Tofty's Custom Brass Torches
-
That's beautiful Tofty

-
@sparky415 said:
That's beautiful Tofty
+1

-
Amazing craftmanship Tofty..

-
Brilliant work (pun intended ;) )

I know it would result in a chunkier torch but seeing the end of MKII makes me think a torch with a triangular cross section would be fun.
-
It's an idea certainly,
It would be a deal more complicated but would make an interesting feature for torches that use a 3xAAA configuration like the maglite xl100. The joins would be the really hard part unless round end sections were used but that would defeat the point. -
I said so in the other thread, but I'll say it again here: Outstanding machine work there sir!
You've really outdone yourself yet again. Congrats on a stunning torch, and thanks for the generous giveaway! 
A question though (perhaps already discussed previously in this thread..?) What will you do to prevent the brass from tarnishing? I love the shiny gold color of freshly cut brass, but after just a bit of handling, it always turns a dull dark brown. :( The only thing that I've tried that seems to prevent this is a coat or two of clear enamel spray paint, but the downside there is that the paint doesn't seem very robust, and tends to come off with rough handling, thereby exposing the raw brass again.
Have you had any better luck than me? -
I hadn't really considered any way of keeping brass from tarnishing, in fact it's the fact that it does tarnish in the way that it does that attracts me to it.
In 50 years this torch might look weathered, stained, tarnished and corroded but will still be in as good a working order as when it was made (ignoring the inevitable failure of the led).
I like the fact that it Looks used.
If i want a material that will not change over time i would go for stainless or titanium, or if i really want to spend money i could try and source some of the more corrosion resistant bronze alloys like alu-bronze.I wouldn't consider coating items because as you say the coating is not durable enough and it will wear unevenly exposing bare metal in patches leading to an uglier surface than natural tarnishing.
Another reason why i haven't considered surface protection is that whenever i feel i want to clean something up i can clamp it in the lathe and spin it up with some brasso, takes a couple of minutes.
Not really a useful solution for most people but there you go. -
Ahh, I hear you there.
Yes, I suppose that is the best approach to take. :) Again, lovely machine work sir. 
-
I agree with everyone else- that is some excellent work there, and kudos for sharing it with everyone!
Def
-
Really impressive. Wonder what the MKIII will look like?
-
@muddysuki said:
Really impressive. Wonder what the MKIII will look like?Oops, i mean the MKIV
-
Yes you do you big numpty, cheers anyway.
Mark IV may well end up using a different lens, reflector, led/driver and battery type but apart from that it will be the linear progression of the original concept (being made of brass). -
I just re-read your photo captions from earlier in this thread....you made your own tap?! :o Wowwwwwww.

-
Well here it is, version 2.0, the forth iteration of my brass torch experiment.

(this one ended up taking 22 hours to render)
(this one took less than an hour and a half to render as it doesn't show the lens)It uses a cree XM-L on a 14mm MCPCB passing through a carclo 10003 20mm TIR lens.
The driver is a 3 mode, 2.8A, 8xAMC7135 unit running off either a single CR123, RCR123 or 16340 battery.
The main head has a solid core between the light engine and the driver for improved heat dissipation with the finning further reducing the problem.
The tail contains a forward mcclicky switch which is shielded from accidental operation.
The components that are usually threaded onto the main body are mostly secured with small M2 countersunk screws.If a moderator could change the title of this thread to "Tofty's Custom Brass Torches" i would really appreciate it.
-
that's one heck of an impressive project mate.
Title change done. :) -
Aiiiiii

-
I'd forever have a toothbrush on it between those fins :P
I'm sure it'll be lovely :D
-
@Tofty said:
Well here it is, version 2.0, the forth iteration of my brass torch experiment.It uses a cree XM-L on a 14mm MCPCB passing through a carclo 10003 20mm TIR lens.
The driver is a 3 mode,** 2.8A, 8xAMC7135 unit running off either a single CR123, RCR123 or 16340 battery**.2.8A from a CR123 ?
-
Yeah alright, not with a CR123 then just the rechargeables, and i doubt it will reach 2.8A, it's just the driver i chose. https://illuminationsupply.com/8xamc7135-28a-selectable-mode-driver-p-45.html.
I could of course make an extra middle section to allow it to use two CR123s and run closer to it's maximum but does it need it? i just designed it to look pretty, if light comes out one end then it's a bonus. -
WOW!! :o That rendering is spectacular Toft!
Can't wait to see the real thing in the flesh :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login