Did you notice the new design small screwdriver?
-
@stressmaster5000 said:
They have been squared off for awhile now, but I thought it was to keep them from rolling once you lay them down.
That's what I had thought, and then I was looking at it, and I said "That looks like a 1/4 inch bit..."

-
ingenious!
-
:D -
I must admit I like the looks of the rounded style better, but its not really a big deal
-
I was aware of the new shape, but I hadn't thought of the fact it might fit a 1/4" socket, very clever mate.

-
Well I can't say a driver that small would ever NEED to go in a 1/4" wrench. Finger and thumb would generally be enough I reckon, BUT it does open up the possibility of storing additional mini drivers in other hex storage wotsits.
Well spotted mate

-
Well well well. I also was aware of the new shape but hadn't clued into its use as a bit driver. Good catch.
-
What a clever find! Is there any record of this being discovered before? I did a few searches and haven't found no one referring that. Wonder if Victorinox did it on purpose of if this was just a coincidence, due to the involved measures...
-
@Gareth said:
I was aware of the new shape, but I hadn't thought of the fact it might fit a 1/4" socket, very clever mate.
I had noticed that about the one that came with my WorkChamp, but didn't consider it would fit into a bit holder like that. I also assumed it was just for anti-roll and more grip while using it.
Nice find. Makes me want my new CT34 even more now! (Should be here on Wednesday.)
-
-
@Gareth said:
I was aware of the new shape, but I hadn't thought of the fact it might fit a 1/4" socket, very clever mate.
+1
New shape was discussed quite a while back, but not sure if anyone had figured out it fit a 1/4" bit driver yet. Not sure how practical this is, but it is a very nice find and might come in handy one day.
-
@Heinz Doofenshmirtz said:
Nice find. Makes me want my new CT34 even more now! (Should be here on Wednesday.)
That's good and bad. Good because the CT34 is an awesome tool, bad because the bit driver is only 4mm hex whereas the mini screwdriver is 6.5mm (1/4 inch) hex :-\
Doh!

Actually, TS, that reminds me, do you know if there are any T6 bits that are compatible with the CT's bit driver? I'd love to find a T6/T8 bit for it because those are the two sizes I use most often.
-
@Heinz Doofenshmirtz said:
..... do you know if there are any T6 bits that are compatible with the CT's bit driver? I'd love to find a T6/T8 bit for it because those are the two sizes I use most often.Yes a T6 is available, but hard to get. Check with Neil, he might be able to help.
-
@Heinz Doofenshmirtz said:
..... do you know if there are any T6 bits that are compatible with the CT's bit driver? I'd love to find a T6/T8 bit for it because those are the two sizes I use most often.
Yes a T6 is available, but hard to get. Check with Neil, he might be able to help.
Cool! Thanks! A combo T6/T8 would be perfect for maintenance on my Spydies!
It makes me wonder though, if the bit driver could be magnetized to help it hold bits more firmly. Might be a possible solution to allow the use of Wiha bits.
-
You could try stroking the bit driver several times with a magnet to magnetize it.
Or similarly magnetize the bits, which are considerably smaller and may take the effect more strongly.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

