Improving the mini Leatherman scissors
-
I'm a big fan of the Squirt PS4 and more recently the Style PS and while I enjoy having a pair of scissors handy for certain tasks like trimming my hand rolled cigarettes or an errant thread or hair, I don't feel the need to carry scissors bigger than what's on the Style, Squirt of 58mm Vics. My only problem with the mini Leatherman scissors is that they don't cut very well, while the Vic scissors are pretty much perfect. So I looked carefully at the LM scissors and came to three conclusions that hindered performance. The edges were very dull, the bevel angle was close to 90 degrees and the blades weren't curved into each other like on the Vics.
So the first step was to reprofile the bejeesus out of each edge bevel and then sharpen them to hair shaving sharp.


Step three was a bit trickier. I opened the scissors wide and clamped the pivot tightly using an LM Crunch. I then curved the tips to about halfway down the blades using the pliers on an XE6 and then curved the base of each blade by forcing them down onto a hard surface.

The difference is tremendous and they work quite well now

-
Very nicely done.

-
Great stuff.
I've got an 84mm alox mod with Vic scissors that need this treatment... bit scared to mess with them though!
-
I use my PS4 scissors quite often during the warm weather months and I've always been satisfied with their performance, but I can see how your modifications would improve them. Might they need more frequent sharpening with that lower angle?
By the way, I just took a look at my PS4 and I have to say that I am impressed that you could work successfully on such tiny edges.
-
To be honest I'm new to scissors sharpening and tend to test the extremes when I'm learning about something. Most of the scissor bevels I've looked at appear to be at 60 degrees, which for a chisel grind equates to 30 degrees per side for a double beveled edge. So my reasoning was since I only use these for light duty tasks (the Style PS has pretty good wire cutters for heavier duty things) lets try something lower and I ended up at roughly 40 - 45 degrees, which is an often recommended edge angle for hard use knives. I don't expect much edge degradation from light cutting tasks but will report back when/if any problems seem to occur.
One of the blades is easy to sharpen, just open all the way and have at it on a hone. The other side is tricky and I ended up opening the scissors to about 110 degrees, clamping the pivot with the Crunch and folding the body of the scissors a little more than half closed which made things much easier. But really I'm basically just a crazy man with OCD :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login