Gerber Flik?
-
Look forward to seeing the pictures mate :)
And it look as though you got a good price on it to!
-
Well, here are my Flik-pics. For comparison, many of these are with everyone's favorite whipping boy, the Suspension.





Flik on the left.

Again, Flik on the left.


This one makes me laugh for some reason. :D

The Flik's Wharncliffe is VERY pointy!




The Flik's holster, while certainly not cheaply made, lacks the Suspension's "hard molded" fabrication and horizontal loops.


-
Now that is a fine looking tool

Thanks for the pictures mate, and yeah the suspention's saw doesn't look to well endowed does it ;) :D
-
The man knows what he's talking about- I am also the proud owner of a new Gerber Flik!
I'll put up a full review in a few days, but one interesting thing on the package that I thought was noteworthy is a small tag that says:
"TOOL AND SHEATH MADE IN CHINA
JAWS MADE IN TAIWAN"So far it seems to be on par with the MP600 (more or less) but time will tell.
Def
-
I'll be looking forward to the review of that one mate :)
-
Hadn't realised all the tools were outside opening (i'm a bit slow sometimes!) It looks a very nice tool though, although the drivers do look a little suspicious, wonder if MP400/600 drivers could be transplanted into it?
Roadie
-
I think Bob hit the nail on the head in his mention of it from the SHOT Show- the pliers seem done well, but the screwdrivers are microscopic, a common problem amongst Gerbers. The good news is that all of the implements are accessible from the outside, and they also all lock. The only thing you have to open the pliers for is... the pliers!
The double lock/non hand pinching mechanism takes a little getting used to though. I'll probably have to do a video on that because it's a little hard to describe, even in pictures....
I have an MP600 sitting here next to the Flik and I'd say I doubt such a surgery would be possible since (believe it or not!) the MP600's implements are somewhat larger than the Flik's!
Def
-
Is it the width thats the problem or the length of them? (or the depth, or the hole diameter.....) Width shouldn't be too much of a problem (just sacrifice a couple of drivers for one) What type of fasteners are used on the Flik, they look like torx?
-
They are indeed Torx- the problem is the length. I'll try to get some pictures to illustrate what I mean, but the tools are packed in pretty tightly- there isn't more than 1mm between the end of the implements and the base of the lock mechanism. I'd say you could maybe stretch that by 1 or even 2mm without messing up the lock, but there is a brace for the frame underneath it. You would need at least 3mm more space to add in the tools from the MP600, and that's assuming everything else is even.
Def
-
@Defender said:
They are indeed Torx- the problem is the length. I'll try to get some pictures to illustrate what I mean, but the tools are packed in pretty tightly- there isn't more than 1mm between the end of the implements and the base of the lock mechanism. I'd say you could maybe stretch that by 1 or even 2mm without messing up the lock, but there is a brace for the frame underneath it. You would need at least 3mm more space to add in the tools from the MP600, and that's assuming everything else is even.Def
I think if there was any possibility those litle driver would not be there because Gerber would have used the ready designed ones! They look to be the same as the Freeman ones if not a little shorter. Now if you had a Freehand to compare with it, that could prove interesting.
Dave
-

EDITED
Forgot to check the Freehand's length. It's almost an inch longer than the Flik. :o
Forget I said anything.

-
Are they? Or do they just appear that way since the Freehand is a much larger tool?
Def
-
It looked cool while it lasted though :)
-
Wow after really looking at the picks closer. I dont like the saw and the tools are well kinda flimsy looking. However I still like the blade! Its about time to have a warncliff blade with substance! However I might just go to the freehand and get a bigger blade.
-
Thanks for the pics EM745!
I'm liking the Flik the more I see of it. Can't wait to try out that saw, the point looks like it will be good for popping holes in sheetrock.
They really need to pop a file in there instead of the serrated blade, make it more full-featured. Although it's nice to not have a ruler on it.
-
I'd of prefered a file too ::), it would make for a more versatile tool.
-
Great pics EM745. Thanks for taking the time to show us. :)
-
@hawkchucker said:
Wow after really looking at the picks closer. I dont like the saw and the tools are well kinda flimsy looking. However I still like the blade! Its about time to have a warncliff blade with substance! However I might just go to the freehand and get a bigger blade.The Freehand is a lot heavier. There will be nothing 'flimsy' with the steel on the tools. They may be short but once you use the bit adapter on the philips you have a very usable screw driver that can have any bit (rubber holder holds 9) in use one handed.
The good thing about that head design is you hold the upper arm (either one) and give it a flick, the head slides down and the weight of the tools open the other arm into the working position. Stretch your fingers down to get the loose arm and the tool is ready to work. Very fast.
I agree with others that a file would have been better than the saw but I have MP600 with the saw adapter so any type of dedicated saw I do not really need. Mainly use fine tooth metal saws anyhow any wood cutting I use an electric.Dave
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login