Another sharpening question.
-
Factory edge are done by hand so they vary greatly from one to the other, but most tend to fall between 35° and 45° I'd say.
-
Spyderco is 15 per side I believe.
-
@captain spaulding said:
Factory edge are done by hand so they vary greatly from one to the other, but most tend to fall between 35° and 45° I'd say.
I was thinking it would be 25-35 degrees.

Not in my experience, I've had maybe 1 knife that will work with 30° setting on sharpmaker, and quite a few that are so obtuse 40° doesn't touch the edge.
-
I think Spyderco claims a 30 degree inclusive from factory.
-
All my Spydercos have been 30. Best thing is to do the Sharpie-on-the-edge trick so you know what/where you're hitting on the edge when sharpening.
-
From My experience most knives are 30 unless they are choppers and then you can go with a straight 40. Also you can do a primary bevel of 40 and then follow up with a secondary of 30 and finish it off with some 2000 - 2500 grit sand paper on a mouse pad to give it a nice appleseed shape this will make it hair popping sharp.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login