Suspension hater video
-
@Roadie said:
Yup the 600 series (and 400) are both excellent tools. Gerber do seem able to produce some fantastic tools, and then some utter crap. I'd prefer it if they didn't make some of the poorer tools in their catalogue as it sullies their name but as long as they continue making the good stuff i don't really mind, i just won't buy the poor ones!It would be nice if Gerber would package and market their tools similar to Benchmade or Spyderco/Byrd...a premium line,and an economy line. -
Thats not a bad idea Bob mate :)
-
They used to... Winchester used to be the cheap line of Gerbers, and they may still be, but I haven't heard anything form them lately. Of course that's taking a page from the book of United Craplery and Taylor- the Winchester name is quite reliable for long guns, and a well respected old American company being cheapened by crappy Chinese made tools cranked out by discount 5 year olds....
Def
-
Winchester tools really are quite bad, i've had a few given me over the years and they all pale in comparison to Gerber tools (that i've used, not handled any of the new "suscruxtresolve" tools)
-
I have one, and trust me, that's more than enough. While I may have a slight interest in some cheap pieces of crap, the Winchester line is well and truly beneath even me...
Def
-
I had one of there slippies for a while, that was a true POS >:(
-
@micky d said:
@micky d said:
Are all your tools that clean Eddie or do you have a magic camera ???
They are both really clean. :o Do they not see a lot of use?
He's just got a good cleaning regime, you'd need it considering how humid it is the phillipeans :o
Thanks!
Considering the very high cost of USA made tools here I take very good care of them. They're not shelf queens, they take their turn as EDC.
Eddie
-
I was actually given a Winchester tool as a thank you for playing santa this winter. It still is in the package, and will most likely be felled to that lonly position in the tackel box. Ya know the tool that sits there in filth and rust unused until you clean out the box in the fall and chuck it out.
-
@hawkchucker said:
I was actually given a Winchester tool as a thank you for playing santa this winter. It still is in the package, and will most likely be felled to that lonly position in the tackel box. Ya know the tool that sits there in filth and rust unused until you clean out the box in the fall and chuck it out.I think we've all got junkers like that ::)
-
The video guy is kind of right about the plier head. He points to the parting line in the metal as evidence of the reason it broke. But the Suspension pliers are not zinc or pot metal, they are stainless steel. The parting line is there because of how the plier was created.
It was most likely made using a Metal Injection Molding process, or MIM. High stress parts like plier jaws have no business being made this way. The structure of the metal is actually crystal-like, with no grain, and will fracture easily.
Tools should always be made by forging, a process that any blacksmith is familiar with. Forging actually strengthens the metal. But it costs more to finish-machine a forged part, whereas a part made using the MIM process can be cast to size, with no further machining required.
So even though the Suspension jaws are made from stainless steel, they are still weaker than jaws of forged stainless steel.
-
You also have to remember that there are also a ton of stainless recipies out there.
-
The cost to the end user between a 16mm ring of 316 stainless steel - one forged and one done however they do it cheaply is about $100.
The finished product looks identical to the eye - but one has a breaking load of around 1200kgs and one at around 9000kgs.

Just a ring. Costs as much as a good Multi.
-
Well I have allways gone for the hammer forged tools when possible. However with a lot of companies out there, You never have any idea what you are getting.
-
To be fair though (as much as I lean towards Leatherman and Voctorinox), my new Leatherman tools (both the charge and Core) have casting marks on the pliers.
-
I'm not too sure about that!
-
@Nomad said:
The cost to the end user between a 16mm ring of 316 stainless steel - one forged and one done however they do it cheaply is about $100.The finished product looks identical to the eye - but one has a breaking load of around 1200kgs and one at around 9000kgs.
Just a ring. Costs as much as a good Multi.
$100 for one ring? You gotta be kidding. :o Or are you talking about just making one not mass production?
And 9000kg? That means I can hung my jeep plus three others on ONE of them without it breaking? :o
-
Oh no, it has them for sure. The Core, the Wave, the Charge, and the new Skeletool all have casting marks on the bottom of the pliers.
Am I happy about it? Absolutely not! Who wants to admit that they bought a tool that could potentially be a piece of junk? Nobody. But am I worried about it? No. Theres a 25 year warranty that says I bought a great tool!
Theres nothing inside of the tool that will make it self-destruct a day after the warranty is up.
-
$100 for one ring? You gotta be kidding. Shocked Or are you talking about just making one not mass production?
And 9000kg? That means I can hung my jeep plus three others on ONE of them without it breaking? Shocked
I didn't say $100 for one ring, I said the difference was $100. The Cheap one costs $50 to start with :)
Yes, Mass produced. You can really only hang four jeeps off it on paper
Angles and things have strange effects on actual breaking loads.
-
Aren't these lines just from the two halves of the forging press ?
I have a set of Knipex pliers, one of the world's best manufactuers, and an almost impeccable reputation, but it also has lines on the handles which look like mold lines, but I imagine it's from the forging process. -
@appletree_man said:
Aren't these lines just from the two halves of the forging press ?
I have a set of Knipex pliers, one of the world's best manufactuers, and an almost impeccable reputation, but it also has lines on the handles which look like mold lines, but I imagine it's from the forging process.Hopefully Bob will be along soon with the answer for us. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login