Vic Solo file work?
-
[quote author=Sidhartha link=topic=34188.msg555424#msg555424 date=1325726156]
you can use the dremel, i use diamond filesNooooo! :ahhh :ahhh :ahhh
I'm a 5th degree Dremel grandmaster. I wear out a Dremel a year and cannibalize them for parts to keep the others running. Even I wouldn't try filework with them. You'll never get near the quality that Sid does without some diamond files, the the higher quality the better.
http://www.ottofrei.com/store/home.php?cat=931
I've never done filework on a blade but I have carved a lot of titanium and platinum with diamond files for jewelry and you need that slow removal as well as the profile of the files to get the pattern right. A Dremel is a broadsword, you want a scalpel.
The Valtitan files are steel at 72 RC and they'll work too since Vic stainless is about 58. -
thats all true, i said "you can use it" of course you wont get the same results, i did it once and the result was not that bad, of course the pattern is very simple, you can´t achieve more elaborated paterns with a grinding wheel at 7,000rpm :D -
first you have to chose a pattern, you can just drawn two lines and let your imagination fly, use only basic shapes, round, oval, square, triangle and lines, buy a decent pack of diamond files of different shapes, i use round, half round, triangular, oval, the round and half round the most.
practice first in some scrap piece o metal, you can use something to measure the distance betwen each notch, in the vine pattern i first use the round file to start the oval sections, then with the half round i finish each section, then i fille the torns with the side of the half round file.
at the end you have to use sand paper to polish each notch, that depends of how coarse the file is. i use a polishing cotton wheel and withe compound to finish the blade.
anyway there are a lot of tutorials of the different patterns on youtube :D

-
Thanks for the advice guys. Great pics. I only want to do some simple work just to give the blade a touch of class.
Where would I get some diamond files from and are they expensive? If not, ill pick some up.
Cheers -
@5hif7y said:
Thanks for the advice guys. Great pics. I only want to do some simple work just to give the blade a touch of class.
Where would I get some diamond files from and are they expensive? If not, ill pick some up.
CheersAnd here too
http://www.amazon.co.uk/Draper-36325-12-Piece-Needle-File/dp/B0001K9TK6/ref=pd_cp_diy_2 -
That's a fair price for a custom knife. Thanks mate. I'll order them tonight and post pics when in done. thanks everyone
-
@Sidhartha said:
one more
When you posted this in a different thread it made my jaw drop. I didnt know filework could look so nice. I'm still in the practice on scrap blade stage, but I'm enjoying learning this. I've got lots more practice to get in before I can get one to look as nice are yours. But it was this blade that inspired me, I think it's beautiful.
-
Thanks for the advice guys. Great pics. I only want to do some simple work just to give the blade a touch of class.
Where would I get some diamond files from and are they expensive? If not, ill pick some up.
CheersAnd here too
http://www.amazon.co.uk/Draper-36325-12-Piece-Needle-File/dp/B0001K9TK6/ref=pd_cp_diy_2the second link you posted doesnt seem to say anything about being diamond? are you sure there what i want because if they are ill order those.
cheers for your help

-
also (not that i think i will even attempt it) would it be possible to put serrations on a blade with a diamond file?
-
would this be to ambitious for a first time

-
I would look for something cheap, like a carboot sale knife, or maybe an old shovel, or possibly even the frame of a junked computer (yes, it's aluminum, which is softer, so you have less margin of error) to practice on. Never tried anything like the pattern your showing, but that doesn't look that hard.
That is a phrase that always reminds of another- the easy way is always mined. :)
-
ive got some scrap to try on. also a really old and unusable gerber knife that can be attempt one after a practice. a friend of mine has done it on the spine of his house keys. it looks funky and he says it doesn't affect how the keys work.
i dont think ill do it on mine but you know :P
-
Thanks for the advice guys. Great pics. I only want to do some simple work just to give the blade a touch of class.
Where would I get some diamond files from and are they expensive? If not, ill pick some up.
CheersAnd here too
http://www.amazon.co.uk/Draper-36325-12-Piece-Needle-File/dp/B0001K9TK6/ref=pd_cp_diy_2the second link you posted doesnt seem to say anything about being diamond? are you sure there what i want because if they are ill order those.
cheers for your help

No I am not sure , I didn't notice at the first time !
, DON'T BUY IT
So .. Search in amazon and will find a lot of themHere are some :-
http://www.amazon.com/SE-Professional-Diamond-File-Grit/dp/B001BSJ7FE/ref=sr_1_14?ie=UTF8&qid=1325861586&sr=8-14http://www.amazon.com/Piece-Diamond-Mini-File-Set/dp/B0025Z8488/ref=sr_1_22?ie=UTF8&qid=1325861729&sr=8-22
http://www.amazon.com/SE-Diamond-Needle-Files-set/dp/B0019N6CV8/ref=sr_1_45?ie=UTF8&qid=1325861866&sr=8-45
And here are some from eBay :-
http://www.ebay.com/itm/Diamond-Needle-File-Set-Metal-Glass-Stone-Soft-Gr-/180728412782?pt=LH_DefaultDomain_0&hash=item2a1440ba6ehttp://www.ebay.com/itm/Diamond-Needle-Files-Soft-Grip-Lifetime-Warranty-/170529049108?pt=LH_DefaultDomain_0&hash=item27b452ca14
http://www.ebay.com/itm/10-Pc-Diamond-Files-Set-New-Chisel-Jewelers-Sharp-Point-/290653044105?pt=LH_DefaultDomain_0&hash=item43ac457d89
I hope you don't see my replay when you are drunk and buy them all :D
-
dont worry im not drunk :D. ive ordered a set of diamond files and ive got my scrap metal. just need the files to arrive and ill start practising.
i cant wait to get started. cheers for all the advice guys. ill post pics when im done

-
Looking forward to see how it goes. I saw a youtube vid once showing the stages of knife blade file work, I can't access youtube right now (at work), but you might want to search and see what you find
-
my files arrived today. so let the practice commence. as soon as i get the hang of it ill move onto a (old and misused) SAK.
wish me luck.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
