Taylor Brands Booth
-
While walking around SHOT I noticed a pungent smell and started to worry that perhaps I'd stepped in something awful somewhere along the line. As it turns out, it was worse than that- we were standing next to the Taylor Brands booth. ::)
I looked at Bob and asked if he wanted to get closer and he said that since he had gotten a tetanus shot recently he'd be willing to give it a look. In hindsight we should have worn gloves and condoms, just in case. I'd never encountered a Chinese made ST1 in real life, so I was a bit curious to see just how bad it was.
As we got closer we noticed a standard grey Tuff Tool and black one with yellow lettering. I asked if it was the Australian Army Issue model and the guy just kind of shrugged as if he'd never heard there was such a place as Australia. I asked to see them, and I pulled out the light tent as the guy pulled them out from under the glass to show us. As I busied myself snapping photos of the black one, Bob was fiddling with the grey one, and when I heard a snort of derision from him I looked over to see what was wrong- or rather which of the many things wrong with it that was currently catching his attention.
Well, it seems that ol' Bob had given them a little squeeze and almost crushed them- the handles were now bent together! Now in fairness, they still looked normal enough, but a quick side by side showed there was a distinct difference in the handles now!
Needless to say I took a few more quick shots, we handed the tools back and got the hell out of there before they demanded we pay the $13.95 replacement cost on it!
In case anyone is wondering why I'm always down on Taylor brands, this is exactly the reason- they make monkey poo and try to pass it off as something you would want to own. So, to Taylor, I extend a hearty middle finger in your general direction. Eat a smurf you smurfs.
Def
-
Taylor brand sucks big donkey d*** :D
-
Anyone else picking up on the subtle signals that Grant maybe doesn't like Taylor tools all that much? ;)
-
Funny you should mention it, I thought I detected a slight undercurrent too
-
Really?
I didn't notice anything...
:) -
I think I'm gonna link this thread to their FB account. :D
Whoops! They don't actually have one!
(Well they have one, but no friends. :()
:D
-
Taylor Tools. They put the cheap in cheap.
-
Well it was better than I expected. I was thinking the photos would be of a big un flushed poo in a toilet bowel. :ahhh.
I see the poo it just has not found its way to the toilet yet
:D.Mr.Taylor I suspect is a soulless vampire :( :(
-
I think it is sad how they got a hold of Schrade and took a company that put out a decent product at a decent price and destroyed them...
-
Ofcourse they would break if Jsews squeezed them.. its a destruction test.
Give them to someone with normal strength! :D -
These tools are bad, bad, baaaad. :P Honestly, like Grant said, I could feel the handles yielding as I gripped them (and not with any superhuman powers either!) The comparison picture above shows it; the stainless handles are bent about a half-inch (12mm) closer together than the black handles, just from me squeezing them. :P Yuck.
The official tool of the Australian Army...perhaps now would be a good time to consider an invasion
:D -
This evasive doublespeak has me confused. :-\
It almost seems like you guys are recommending them.
:) -
So are the Schrade versions any better?
Stay multi my friends
-
That's a pretty damning report!

-
@Beerplumber said:
So are the Schrade versions any better?Stay multi my friends
10 x 1099 times better

-
Im confused as to how bad that metal must be then? Is it made from recycled pop cans, or did they just skip the head treat step after then made the parts?
-
@Beerplumber said:
So are the Schrade versions any better?Stay multi my friends
Very much so; not only that, but the leather sheath that came with mine is, though large as frack, very, very nice.

-
At least Taylor owns those designs, unlike Sheffield who last year took an existing Chinese design, slapped their name on it and called it an "in-house design".
Edit: Sorry, make that multiple Chinese designs
-
@Syph007 said:
Im confused as to how bad that metal must be then? Is it made from recycled pop cans, or did they just skip the head treat step after then made the parts?The sheet metal steel in the handles was very soft, with no spring-iness to it at all. Thus, I can only imagine what they made the blades out of. :P
-
Im confused as to how bad that metal must be then? Is it made from recycled pop cans, or did they just skip the head treat step after then made the parts?
The sheet metal steel in the handles was very soft, with no spring-iness to it at all. Thus, I can only imagine what they made the blades out of. :P
Ah..gotcha.... so these are more sold as bad movie props, not actual tool usage. Was there a disclaimer in fine print somewhere about this being for novelty purposes only?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login