Kershaw Select Fire
-
@Stormdrane said:
Nifty looking knife/tool 8). Any idea on how much torque the screwdriver can handle?...
I've given it a hefty twist without any detrimental effects. It seems pretty strong.
@Grant Lamontagne said:
You could get the person you buy it from to tighten the pivot somewhat before sending it.For the record, I just tried the bottle opener and while it worked well enough it was a little awkward.
Def
Be careful with that. If it's so tight it can't be opened at all, customs have the right to loosen the pivot. They will then, of course, loosen it to the point that it will fail the test.
It needs to be tight enough it won't budge while they fling it like monkey poo, but not so tight it can't be opened with two hands. A delicate balance is needed.
-
I was just looking around the interwebs, and realised someone should do a side by side comparison of the Select Fire and the Leatherman E55B. Should be a fairly close match.
I'm not investing $100 in buying one locally (yes, Leatherman in Australia is stupidly expensive - that's the cheapest price I could find) and I'm not running the customs gauntlet, and it might be a multitool, but it looks like a knife and I'm sure they'd very kindly throw it in the bin for me...
-
@mvyrmnd said:
I was just looking around the interwebs, and realised someone should do a side by side comparison of the Select Fire and the Leatherman E55B. Should be a fairly close match.I'm not investing $100 in buying one locally (yes, Leatherman in Australia is stupidly expensive - that's the cheapest price I could find) and I'm not running the customs gauntlet, and it might be a multitool, but it looks like a knife and I'm sure they'd very kindly throw it in the bin for me...
It's on my list of projects, but I'm pretty sure someone did something similar recently.
Def
-
I got one. Like it except for one wee small problem. I've got little hands. Yes, yes, I have small hands for a guy- just like T Rex did. :) It wasn't super comfortable for me to use as a knife, but it has found a home in my range box.
-
Bits: yes they are made of some kind of reinforced chalk. Replace them. I did that for the one just sold to a member.
As for the torque question... So far so good. Because of the increased reach, angles and grip you are able to get a lot more torque with less effort. For that reason i'm being careful until I know the tool better.
So far its a fantastic tool. I prefer my black model with plain edge.
-
I haven't had any issues with the stock bits. I use the #2 Phillips daily for various tasks and it's showing no significant wear...
-
Reinforced chalk huh? I've had bits like that in the past!
The screwdriver bits on my Select Fire don't seem all that bad, but then I haven't yet used them for much so I really can't say. So far there's more reinforcement than chalk though so I guess I'm doing ok! :D
Def
-
I exagerated ;)
-
Yes I know.... but what a fun exaggeration! :D
Def
-
I think Scattergun got the one i sent today.
-
It'll be interesting to see if he likes it any more than you do.
Def
-
I did get it today and thank you very much. This tool is the perfect compliment to the others that I EDC in a Maxped "Fatty". It seems durable enough and I appreciate that you upgraded the bits for me. Overall I'm very pleased with the tool and the transaction as I have been with every other transaction I've done on this site.
It's good to be a part of a community that still adheres to an unwritten code of honest business, now if the government would just do the same.
Thanks again Accujohn,
Stew and K9 partner Ajo... -
@mvyrmnd said:
I was just looking around the interwebs, and realised someone should do a side by side comparison of the Select Fire and the Leatherman E55B. Should be a fairly close match.I'm not investing $100 in buying one locally (yes, Leatherman in Australia is stupidly expensive - that's the cheapest price I could find) and I'm not running the customs gauntlet, and it might be a multitool, but it looks like a knife and I'm sure they'd very kindly throw it in the bin for me...
Just got my selectfire today! I really like it so far. Later this weekend I'll do a selectfire vs e55bx shootout.

Stay multi my friends
-
I got one of these at Walmart around Christmas last year for $10. The design is interesting and the drivers work pretty well. I'd say it's about as much knife as I've ever gotten for that price.
-
I finally got one too, and it looks/feels decent enough, but I'm kinda bummed that it's not paracord lanyard friendly, lol...

-
Same here Storm. No lanyard.
Sent from Ash forum mobile
-
I had a select fire for about a month before I sold it.
It was to heavy and I couldn't get used to the tip down clip.
It did seem like a quality tool it just wasn't for me.
-
@Stormdrane said:
I finally got one too, and it looks/feels decent enough, but I'm kinda bummed that it's not paracord lanyard friendly, lol...
What?!?! I've seen your work, I thought you could put a lanyard on anything!! :D
-
I finally got one too, and it looks/feels decent enough, but I'm kinda bummed that it's not paracord lanyard friendly, lol...

What?!?! I've seen your work, I thought you could put a lanyard on anything!! :D
I have tied a simple lanyard onto the Kershaw Select Fire's pocket clip, with the other adjustable end looped onto a belt loop, running the belt through the loop, or around the wrist if needed... :)





-
Those are nice pics, there Stormdrane.
This is officially the first tool ijust bought because of a thread here, so i think i have to say thanks for some more money spent and some more strange looks from her. ;)
I´m not yet sure if this is a good team buddy for a plier based tool for those moments where you need to hold a nut and turn a screw or just to bulky t carry alongside a Multi.
Price was a whloe lot more than 10 $, as most Multi/Knife brands seem to add a premium here in germany.
I´ve bought the black plain edged variant. Fit and finish seems good enough, me thinks.
And a thought for the modders around:
What if you removed teh 2 bolts at the tail, opened up teh holes enough for a lanyard hole and do new holes and threads for teh screws at the little hump , about in an axis with the swiveling point of teh bit holders? That way the handles should stay firm and you could use a lanyard. It would be close to the edges tip, but on mine it looks ok to enlargen teh holes a bit.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login