lubricating. However, if it gets hot or exposed to the sun it goes rancid and can also "lock" the object you try to lubricate. If it gets close to freezing (5C) it also thickens and becomes similar to margarine. This happens to pure olive oil, as it comes out of the olive mill. The one you buy in shops may have additives that make it more stable. tip: fresh, day old, olive oil with salt and lemon makes a great dip.@Peter said:
Duckman if you give it a try on a user. Buy a spray can of olive oil, that way you can get it into the nooks. If you don't like it on your knifes, make garlic bread with it
.Thanks maybe I'll try it, I live in the tropic so might not work for me but will also by balsamic vinegar so the worse thing that could happen is around 3 days olive oil, balsamic vinegar soaked bread breakfast :)
-
Mineral Oil!

-
If you are after a good light mineral oil go into any good musical instrument store and ask for woodwind key oil. It comes with a needle applicator. Perfect for SAKS!
Sent from my Ideos using Tapatalk
-
@dks said:
Having lots of olive oil in Cyprus people will sometimes use it for lubricating. However, if it gets hot or exposed to the sun it goes rancid and can also "lock" the object you try to lubricate. If it gets close to freezing (5C) it also thickens and becomes similar to margarine. This happens to pure olive oil, as it comes out of the olive mill. The one you buy in shops may have additives that make it more stable. tip: fresh, day old, olive oil with salt and lemon makes a great dip.
Gday DKS you are 100% right about the oil solidifying {2c} it turns back to liquid as it warms up. I have used olive oil in cold weather on fixed blade knifes & hatchets. The leather sheaths would soak the oil up, so i never had a problem with the oil solidifying. Until recently i have not had a folding knife {this will be my first winter with one}. Your post has saved me from one of those WTF moments thankyou.
Peter -
So I asked in Boots, who gave me blank looks and tried to sell me cod liver oil, and a local DIY shop who tried to sell me chainsaw oil.
After some further research I think what I need to ask for is Liquid Paraffin.
That or buy it online I suppose.
-
You can try sewing machine oil, which should be available on sewing stores / sections.
Example: http://www.continente.pt/ProductDetailMain.aspx?productId=2352713&CategoryPath=4&CategoryName=&SubCategoryName=&PageIndex=1 -
-
One that rarely comes out on these threads, loved by some, unknown by many, it's Ballistol.
I have used it once in a while on the last 2,5 years, and have mixed feelings about it. A nice aspect however, is that it can be applied to wood AND leather to actually condition it.Here's a video by cutlerylover using ballistol to lub some knives:
-
Liquid paraffin is or was the only oil used in the "Aladdin Brand" lamps at one time. I still have an Aladdin Lamp and can't use it anymore because the lamp fuel (liquid paraffin) is not available anymore around where I live. These particular lamps are very similar to ordinary kerosene lamps, but use a mantle to create the light, like a Coleman Lantern.
-
So I asked in Boots, who gave me blank looks and tried to sell me cod liver oil, and a local DIY shop who tried to sell me chainsaw oil.
Lol, you forgot to visit the autoshop, they might have recommended some 10W40 ;)
I'm sure they would have suggested it!!
-
Here's a video by cutlerylover using ballistol to lub some knives:
....That video is so anoying at about 4 times the length it needed to be for what was shown, and I don't agree with how he lubricates a slip joint.
I do have Ballistol though I got for some real problem knives. Have not needed it enough on SAKs to really comment on it, but if I had more carbon steel knives it would certainly be one of the lubricants I'd keep around.
-
@ICanFixThat said:
That video is so anoying at about 4 times the length it needed to be for what was shown, and I don't agree with how he lubricates a slip joint.Well, I concede you that. Since youtube lift the 10min restriction, people are pushing longer videos which don't add much. :ahhh
About ballistol, to be honest, I don't use it on SAKs or other slipjoins nowadays. I use the so called mineral oil, which I have as the victorinox small bottle and the classic stuff used on sewing machines (an old habit coming from my parents). Mainly because it works and the small vic bottle with its needle like dispenser it's so practical!
Ballistol (B from now on) however I like it for a variety of tasks: to remove other oils (ex: clean a SAK with wd40, and then clean the wd40 with B), to get rid of water as B emulsifies with water, and to condition leather and wood. On a buck 110 like knife, for example, B can be used to treat the whole knife because it will protect the wood parts.
-
I bought some mineral oil to replace the little bottle of Vic oil I normally use. It seems the mineral oil I got is about 0 - 5 weight. It is closer to sewing machine oil, which is very thin. The Vic oil seems closer to 40 - 50 weight. The Vic oil is very thick and stays where you put it better. I am back to using the Vic oil.
-
Interesting, I have some Vic oil, but I've never used it yet. I can't give the precise weight of my mineral oil, but it seems pretty thick. When cleaning I use a lighter oil to flow in there and get the dirt out. I'll have to pay more attention to my oil, I'm shocked that this thread has grown to be this long given that it's hardly a new topic and SAKs seem to be pretty forgiving ehrn it come to lubricant.
Using "B" on a knife to also treat wooden scales is kind of new to me, so I'll keep that in mind as well. I have a lot of cleaning to do in the New Year I'm going try to monitor how the different oils work over the longer term.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
