Gerber Fan Club.
-
What Gerber lack in consistency it makes up for in innovation and having the guts to try something different.
Many times they have got things very wrong ... the "dead fly" springs to mind

This got sent on a passaround with Kirk13's mini suspension, and I hope it hasn't left a trail of injuries in it's wake. I'm sure that thing was sponsored by Elastoplast. As for my experience with some of their other offerings, I appreciate how important the multiplier was in the evolutionary cycle, but I can't bring myself to use mine for fear of a profanity overdose and terminally mangled palms. The Flik was ... well ... flikkin hopeless, or at least mine was. Great idea, shame about the excecution ... but every now and again ... they do come up with a real winner.

I know the MP700 doesn't seem to garner much attention round here, but I've found it to be an excellent everyday tool, and it's one of my most carried items. Outside opening tools with scissors, a 3D phillips and indexable cutters ... I'm continually surprised it wasn't more popular and got dropped from the line.
The MP600 is certainly iconic, but needed the help of an ugly bearded chap in a far away land to realise it's full potential :P


:D
Gerber deserves the scepticism for their quality and consistency historically and indeed for some of their designs, but they also deserve recognition for some good gear which has been overshadowed by another company ... who actually accounts for the bulk of the tools I've gotten rid of in the search for something that works as well as the MP700!
I think the reasons for their failures is the same reason they've had some very successful innovations ... they're completely bonkers, and I'd have a pint with them anyday
:D :D -
I think the reasons for their failures is the same reason they've had some very successful innovations ... they're completely bonkers, and I'd have a pint with them anyday
i totally agree. there ideas are crazy and sometimes crazy pays off. leatherman are great but they do play it safe at times.
a perfect example of leatherman playing it safe IMO is the rebar. the supertool300 has done well so they release it smaller.(dont get me wrong, i really want one :D)
-
the 600 is a great tool
the 650 is even better
the 800 is the best if you ask me. I have a hard time finding saws that fit but the saw works great. The pliers are nice and the tool load is good.
I also like the diesel
The freehand is okay and would better if not for the tool load -
Count me in. I like the odd ball items better than the run of the mill stuff.
The 650 Evolution and the 500 Recoil are the first two that come to mind for me.
-
I'm in. My MP450 is one of my most-used multis. The Octane is a great little tool for what I need, and my BO MP600 is just sweet.
-
My first MT was a Gerber BO Blunt nose Multi-Lock. That was stolen. Since the place I got it from no longer carried them I got the new MP600 w/needle nose and bit kit. It was my only MT for almost ten years. It served my well in that time. :D
-
My MP600 Bluntnose is still my most carried tool. 8)
these I don't carry


-
Those are 8) Dennis.
Some more Gerbers. -
Like I said before, you can sign me up. :D


-
A few more Gerbers. :)
-
@Chako said:
Like I said before, you can sign me up. :D

WOW, I can't believe how many MT's you have! I have a modest collection and I think my wife mentally tallies it up when I show her my box of goodies, and I get a look. If I had as many as you, I think I'd be killed. I like your tool box tray system. I have a plastic tackle box and its straining under the weight of the MT's. I think I'll invest in a metal toolbox next.
-
shif7y, both.
Here is a drawer by drawer look...the latest which dates last September. It is always growing.
Collection Walkthrough...drawer by drawer.
Collection Walkthrough. Going from top to bottom in the first chest and cabinet. Top drawer. Next down, Buck Mts on the left, the middle deep drawer is full...
Multitool.Org Forum (multitool.ninja)
-
I have not been a huge fan of Gerber in the past, but I have to say I really miss my MP450. I would love to have it back. I am kinda starting to like the Gerber Multiplier design, and have acquired 2 this week with on hopefully coming next week or the week after. I am gonna try to EDC them as much as possible to really get to know them and appreciate them for what they are. I also have a SOG coming, a powerlock without gear covers. I plan to carry that turd at work and see how it holds up. I don't drive many screws at work so I don't see many angry red gear marks in my palm forthcoming.
I got a little nostalgic today, I was dickering with Stressmaster(wayne) about a trade and as an afterthought he added that he had an old Gerber that he was willing to toss me for my wares. Turns out it is the same original non locking gerber that my dad had when I was a kid. he gave it to me for a while, then he bought me a pst around 96 and I never touched a gerber again until last year. I want that gerber back so wayne presented me with an awesome opportunity.
The other Gerber I have gotten this week is a BO MP600 with carbide cutters. It has to take a trip to Gerber because the serrated blade broke off while I was testing the knife and the carbide cutters are both chipped. Other than that it's a steal for the $20 I am paying for it. I really like the phillips head on it so far, and the knife blade is pretty cool, I like the flat edge. Maybe these gerbers aren't all bad!
-
Gerber never was bad. They made a few bad tools because that's what the masses wanted- something cheap at Wal Mart. Then they made clones of those bad tools because that's also what the paying public wanted. The good Gerbers never went anywhere, they were just not celebrated as much as the cheaper ones, because a) the cheap ones were everywhere and b) everyone had something to complain about.
Meanwhile, the good tools were doing the hard jobs without fanfare or limelight simply because it needed to be done. So, while a lot of people may condemn Gerber for the cheap tools, Gerber was actually having their cake and eating it too, supplying both end of the market- something I may add that Leatherman is trying to do this year with the Wingman and Sidekick.
Face it, Gerber may have it's drawbacks, but they are no slouch, and are probably responsible for more industry innovations overall than any other company on the market.
Def
-
I'd agree, and even though I've had my own issues with Gerber they really are still one to watch. I've had mixed results in terms of design and quality with them, though one thing that's stopped me buying many of their more successful items is my own personal preference for outboard tools. Otherwise I'd have far more of their MP400's and 600's.
Outboard tools is an area they have been very keen to explore, and I've tried three models so far. One was cheap garbage, one was a nice idea that wasn't followed through in QC, and the third was initially disappointing but the replacement was a roaring success for me. I've also had other stuff that's been excellent straight out of the box.
They still keep chucking out new stuff though, new ideas, good ideas - they just need to hang onto everything in R&D a little longer and resolve their consistency issues. Inspection, field tests and defect analysis should be done by them not us >:D I know Gerber will always be chasing innovation and champions of new designs. I also know that if I buy one, sometimes I'll end up with a great tool. I feel like Gerber is going "Here guys, we made a load more - try these" to which I want to say "No, YOU try them, and then sell us the ones that work made to the same standard ".
I do like Gerber and they have a lot to offer, but my feelings today is that some of their stuff is like store bought axes and you have to rummage through a box to get a good one. If they can address that perception, and genuinely get some better consistency, they'll gain a lot more market share I reckon. When I know that when I pick up a Gerber it will be of a consistently good standard of manufacture (designs aside) like I can with other manufacturers, I'll certainly lean more in their direction as their designs are often far more abitious than any others out there
-
@Grant Lamontagne said:
Gerber never was bad. They made a few bad tools because that's what the masses wanted- something cheap at Wal Mart. Then they made clones of those bad tools because that's also what the paying public wanted. The good Gerbers never went anywhere, they were just not celebrated as much as the cheaper ones, because a) the cheap ones were everywhere and b) everyone had something to complain about.Meanwhile, the good tools were doing the hard jobs without fanfare or limelight simply because it needed to be done. So, while a lot of people may condemn Gerber for the cheap tools, Gerber was actually having their cake and eating it too, supplying both end of the market- something I may add that Leatherman is trying to do this year with the Wingman and Sidekick.
Face it, Gerber may have it's drawbacks, but they are no slouch, and are probably responsible for more industry innovations overall than any other company on the market.
Def
Very good point about Leatherman. I understand the practice, I just can't stomach the result too well. I don't care for the Wingman and sidekick any more than the crucial. But, if they are making the companies money so they can stay in business and keep making tools I DO like then so be it. I am starting to realize that the good gerbers were always there, and I am just discovering how useful and cool they really are. It's like discovering MT.o all over again! Tons of fun with many many models to buy and look forward to using. Like I said, two new gerbers this week with more coming if I can help it!
-
Here's another point worth looking at- everyone craps on the Crucial and rightly so, but the Crucial FAST is actually a good tool. While the ergonomics haven't changed, the assisted opening blade, better materials and longer drivers actually put the FAST version quite far ahead of the original Crucial.
Al- I agree and disagree with your points about quality control. I find that to be accurate for some of the low and mid point tools from Gerber, but I have rarely seen an MP600 or 400 with factory defects. Most of the time when I encounter a broken one it's because it was used for a job above it's abilities, which to me, speaks volumes about the inherent quality and feel that caused someone to think it could handle an extreme job. Now getting into the more involved tools, like the MP700, MP800, Diesel and Flik where they are somewhat more complex, yes, for those I will agree with your point, although I'm not certain the number of bad ones is as high as you are suggesting. I think you have been extremely "lucky" to have gotten as many bad ones as you have, although in your situation I'd probably feel much the same as you do.
Def
-
Yeah, I've seldom heard anything bad about the MP's quality - unsuitability of design maybe, but thats personal preference and like I say if it wasn't for my own preferences I'd own a lot more. All my disappointments were indeed on tools which had extra complexity, or where they were trying new concepts. I wasn't a fan of the Solstice for example - but it was bloody well made from what I could tell. My only experience of the MP400's and 600's is a DET which I tweaked a bit, but I got the feeling they'd be good dependable tools for many people
For the benefit of all I'd like to clarify that I've not been trying to "preach" here in any way, just vocalise my experience and share what would make a positive change to my own personal perception. I'll continue to keep trying Gerbers as they do keep pushing the boundaries and trying new concepts, but from my own perspective I would like to see a better success rate in quality. I generally have confidence in their designs, and I want to have the same confidence in manufacture when I try something new from them

Personally I see the delay in the release of the Balance as a step in the right direction. Something obviously wasn't ready for market - so they didn't let it out. Good on ya Gerber
I'm really looking forward to hearing what you find out on that at the show ;) -
The day anyone craps on someone else's actual hands on experience on this site is the day after I've folded up shop and started a Hello Kitty website.
When it comes to complexities in tools I think Gerber does indeed have some issues- the pawls on the Flik are a good example. They seem like an overly complex solution to a reasonably simple problem no one knew they had. This can lead not only to assembly issues but can even go as far back as component manufacturing issues since I believe Gerber contracts these out. If they were made in house by people who were on the process from start to finish I think we'd see a marked difference in not only the simplicity but also the reliability of these tools.
That makes the frustrating sometimes, but not bad- I love my Flik, despite it occasionally locking up on me.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login