34th Annual SHOT Show
-
Ask the victorinox guys about the 84mm siccors.
And keep us updated -
<u>To Leatherman:</u>
-
The Juice has proved a long standing model and has been incredibly popular, partially due to the outboard tools as well as the size and nonaggressive looks. The main gripe being the ninja assassin drivers they decided to put inboard. Have they any plans to produce more fully/mainly outboard options across their size range, and revamp the Juice line with drivers that require less profanity - a colourful friendly looking urban tool falls down when it turns their users into cursing lunatics who keep bleeding on everything.
-
When are we going to see a revamped Sideclip with scissors instead of just being full of driver bits - 2HO and non-locking ensures worldwide appeal!! If they can made it outboard too all the better
-
Why have they decided that an awl is such a speSmurfpillsed tool which should be limited to so few tools?
-
Have they shot the Bro yet, if not - do they need volunteers?
<u>To Victorinox:</u>
-
Have they actually considered producing a pocket sized pliers based tool with non-locking components (ala Juice) utilising existing blade components? If not, why not and if so, why haven't they followed it through? I would suggest revisiting them hourly in different disguises to ask them the same thing over and over but slightly paraphrased :P
-
It would be great if they would do this on an 84mm compatible frame to also prompt a ressurgence in the line ... including scissors, but I'm sure they'd make a pretty fine pliers tool if they used their 74mm line as a basis too
<u>To Wenger:</u>
-
Same question - same hourly frequency >:D They are potentially at an advantage with the design, purely due to their primary line being 85mm.
-
Also, will they stop putting locks (or at least have non-locking options come back) on their more heavily tool laden 85mm models. It really buggers things up for some of us, and lets face it - nobody really needs locking blades on a SAK anyway :P
<u>To SOG:</u>
Has anyone popped in to the drawing office lately to see if anyone's alive? There doesn't seem to be many multitool developments coming out of there, and some of us are a little concerned about the guys inside.

<u>To Gerber:</u>
Feedback. The prevailance of combo edged blades can be quite offputting to many folk - pack it in! There's still a stigma of low QC attatched to the brand, even with more recent releases (Flik springs to mind). Are they actively pursuing this or is it actually a commercial decision that cheap and cheerful is the way to go, and the lottery is part of the fun. Keep up the innovations though guys<u>To Bear Grylls:</u>
Was he actually aware that it was the Suspension that Gerber were planning to slap his monika on, and how did he feel after he discovered the Suspension is one of the worst things they've ever waved under our noses. Side issue, if there's any snacks laying around near him, might be worth avoiding them - especially the ones that are trying to get away.<u>To Bear & Sons:</u>
GREAT tools ... but what happened, where's the new stuff
Non-locking options appreciated
<u>To Def & Co:</u>
Good luck, have fun, and thanks for being our eyes and ears
-
-
To SOG/Tool Logic: What happened to the Micro Tool Clip? I've not seen new ones since the initial batch, which included the MT.O version.
To Grant, et al.: Have fun, you lucky, lucky people.

-
I can address at least some of these issues, although there may be more up to date information in a week or so.
With regards to harassing Victorinox at the show about making new models- few if any of the reps there are from Ibach and the US office doesn't have much to do with new product development. I can pretty well guarantee that's a dead fish, although there is a guy from Ibach that I do see and talk to most years. If he's there I will talk to him.
With regards to SOG, there were plans to scrap the Mini ToolClip since before it's release, and the change to a Tool Logic branded tool may have only been a temporary stay of execution.I will find out it's current status, but I wouldn't hold my breath about it's continued survivability.
And, when it comes to new tools, SOG has been promising me for many years that they are working on a new tool. I am not at liberty to discuss something I may or may not have been shown on the hush hush last year, but if indeed there was something that I had seen but am not allowed to talk about, rest assured it would be one of the first things I ask about this year. >:D
Gerber has for the most part ceased development of what they called "bikini tools" which includes the Suspension and it's clones. Apparently Bear himself requested the Suspension, although I can't speculate on his reasoning. If I see him I will be certain to ask, but the story from Gerber last year was that he had selected it, not just Gerber ading his name willy nilly to things.
Bear makes more money off knives and so doesn't bother much with multitools. They likely would have killed the line off long ago had they not had a lucrative corporate rebranding business going with them, which is why you see a lot more Hard Hat, Crescent and Craftsman Bears than Bear Bears. They would consider making new versions, but in their mind there's no interest in them. Since there's no interest in them, they won't go to any effort. Since they haven't gone to any effort, we have no interest since there's nothing new. Since there's no interest there's no reason to make new designs. See the pattern?
That's pretty much all I can put myself on the hook for saying. Rest assured that all of the above manufacturers are well aware of us, and I'll pretty well guarantee they have been taking our opinions into consideration when making new product decisions, if for no other reason than because they know I will be grilling them about it.
Def
-
Thanks for the insights
Only other thing I can think of right now will already be on your list anyway ... the Gerber Balance 
-
I was looking more for any other booths or products I should look for.
Def
-
Ganzo? :D
Sanrenmu? :DBuck, Rough Rider, GEC, Cold Steel may have some interesting news...
-
Cold Steel doesn't go to SHOT anymore following a disagreement with event coordinators about booth size.
Def
-
Since most people around here have an interest in knives too, if you can see what new is coming from knife makers it will be nice.
Also any new flashlights will be interesting, if the manufacturers go to SHOT.
Mainly, have a good time. I am sure it is the kind of event in which you loose track of time.
:D -
It is indeed. We also usually harass as many knife and light makers as we can. In fact, we often get distracted going from one booth to the next and often end up late for meetings or missing them entirely because we find other cool stuff on the way!
Def
-
I can see the point the Bear makes about thinking no one is interested in them, because from what I have seen of the general tool using public, they are right. I know WE all like their tools(I am still drooling over the mini bear jaws and I WILL end up with one) but I have never met anyone outside of MTO that has even heard of them. When I tell them about Bear they maintain that I shouldn't waste my money and should just buy a Leatherman. Who knew the public would fall for brand association? :D
As for Vic, I love their stuff, I can't really think of too many improvements that would shove their tools past the level of awesomeness they have achieved other than maybe a less polished version of everything for grip. Darn spirits are slippery!
I want to see SOG come out with some better implements for their tools, not really any new actual tools. The lineup of swap-able components is small and some of them need updating. This seems to me to be a much more cost effective way for SOG to update their line without breaking the bank. I would definitely like to see more blade options and a new scissor for the powerlock. Maybe a Leatherman style bit driver or something as well. And a Blade exchanger!
I'd like to see a new gerber that fits traditional lines like their MP series, no more of this odd shaped odd-ness that is supposed to make MT's more mainstream. I'm not really a fan of the crucial/octane shape. They seem to weigh a bit too much for what you get too.
-
Keep your eyes open for the Gerber Balance. Maybe you could take the opportunity while you have them cornered to ask them why the delay... Or when it will be out?
-
I will certainly be grilling Gerber about the Balance and documenting anything new they may have.
Def
-
Make sue you grab lots of stickers and the promotional items from every table for MT.O giveaways :D
-
Something else, I'm thinking they should have the new Charges and Waves with the replaceable cutters there. Can you get some pictures of them next to the old style for comparison? Thanks :)
-
We will certainly have pictures of whatever they have!
Def
-
Maybe you could ask around about a Multitool with diagonal wire cutter heads.
A lot of times I don't need pliers and when I do the pliers are not the best tool for the job. If a tool had a decent set of FORGED and heat treated anvil type cutters it would never wear out from my usage. The problem that causes the damaged cutters on all the "standard" wire cutters is the cast (soft) plier head. If someone made a set of diagonal cutters instead of pliers we would have a great tool.
I keep hoping to find a good set of diagonal wire cutters cheap at a swap meet or yard sale that would serve as the basis for the new tool...but making your own is not all that easy even if you had an entire machine shop available...just ask Bob. Maybe this would be a possible tool for Paladin? Paladin in partnership with SOG makes some great datacom tools....a PT-510 sized with compound leverage diagonal wire cutters instead of pliers would be great. And I'm sure they would sell a lot of the plier heads that we could put on our PPP's and then maybe SOG would sell some PPP's.
Bruce
-
We've been down that road before and it usually doesn't go anywhere.
The folks at MTO are working on a way to solve that issue, so if SOG won't then maybe we'll have something to offer you soon. >:D
Def
-
@Bruce909 said:
Maybe you could ask around about a Multitool with diagonal wire cutter heads.A lot of times I don't need pliers and when I do the pliers are not the best tool for the job. If a tool had a decent set of FORGED and heat treated anvil type cutters it would never wear out from my usage. The problem that causes the damaged cutters on all the "standard" wire cutters is the cast (soft) plier head. If someone made a set of diagonal cutters instead of pliers we would have a great tool.
I keep hoping to find a good set of diagonal wire cutters cheap at a swap meet or yard sale that would serve as the basis for the new tool...but making your own is not all that easy even if you had an entire machine shop available...just ask Bob. Maybe this would be a possible tool for Paladin? Paladin in partnership with SOG makes some great datacom tools....a PT-510 sized with compound leverage diagonal wire cutters instead of pliers would be great. And I'm sure they would sell a lot of the plier heads that we could put on our PPP's and then maybe SOG would sell some PPP's.
Bruce
Fantastic idea. I think SOG really underestimated the interchangeable factor when the limited their selection to what it is. They need to develop more components for us to buy, and your wirecutter head idea is a great way to start. I can think of plenty of guys who would kill for a wirecutter multitool. They'd even carry it with their EDC multi at work.
-
Ask leatherman folks if they are coming up with new Vise Grip models ala Crunch.
Or even wrench based tool. That would be nice.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login