What's your latest flashlight?
-
@dks said:
Heinz, I have now ordered a Panasonic 18650, protected, just to get the best performance out of my torch. I posted some current readings too, in my LIDL light thread.
Thanks for the info; I'll check it out. I've been wanting to try some other brands of cells. I know that most of the high end 18650 makers like RediLast and AW use the Panasonic core but have their own PCB's and protection circuits in them. I'm going to need at least two more soon, as I'm planning on getting a Solarforce L2P and a neutral or warm XML module as well. I'd love to get one of the Nailbender ones, but I've heard that ThruNite makes some nice 3 mode warm XML modules, as does Dereelight.
Either way, my next lighting puchase is going to be a Solarforce LT1 lantern head attachment. My wife and I are going to do a short camping trip with our kids over spring break in two weeks, so I want to have the LT1 for that trip.
-
I picked up an ITP SA2 Eluma recently for work. I love it, but the lowest setting(said to be 6 lumens) is a retarted setting for a 2AA flashlight. Waste of a setting if you ask me.
What i do like about it is everything else. It has a medium and high of 42(or so) lumens and 230 lumens respectively, with a side mounted selector switch, memory(so you can leave it on one setting), and an infinite beam adjuster built in to the switch.
It also comes with a ridiculously flimsy belt sheath that was soon replaced by my Bianchi Accumolt holster(with modification for lenghth) and a complete tail switch innards replacement.
-
@Mercury said:
I picked up an ITP SA2 Eluma recently for work. I love it, but the lowest setting(said to be 6 lumens) is a retarted setting for a 2AA flashlight. Waste of a setting if you ask me.What i do like about it is everything else. It has a medium and high of 42(or so) lumens and 230 lumens respectively, with a side mounted selector switch, memory(so you can leave it on one setting), and an infinite beam adjuster built in to the switch.
It also comes with a ridiculously flimsy belt sheath that was soon replaced by my Bianchi Accumolt holster(with modification for lenghth) and a complete tail switch innards replacement.
I love my SA2 as well. It's just a shame they're not being made any more (or so I understand) as the iTP brand is gone and there's no Olight equivalent on the cards. :-\
-
i use a led lenser P7 at home and a T5 at work.

-
I picked up an ITP SA2 Eluma recently for work. I love it, but the lowest setting(said to be 6 lumens) is a retarted setting for a 2AA flashlight. Waste of a setting if you ask me.
What i do like about it is everything else. It has a medium and high of 42(or so) lumens and 230 lumens respectively, with a side mounted selector switch, memory(so you can leave it on one setting), and an infinite beam adjuster built in to the switch.
It also comes with a ridiculously flimsy belt sheath that was soon replaced by my Bianchi Accumolt holster(with modification for lenghth) and a complete tail switch innards replacement.
I love my SA2 as well. It's just a shame they're not being made any more (or so I understand) as the iTP brand is gone and there's no Olight equivalent on the cards. :-\
I didn't realize ITP was gone! I love their stuff. Depending on how long this SA2 lasts I may have to pick up another before they get rare.
-
Isn't itp just a side brand set up by another flashlight company? Nitecore or somebody else.
-
I read ??? ITP was part owned/bought by olight who was making all its torches and branding them as itp anyway.
They then decided to get rid of the *itp * brand as a whole and just put the olight brand on the torches they were making and selling as itp..
Doesn't anybody else lurk in CPF and Budjetlights ?? :D
-
I make a point to avoid CPF for the most part...
-
I make a point to avoid CPF for the most part...
why?? ???
:D
I did post a thread from CPF in the "Hijacking death" thread a few days back that makes interesting reading..
Me too (avoid the place that is).
I find CPF inconsistent and no longer the friendly place it once was.
Here, if you ask a question that has already been asked, or post in the incorrect section, its ok. Over at CPF, sometimes its ok, sometimes other members jump on you, and sometimes the mods jump on you.
-
I make a point to avoid CPF for the most part...
why?? ???
:D
I did post a thread from CPF in the "Hijacking death" thread a few days back that makes interesting reading..
Me too (avoid the place that is).
I find CPF inconsistent and no longer the friendly place it once was.
Here, if you ask a question that has already been asked, or post in the incorrect section, its ok. Over at CPF, sometimes its ok, sometimes other members jump on you, and sometimes the mods jump on you.
Exactly. CPF is just not my type of place, they used to be though. Same with EDCF. I used to love that place but now I don't.
-
Purchased the Sunwayman L10A last week. I am really enjoying the form factor. Great heatsinking and a constant current driver should produce good runtimes.

I joined CPF in 2001 and left very shortly after the original owner's on-line melt down. Early CPF was a fun and unique place.
-
The single biggest problem with CPF is they don't tolerate any negative comments about their advertisers.
I got banned for two weeks for posting that four of the five 4Sevens neutral white lights I've bought from them in the past two years were all green, and that I didn't think they were putting any effort into QC on the tints of their emitters.
I still occasionally read through a few threads there, and make a short post once in a while, but I've pretty much given up on the place. They're smurf smurfing smurf mongers and they can go smurf themselves for all I care.
I make a point to avoid CPF for the most part...
why?? ???
:D
I did post a thread from CPF in the "Hijacking death" thread a few days back that makes interesting reading..
Me too (avoid the place that is).
I find CPF inconsistent and no longer the friendly place it once was.
Here, if you ask a question that has already been asked, or post in the incorrect section, its ok. Over at CPF, sometimes its ok, sometimes other members jump on you, and sometimes the mods jump on you.
Exactly. CPF is just not my type of place, they used to be though. Same with EDCF. I used to love that place but now I don't.
-
I have seen the effects of their comment censoring, though I wasn't the one being censored. I have maybe posted twice over there, but I have lurked and read through their archives quite a bit in the past and was always put off by both the advertisement pandering and the general attitude.
I know we didn't start a thread on EDCF, but man they have gotten weird lately. Very stiff feeling.
It all makes me grateful that MTO is here and is the way it is. It's a rare thing.
-
@Sam Quint said:
I joined CPF in 2001 and left very shortly after the original owner's on-line melt down. Early CPF was a fun and unique place.
We need to look after Grant
, otherwise the moderators will take over!!!! :ahhh
:D
I have read CPF and Budgetlightforum a lot lately, just learning some things; though I am not a member in any of them.
Budgetlightforum is smaller and seems more relaxed, though they tend to complain about CPF a lot but still provide links to topics in it when they need too.. CPF appears more like BF in a way, where emphasis is given on having expensive US made equipment and supporting advertisers...
Budgetlightforum accepts users of cheaper, non US lights more and you do not get the standard "save your money and buy this xxxx expensive US made light" answer you usually get when asking about any cheaper torch...I posted this unusual CPF thread elsewhere here but here it is again:
http://www.candlepowerforums.com/vb/showthread.php?332544-ExtremeBeam-do-they-claim-way-too-much
I was quite surprised by what was considered acceptable and what unacceptable...As I said I do read them and get what I need from the forums...
-
@Sam Quint said:
I joined CPF in 2001 and left very shortly after the original owner's on-line melt down. Early CPF was a fun and unique place.
We need to look after Grant
, otherwise the moderators will take over!!!! :ahhh
:D
MTO is a oasis! This is one of perhaps five sites that I frequent anymore. And the only one that relates to EDC gear. I found SO many gear forums to be redundant, predictable and very boring. If you don't own this latest and greatest XYZ gear you won't survive the upcoming Zombie a-pork-a-lips and- if I use my EDC it won't be pretty any more -crowds. ???
-
@Sam Quint said:
I joined CPF in 2001 and left very shortly after the original owner's on-line melt down. Early CPF was a fun and unique place.
We need to look after Grant
, otherwise the moderators will take over!!!! :ahhh
:D
I have read CPF and Budgetlightforum a lot lately, just learning some things; though I am not a member in any of them.
Budgetlightforum is smaller and seems more relaxed, though they tend to complain about CPF a lot but still provide links to topics in it when they need too.. CPF appears more like BF in a way, where emphasis is given on having expensive US made equipment and supporting advertisers...
Budgetlightforum accepts users of cheaper, non US lights more and you do not get the standard "save your money and buy this xxxx expensive US made light" answer you usually get when asking about any cheaper torch...I posted this unusual CPF thread elsewhere here but here it is again:
http://www.candlepowerforums.com/vb/showthread.php?332544-ExtremeBeam-do-they-claim-way-too-much
I was quite surprised by what was considered acceptable and what unacceptable...As I said I do read them and get what I need from the forums...

-
One thing I do respect about Jon over at EDCF, is that when he and Maxpedition got into their tiff, Jon didn't put any pressure on the members to stop buying or fully reviewing Maxped products. He made his opinions clear but that's all.
I know I'm kinda the only one talking about EDCF, but I wanted to leave it on a positive note!
-
@Mercury said:
One thing I do respect about Jon over at EDCF, is that when he and Maxpedition got into their tiff, Jon didn't put any pressure on the members to stop buying or fully reviewing Maxped products. He made his opinions clear but that's all.I know I'm kinda the only one talking about EDCF, but I wanted to leave it on a positive note!
I agree with your earlier comments about there being a "stiff" feeling at EDCF. My experience is that unless you're part of their clique anything you might post will just be ignored or simply deleted. The vast majority of posts there don't seem to be very helpful, in other words, when someone posts asking for info or with a question, there never seems to be any straight answer given.
-
There is a whole lotta "You should have looked here before posting" crap.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login