Wave Owners Club
-
Yea, I've found that if I have the bit extender in, and I'm spinning a screw, that I have to be careful or my thumb will catch a blade hole and pull it out slightly. Almost an "ouch" moment.
-
@Dunc said:
If you do manage to wear down the little nib then this would be covered by the warranty.A very good point!
@turnsouth said:
Yea, I've found that if I have the bit extender in, and I'm spinning a screw, that I have to be careful or my thumb will catch a blade hole and pull it out slightly. Almost an "ouch" moment.That's what happens to me. It is only in that scenario too, when using the screwdrivers. Any other time the blades stay closed just fine.
-
I took no offense to it, and I didn't mean any in my post. It's a good forum because everyone can share their opinions. Everyone has different needs for their MT so a tool that might be perfect for some people may not suit another person as well. Also even though a wave is a wave, quality control is never the same on every tool made so my experiences are not going to be the same as everyone's.
I do agree the thumbhole is no spyderhole and I do like to carry a dedicated folder whenever I can. If i'm carrying a folder I don't care if my MT is OHO or not, actually my last 3 tools have all been "traditional" MT's. But when I can't carry a folder or if I don't want to then the wave is my first choice.
I don't have any experience with the blast, I've just never had the opportunity to play with it, i'll keep my eye out for one though. I just bought a ST300 and I love it, it's just a little big for edc Lol.
I know what you mean about the mini-driver, it's kind of a love-hate thing because I've only used it once or twice but when I needed to it was a huge saver. It's just the least used implement on my wave.
As far as the skeletool goes, I like the design, the weight, and all the carry options it has but I don't edc it as much as I thought I would. If I don't care about the weight then I carry a slightly heavier and larger tool for more functionality. And when I do care about the size/weight I find myself just carrying a SAK. That being said I still really love the tool and I think it's a pretty innovative tool.
-
I took no offense to it, and I didn't mean any in my post. It's a good forum because everyone can share their opinions. Everyone has different needs for their MT so a tool that might be perfect for some people may not suit another person as well. Also even though a wave is a wave, quality control is never the same on every tool made so my experiences are not going to be the same as everyone's.
I do agree the thumbhole is no spyderhole and I do like to carry a dedicated folder whenever I can. If i'm carrying a folder I don't care if my MT is OHO or not, actually my last 3 tools have all been "traditional" MT's. But when I can't carry a folder or if I don't want to then the wave is my first choice.
I don't have any experience with the blast, I've just never had the opportunity to play with it, i'll keep my eye out for one though. I just bought a ST300 and I love it, it's just a little big for edc Lol.
I know what you mean about the mini-driver, it's kind of a love-hate thing because I've only used it once or twice but when I needed to it was a huge saver. It's just the least used implement on my wave.
As far as the skeletool goes, I like the design, the weight, and all the carry options it has but I don't edc it as much as I thought I would. If I don't care about the weight then I carry a slightly heavier and larger tool for more functionality. And when I do care about the size/weight I find myself just carrying a SAK. That being said I still really love the tool and I think it's a pretty innovative tool.
No worries, I don't think anyone was offended here! :D
I was just giving my (redundant) opinion and you know what they say about those... ::)
I believe I've kicked the proverbial dead horse with my thoughts on the wave, so I won't proffer any more until directly asked. Or until it's mentioned in another thread and I've had a few too many!
I totally agree about the ST300. It's a fantastic tool but for me at least is is too large for a comfortable EDC. The blast fits my hands very well and since it has been on my belt for the longest, it stays there.
This forum IS a great place to voice your opinions and would be quite dull if all of the opinions on here were the same.
-
I seem to have the newer version with the awl, but I don't understand the separate tiny screwdriver as a stand alone. Upon looking at it two things come to mind. One, why couldn't they have made a normal bit insert that has that small of a blade or philips head. Second, if they wanted to keep the small metal pin, why not create an aluminum insert for the normal bit holder that just had the same hole as the small screw driver stand alone holder. The stand alone is the same thickness if not thinner than the normal bits. If they did that then the tiny screwdriver could be a some other big tool. Don't know what that would be, but the more the better.
EDIT:
I actually have a Surge, but the same thing applies to the Wave or any of the LM's with a bit holder.
-
Hi Gang,
My Birthday was Tuesday, i received a new wave from my better half. I guess all my hints
paid off :P so yes please count me in..I have a question, I know there built to tight tolerances but some of the smaller inner tools such as the small bit driver and large bit driver are a bugger to get out, i have been working them and seem to still be a bit tight, i was wondering if its ok to use Graphite for a lube i use it for locks and it works
wonders.. Thank You in advance -
Congrats on getting a Wave for your Birthday
They are a great tool . I wouldn't have thought a bit of graphite would hurt at all . Let us know if it does the trick .They can be a bit tight at first . The funny thing is the last Wave I got was a bit too loose out the box and I had to tighten it up . -
@reezen_60 said:
Hi Gang,
My Birthday was Tuesday, i received a new wave from my better half. I guess all my hints
paid off :P so yes please count me in..I have a question, I know there built to tight tolerances but some of the smaller inner tools such as the small bit driver and large bit driver are a bugger to get out, i have been working them and seem to still be a bit tight, i was wondering if its ok to use Graphite for a lube i use it for locks and it works
wonders.. Thank You in advanceWelcome to the forum reezen_60.
I can't see an issue with graphite myself, I know I've used it on a Victorinox before with good results. 
-
UPDATE
I used the Graphite for the lube and worked great, I really dont care to use oil or WD40 on any of my knives, its a dirt & dust attractor, its messy, smells ect...Give it a try next tyme you clean and lube your multitool i think you'll like the results... -
Thanks for the update , it's something I've never tried myself and I really should .
-
Just picked one up a few minutes ago from home depot. I've been thinking about getting one for a while and after reading this thread I was pretty sure that's what I wanted. I have the skeletool and a SOG power assist already, but I needed more tools than the skeletool, but something smaller than the SOG and this seems to fit the bill perfectly. Plus the pouch will hold my flashlight, firesteel and emergency whistle (My camping/hiking essentials)
-
Welcome to the club darrellb :D
-
Already in but added this over the weekend..

-
BO Wave

-
I've had my Wave since they originally came out. I kept hinting for one after LM introduced them, and wouldn't you know my sister bought me a Gerber Legend for Christmas!
When she went to purchase it, the salesman told her the Wave looked "cheap and flimsy" while the Legend was all that and a bag of chips.I had to buy it myself. I might forget to go out without clean underwear on, but if I'm ever in an accident, I'll at least have my Wave!
Regards, Bill.
-
Congrats Bill!
Yeah, the Wave definitely kicks the Gerber 800's butt and then some 
-
This is my second Wave (I gave the first one to my brother), and the more I EDC it, the more I love it.

-
I own two of the old models and two of the new model Waves. Did they ever make the retired Wave in a black oxide version? I'd love to find one if they did.
Scott -
I'd really like to see a BO sideclip or Crunch.
-
I own a SS steel one, I put the black pocket clip on it and I love it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login