Suspension 1 week
-
I know WalMart stocks products that were made specifically for WalMart sometimes, but I'm not aware of any multitool manufacturers doing this. I wonder if the boys at the SHOT show heard anything like this. It might be worth a look at a Suspension from another store to see if there are any differences. My Suspension rivets don't look like aluminum.
I once was looking for a Quantum reel & saw that WalMart had a better price than KMart. When I looked closer I saw that the WalMart model had an extra letter in the model number & one less ball bearing than the regularly-available model everywhere else. Turned out Quantum had made a deal with WalMart & was making a special model with lesser specs. No wonder it was a better deal.
-
Yeah twice is just twice too many. :( At least you tried it again though buddy. We should all re-try a tool we wasn't keen on for a week and see how we get on.
I suppose i'm lucky in that respect, i don't have a tool in my collection that i wouldn't be happy to carry around with me all the time. It probably means i haven't been spending enough money on random tools!!
Well I have one that I am not as keen on as I thought I would be. I will carry it again soon to see if my feelings have changed.
-
Yah I felt kinda bad that I had been slamming the tool so much here that I just had to give it a second go. But since this time failed again, well now I dont feel as bad.
Maybe someone from Gerber will see this.
-
@Tom Munch said:
I know WalMart stocks products that were made specifically for WalMart sometimes, but I'm not aware of any multitool manufacturers doing this. I wonder if the boys at the SHOT show heard anything like this. It might be worth a look at a Suspension from another store to see if there are any differences. My Suspension rivets don't look like aluminum.I once was looking for a Quantum reel & saw that WalMart had a better price than KMart. When I looked closer I saw that the WalMart model had an extra letter in the model number & one less ball bearing than the regularly-available model everywhere else. Turned out Quantum had made a deal with WalMart & was making a special model with lesser specs. No wonder it was a better deal.
Tom, you may have hit upon the answer there. While I do not doubt that both of Hawkchucker's Suspensions had aluminum pivot screws, mine are definitely not. I can stick a cow magnet to any one of them, meaning they are some sort of carbon steel, probably 400-series stainless.

However, maybe Gerber also made a lower-quality variation? Foolish of them to put their good name on a bad product if this is true.
-
I will not return this tool a second time to Wallmart. I will be sinking it in a 2 ton concrete block that will be a part of a bridge in Southborough Ma. May god have mercy on its soul.
Following your damning reviews on the tool, remind me not to drive over any Southborough bridges!
-
@J-sews said:
Tom, you may have hit upon the answer there. While I do not doubt that both of Hawkchucker's Suspensions had aluminum pivot screws, mine are definitely not. I can stick a cow magnet to any one of them, meaning they are some sort of carbon steel, probably 400-series stainless.
This matches my results from checking out two different Suspensions, my own and one belonging to a friend.
Both Suspensions came from the local Lowes, both are all stainless steel including the pivots, and both have absolutely no aluminum in them that I can find.
I checked all parts using first a magnet, and second by scratching each part with a steel blade and then with a carbide drill. Hard steel will scratch aluminum fairly easily, but not other steel. A carbide drill will scratch steel similar to steel scratching aluminum.
@J-sews said:
However, maybe Gerber also made a lower-quality variation? Foolish of them to put their good name on a bad product if this is true.I agree 100% with this observation! I don't know why Gerber would do this, but I'm guessing it isn't intentional. I'd bet it's due to lack of oversight of Quality at the Chinese factory that produced it.
Pivots would be about the worst possible place for the manufacturer to cheap out and use aluminum, due to the stress the pivots routinely experience.
Aluminum handles or aluminum scales are perhaps acceptable on a multi, although I don't really care for them. But, aluminum pivot pins are totally unacceptable.
After several months of using my Suspension around the house and out in the yard, I still like it.
It's accomplished a fair amount of electrical repairs inside the house - replacing outlets, switches and the like. Outdoors it's been used to cut back stray branches, rewire an electric lawnmower, change out the chain on a chainsaw, and too many other tasks to list. It accomplished all of those tasks without ever feeling like it was about to break.
While not a heavy duty tool, I'd judge the Suspension to be somewhat more robust than my old Leatherman PST. However, since it weighs nearly twice as much as the Leatherman, it should be more robust!
It's nowhere near as robust as my SOG Powerlock, but it cost less than half as much. For ergonomics and ease of tool access it beats the SOG handsdown.
For less than 30 bucks and the ability to exchange it at Lowes if it breaks, I still think it ain't a bad deal.
.
-
Yup welcome! even though you carry the tool thah still gives me nightmares

-
@hawkchucker said:
Yup welcome! even though you carry the tool thah still gives me nightmares
:D :D
-
Mike ya know I am going to beat this like a dead Hourse. Oh by the way ya know what tool I dispise?
However I am thrilled it has worked out for EM745. More power to him.
-
I think I can guess mate :D
-
@micky d said:
Welcome to the forum mate :DSo how do you rate the Suspension then ???
Hiya dudes!

Yeah... The Suspension... Honestly? IMHO, it's really hard to beat for the price. I paid $30 USD for mine at K-Mart last Summer (I'm a Canadian who lives near the US border--smack-dab on it, actually).
The close tolerances, the titanium nitride finish, the pliers' ergos, the "no-clump" locking tools, that neato holster... they all belie its low price. As others have stated, the pliers feel as good as "real" ones. Is it as durable/rugged as the LMs and SOGs? Probably not. But then, that's why I splurged and bought myself a Flik recently...... Yes, the FLIK! Lovely little tool. :D Not much bulkier than a Suspension, but man-oh-man, the difference in main blade length is :o . The pliers don't "feel" nearly as good as the Suspension's, but that's to be expected given the vastly different design. Truth be told, I almost went for the ubiquitous LM Wave, but that tool's 5-point rivets (what's LM got against torx heads anyway?? ???) and dinky scissors ::) are deal killers for me. The Flik's Fiscars are veritable aviation snips by comparison.

-
Yep gerber scissors are bloody good aren't they, and like you say for the money it's not a bad little tool :)
-
@micky d said:
Yep gerber scissors are bloody good aren't they, and like you say for the money it's not a bad little tool :)A word about the Suspension's scissors vs the Flik's. The return spring on the Suspension's is WAY stiffer, and the cutting edge is about half the length of the Flik's.
The scissors on the Flik, Diesel and Freehand are top notch among multitools.
-
@micky d said:
Yep gerber scissors are bloody good aren't they, and like you say for the money it's not a bad little tool :)
A word about the Suspension's scissors vs the Flik's. The return spring on the Suspension's are WAY stiffer, and the cutting edge is about half the length of the Flik's.
The scissors on the Flik, Diesel and Freehand are top notch among multitools.
I've got a Diesel and I can honestly say that gerber make the best scissors of any multi manufacturer :)
-
Yup they do, but unfortunatly they put them on some of thier tools that should remain nameless.
-
@hawkchucker said:
Yup they do, but unfortunatly they put them on some of thier tools that should remain nameless.Your not going to let this one go are you mate :D
Ten out of ten for being a tenacious bugger :D
-
yah I know, but mine still bumms me out.
-
@hawkchucker said:
yah I know, but mine still bumms me out.Well I've not got one, but I still don't think it'll be on the shopping list :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login