New for 1992
-
Being on a Multi-Plier kick ATM I went a searching for some info on the forum. It's likely no big surprise that it was Bob who had already come up with the goods.
I remember reading this thread when it was new and actually thought I'd already posted on it, but it seems I didn't.
So I'll offer a very belated: thanks for the info Bob. 
-
Cheers Gareth!

Coincidentally, I just happen to be doing a little spit and polish on an old Multi-Plier this morning.
The tool itself doesn't appear to have been used much, but someone ran her hard and put her away wet.
There was rust blobs and sand on all the internal surfaces. No way to clean that up from the outside, so a complete tear down was the first order of business.(of course, this not being my first multitool dissection, I made sure to snap a picture of the blade arrangement in both handles before taking it apart)


A look inside the handle channels. Plenty of rust and sand, the evil twin demons of multitools everywhere.


It was a bit of a struggle overcoming the 20-year old locktite on all the screws, but I finally got it apart!


A close-up of this earliest style Gerber plier head, complete with massive pivot nut. Unfortunately I did not have a pin spanner wrench the right size, or I would have taken it apart too.

Grant's favorite Multi-Plier implement of all, the massively oversize lanyard attachment


After lots of elbow grease, along with a generous helping of mini-wire-wheel-and-Dremel, then a touch of Rem Oil, this old girl is (almost) as good as new.


-
Great pics mate.
What are those old scissor like? Do they perhaps pre-date the Fiskars buy out of Gerber?Oddly enough I was just having a look at my PM600 and wishing they'd given me anything other than one of those over-sized lanyard attachments. ::) I do wish I'd been into MT's when Gerber were doing their 'design your own' service.

-
Those first scissors are perhaps the worst ones ever found on a multitool Gareth
I'm not sure when Fiskars acquired Gerber.
I do know that after this first Multi-Plier, Gerber waited many years (until the MP600 Pro Scout model came out around 2000) before offering scissors on a multitool again. 
-
So, as a user, you'd not recommend them eh?

-
-
-
-
@Grant Lamontagne said:
Really enjoyed those photos Bob
8). Ya gotta love digital cameras, very handy for reassembly purposes ::)
:D.I cam just imagine Bob ten years ago having to wait a week for the photos to develop so he could re assemble a tool!

Def
Ten years ago (before my early alzheimers set in) I didn't need the photos

-
I'm not sure it was Alzheimers, it was probably joining Multitool.org that started the mental deterioration!

Def
-
@Grant Lamontagne said:
I'm not sure it was Alzheimers, it was probably joining Multitool.org that started the mental deterioration!
Def
Or was it my mental derangement that led me to join Multitool.org?

Sounds like another one of those chicken-or-the-egg questions

-
Dinosaurs and insects were laying eggs long before anything even remotely resembling a chicken existed.
You know, just in case you were wondering....
Def
-
-
-
At the time Fiskars probably hadn't planned to include their scissors into Gerber tools. They were probably more interested in the knife side of things since there really wasn't much of a multitool market at the time. I imagine many multitools being released at the time were low cost, low development budget offerings to test the waters on a new fad.
Def
-
@glorn said:
If I suggested that I got mine around 92 or maybe 93 would that sound impossible?I would guess 1992-93 would probably be correct. My company made quite a few Multi-plier parts for Gerber before I sold them the equipment to machine the jaws and set it up in a small shop for Gerber to run before they took it in house which I believe was sometime in 1995. As for the sissors you everyone is correct they looked like something that would be on a Fisher Price toy. For that we built the little SS stud that was ment to hold the spring in the sissor spring in. Somone took pictures where they took one apart for cleaning but I did not see the stud. Almost all the jaws we machined for them was made out of SS stampings. Parts had a hole punched where the part would fit together at final fit and the part was left for lots of machineing completely around the outside edges. Wire cuter had to be machined as well as all serrations in pliers, all screw holes had to be drilled and tapped. Spring button holes had to be drilled and reamed. Blade rivets were run on a screw machine, tapped on one end, parted off and other end taped and champered in second opt. I believe the sissors and awl was rotated in production when they did not have the sissors figured out. Like most have posted the sissors would probably have been better left out. We also machined the pillips part of the phillips screw driver. Like I stated earlier I think Gerber took job in house in 1995. During our time of production we ran 24/7. At the same time they had other companines making jaws out of Forgings and Castings. I can tell you that it took thousands of 6-32 taps to tap that many stainless holes. After almost 20 years I do not remember the exact alloy but I am sure it was some 400 series. I am not sure anyone will read this post because this form is old but in case I though I would ass my .02. It brings back some interesting memories.
-
If I suggested that I got mine around 92 or maybe 93 would that sound impossible?
I would guess 1992-93 would probably be correct. My company made quite a few Multi-plier parts for Gerber before I sold them the equipment to machine the jaws and set it up in a small shop for Gerber to run before they took it in house which I believe was sometime in 1995. As for the sissors you everyone is correct they looked like something that would be on a Fisher Price toy. For that we built the little SS stud that was ment to hold the spring in the sissor spring in. Somone took pictures where they took one apart for cleaning but I did not see the stud. Almost all the jaws we machined for them was made out of SS stampings. Parts had a hole punched where the part would fit together at final fit and the part was left for lots of machineing completely around the outside edges. Wire cuter had to be machined as well as all serrations in pliers, all screw holes had to be drilled and tapped. Spring button holes had to be drilled and reamed. Blade rivets were run on a screw machine, tapped on one end, parted off and other end taped and champered in second opt. I believe the sissors and awl was rotated in production when they did not have the sissors figured out. Like most have posted the sissors would probably have been better left out. We also machined the pillips part of the phillips screw driver. Like I stated earlier I think Gerber took job in house in 1995. During our time of production we ran 24/7. At the same time they had other companines making jaws out of Forgings and Castings. I can tell you that it took thousands of 6-32 taps to tap that many stainless holes. After almost 20 years I do not remember the exact alloy but I am sure it was some 400 series. I am not sure anyone will read this post because this form is old but in case I though I would ass my .02. It brings back some interesting memories.
lone,
That's a great story! I love learning the history behind these tools. My brother worked at a casting company in CT in that time period that cast the prototype pliers heads for the Leatherman Juice (at a newly built Mexican plant ::))
Fascinating stuff!
-
-
VERY cool story and info.
-
and for th 200,000th time...i never knew this thread even existed! cheers to all
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login