Gerber Fan Club.
-
I've got Dimes on the way and been intrigued by the grappler too - but that will have to wait. I really liked the Flik's scissors too, but wish they'd shrunk the plier head a bit to allow for better/longer drivers. The locking pawls killed it for me though. Mine didn't work properly and it put me off the model altogether ... and the Freehand.
I have a Octane on the way, and really looking forward to that. I've also found myself looking at the BG Strata too :ahhh :ahhh but I can't even consider that unless I start unloading other stuff first. I'm hoping that's just a passing whim :-\
-
Well I got a Multi-Plier in from 50ft this morning and I got so say I love it.
Sadly I got this one in for a friend and have to pass it on. :-\ In fact I'd be tempted to say this one got "lost in the post" if I didn't know this meant a lot to him.
;) His got stolen a good few years ago and he's never found anything he liked more so is over the moon that this is coming to him. :)



Even with just playing with it for half a day I can easily see how this tool earned to reputation as a palm pincher. :o The build quality is excellent though and I really like the blunt nose pliers so I'm definitely going to keep an eye open for one for myself. :)
-
I must admit it took quite a while for me to decide to sell it mate. It's rugged and well built, good tool choices, an awl that screams "step aside I'm coming through", a nicely done finish that's just starting to wear itself in, a proper plain edged blade and serrated blade - no combo nonsense .... but when those handles get you it bloody HURTS!!! :ahhh :ahhh :ahhh

-
-
Nice!
That is an early model you have Gareth, with all button-head screws, and the big pivot nut for the pliers. :) And am I correct in seeing the PATENT PENDING stamping on the blade backspring? -
@J-sews said:
Nice!
That is an early model you have Gareth, with all button-head screws, and the big pivot nut for the pliers. :) And am I correct in seeing the PATENT PENDING stamping on the blade backspring?yes indeed.

@Gareth said:
Dang, how on earth did I miss that was for sale Al..? :ahhh
Read my lips: Do-not-let-it-go-Gareth.!

Sorry mate, but it's already promised to another. Besides, if I kept it it would only end up as a user anyway. :D
-
Nice!
That is an early model you have Gareth, with all button-head screws, and the big pivot nut for the pliers. :) And am I correct in seeing the PATENT PENDING stamping on the blade backspring?yes indeed.

Dang, how on earth did I miss that was for sale Al..? :ahhh
Read my lips: Do-not-let-it-go-Gareth.!

Sorry mate, but it's already promised to another. Besides, if I kept it it would only end up as a user anyway. :D
You're a better man than me Gareth.. ;) >:D
I just really have a thing for those old Gerbers, if you didn't know.. :D :D -
Nice!
That is an early model you have Gareth, with all button-head screws, and the big pivot nut for the pliers. :) And am I correct in seeing the PATENT PENDING stamping on the blade backspring?yes indeed.

Dang, how on earth did I miss that was for sale Al..? :ahhh
Read my lips: Do-not-let-it-go-Gareth.!

Sorry mate, but it's already promised to another. Besides, if I kept it it would only end up as a user anyway. :D
It was certainly born to be a user that one mate - a user for someone with a high pain threshold

Sorry Allan, I have a nasty habit of liberating tools from captivity to let them have a healthy active life :P besides, it never made it to the "listing" stage. The way you and Bob were talking I almost wished I'd kept ... nah who am I kidding ... it HURT! >:D :D :D :D
EDIT: Forgot to add, I've replaced it this end with a MPT from Badwolf, which I'm very happy with

-
I like the MPT- it's kind of the gangly, awkward little brother of the PST forced to live in it's shadow. For some reason I think I associate with it better!

Def
-
Reckon that`s a nice one Gareth. Your friend should really like it.
Here is how it might have looked if it originally came in a clam package. :) -
Cheers for that David.

-
@Gareth said:
Well I finally got my hands on an Octane the other day and have been putting it through it's paces. My thoughts are....mixed. :-\First, the good:
#This is my first MT that I'm actually happy to carry pocket carry with a clip, it's slim enough not to feel bulky in there.
#One of the first combo edges that I like, the serrated section is small and quite aggressive but there is plenty of plain edge to work with.Next, the not so good.
#This has to be the grittiest tool I've ever pulled out of a package, it feels like it was assembled on a beach. A bit of work with some oil on all the moving parts and it's fine, but it's not something I feel I should have needed to do.
#The Phillips was just awful, the angle of the flanges on the head were so obtuse that it just didn't fit in any screws (i.e it just wasn't 'pointy' enough). I'm confident that this was a factory error with my particular tool and not a design defect, I also managed to get it into working order with a diamond stone, but again there's no reason I should have had to do this myself. The small screwdriver was also so heavily ground that it was an awl rather than a 'driver, and the large 'driver was too thick to fit in anything reasonable. All sorted now, but problems with all three screwdrivers? :(Hopefully this has been a Friday afternoon 'special' and isn't a good example, certainly most of the reading I've done about it has been more positive about the screwdrivers than I have been.

Now that it's working I'm OK with it, but the work I had to do has possibly coloured my opinion into something more negative than it really deserves.
My Octane landed today, and it's pretty much as yours Gareth. It's going to need a little refining but I think this will be a winner when it's done. I also agree with your thoughts on the CE blade
I also (because it's spoken about quite a bit on here) paid attention to the "premature deployment" issue a few folks have had. On mine at least the pliers seem happy to reside in the body of the tool, and a good flick is needed for them to appear, but a couple of times I have noticed the action of drawing the tool from the pocket has deployed them, as if the toggles caught on the seam of my pocket rather than the plier heads sliding out in my pocket itself
The pliers themselves are a little stiff too, but I'm sure they'll free up a bit after some use. Now it's time to ponder the scissors issue though

-
I've had some problems with 'premature deployment" :-[ (oo-errrr....) but it doesn't happen all the time.
Certainly I've caught it on my pocket as you describe and I've no issue with that, but I've definitely had it work it's way nearly open when it my pocket. -
After some testing I can now say the Octane's bottle opener is brilliant!!! Almost worth buying the tool for on it's own. Oh, hang on ... I did :P
-
Those early Gerbers are very cool & you do not see many BO versions 8) 8) 8).
My Octane is a shocker for deploying the pliers when using the pocket clip & having the whole thing open in my pocket ??? ??? , I got around it by using a releasable cable tie around the handles , I LOVE reusable cable ties , bloody handy. My only other gripe with my Octane was the linner lock does seem a little springy when the blade is locked

-
I love the bottle opener on the Octane, and I'm surprised that design hasn't been incorporated into more models. It allows the design to save space inside that could be used to house another tool. I like the fact that it takes no extra space and doesn't get in the way, plus it's always accessible.
Def
-
The bottle opener is indeed excellent.
I have to say that, despite all bad press, my Octane actually has a very tight lock-up. OK, it's not exactly a Chris Reeve frame lock, but it locks nicely in place with only the tiniest bit of lateral play. :) -
Just got in my MP450. I have to say it's generally very nice though the tools are all quite a bit tighter than the one's on my (well used) MP400. Much nicer than the gritty pivots that I got on my Octane and just a tiny drop of oil will see them right I think.

Stealing one of Dunc's pics for a second; my older MP400 has a blade shaped like the one on the right, the newer MP450 has a blade shaped like the one on the left.

Gotta say my first impressions are that I like the older shape more, but time will tell if I'm being unfair.Oddly, though the only difference between the 450 and 400 is that one has a file and the other scissors, the components are in really quite a different order.
I'd try and explain but I think I'll take some shots later and just show you, it'll be a lot clearing in the long run. :D -
Yeah, I was a bit confused by the MP450 as well Gareth. Its a great tool and all, but there's not enough differences between it and a 400 to justify its own "450" label IMO.
They should have just called it an MP400B or MP400.1 or something like that.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login