My tti work in progress
-
@8thsinner said:
I think it's probably easier if I keep all mods and work in one place, if thats okay. If not let me know...We aren't that uppity about which topics go where- post where you think it's appropriate!

Def
-
Awesome, I will keep most of it in here then and any significant mods I will post up a link in the mod section.
-
Here is a little trick I created to turn my leatherman into a leather working tool. A lace cutter.

In this image you can see a replaceable razor blade held in with pressure by the belt clip that comes with the leatherman, this is a TTi but I think all the charge models have this area.
You have to fiddle with the back side of it a little bit, but once it's locked in place the friction lets it go nowhere...
A slightly different view point...
You can see here what way the lace goes in, and that the lip of the clip is the edge guide for it.
Raised view point, I keep the other side up also to help in alignment.
This is how the thumb locks the leather down so it doesn't slip of the edge guide.I haven't tried this on the round just yet. but if you have a long piece and need 5mm laces it's a pretty good version. It doesn't work as well as a the tandy lace cutter for very soft (anneline) type leathers but for kangaroo or thicker stuff it's very very good.
I also intend to get some sort of shim system worked out so that I can adjust the width of lace cut.
It cuts slightly over 5mm laces, so if your a whip maker or something like I am, this is a perfect little tool...More to come...
-
Here is where I store a 2mm rare earth magnet.

Not only good for magnetising the tip, but also turns your micro screw driver/needle into a compass. and yes it does work...
Here is a needle magnetised with it beside my main ranger compass...floating on a shaving of beech in my hat...

-
Another leather work usage for the leatherman.
I find these two pieces really handy for marking leather edges for sheath making. Not that my stitching is any good. But the groover works...
Set it up like this, bit port loosened and pushed back, lanyard ring pulled out and leaning up against the other handle.
You can see where that little edge bites in. I used my strop to illustrate this which is very hard but it still shows well enough.
As you can see, works fine. If you want a deeper edge, which I might change mine too, you can round off the slight corners and smooth it a little.Btw, the distance is 4mm, which is actually perfect for sheaths because after the edge has been burnished it turns out to be more like the standard 1/8th that people prefer.
-
Wow those are excellent ideas! I like the magnet one best as I'm outdoors quite a bit. Keep em coming.
-
@tattoosteve99 said:
Wow those are excellent ideas! I like the magnet one best as I'm outdoors quite a bit. Keep me coming.You wanna take the opportunity to rephrase that?
lol -
Fixed.

Stupid autocorrect -
I have a few to go, but won't have opportunity yet. And I will be trying to cut down a spanner before I move on...Nice simple mod to start with.
-
Well, I grew four days worth of growth there to test the new edge for shaving.
Well it's no where near as clean as a cut throat shave but passable.
Though it's definitely not comfortable on the right side as it is the left because of the half inch of handle in the way. Didn't get any cuts though.Well, there you go, just an update.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login