Want a Skinth but don't know which one?
-
In an effort to help those who are on the edge of purchasing a Skinth sheath, but aren't sure which one to get, I thought it may be helpful to see the loads that others have been using a Skinth for. I started a similar thread on the EDCForums, nut as many folks were still awaiting the arrivals of their Skinth, most of the comments didn't include pics.
I know that Metropolicity has a full schedule right now, but noticed that several MTO members have their's already.
I've had mine for several weeks, so I'll include some pics. I encourage anyone else to do so to.
Here's mine...a SkinthXL in coyote. I've got the H&K clip on a velcro tab so I can put it between the front flap & the pouch, but I rarely use it. (I'm not sure if Metro will be doing that little bit of custom work right now) It's also got paracord loops on the side tubes and the belt loop is actually 2 strips of 1" webbing with velcro so I can use it on my belt or pals webbing when needed.

Here is a bird's eye view of the open pouch, loaded.

Here is a spread of my load-out.

#1. A VIC Spirit.
#2. An "L" wrench with a #2 phillips bit on board.
#3. A VIC Ratchet with the extension on board(with a couple of o-rings to keep it from slipping too far through. That little gem I learned from forum member Nuphoria.)
#4. A VIC bitcase with the following: Modified 5/16" & 1/4" nut drivers; #3, #1, and #0 phillips bits; SW3 and SW4 allen bits; #20, #15, and #10 Torx bits.
#5. A 4" locking type plier
#6. A County Comm Rescue Blade in black
#7. A County Comm 4" Widgey Bar
#8. A small rectangular magnet attached to that. (Comes in handy sometimes. Like when I dropped drain plate screw down the shower drain today)
#9. A 1/4" drive X 1/4" socket adapter(with o-rings on board)
#10. The VIC Corkscrew w/jeweler's mini screwdriver
#11. The Coast 1XAAA G-10 flashlight I got for the price of shipping when I filled out the online survey about another Coast light.Last pic... the SkinthXL molle mounted in my Hazard4 Kato.

-
I spent about two hours on the Skinth Solutions site last night trying to make choices. I finally decided on the OG. I'll post some pics later on. The SP looks very tempting though...
Stay multi my friends
-
I think Metro has some of my previous pics on his solutions site. He knows he's welcome to any of mine. By having more pics posted others will get more ideas of how they can use one too. I look forward to seeing yours.
-
I got mine about a month ago and since then the only thing I changed is I carry it on my right hip instaid of left and I added some retreival lanyards on the Juice and ChapStick. I carried it every day since I got it.
Here are a few screencaps from the video




and here is the video of it.
-
Well done on the vid enki_ck!
Stay multi my friends
-
Agreed. Good video. Glad you found what you needed too.
-
Took some time but here's some pics of my OG. Gotta get me an SP now.
Stay multi my friends


-
Nice! Metro keeps pumping them out! He hadn't started using snaps and magnets when I purchased my SkinthXL. I haven't decided which one I "need" next, yet. Thanks for the pics!
-
Got my SkinthVS today! Great work Metro! If it was any sexier it would be the SkinthVS(Victoria's Secret)!!

-
I'm on the verge of ordering a skinth to trim down the bulk from an edc organizer to just a pen, torch (v10r) and multitool (charge)..
Thing is metro's site doesn't give a Size comparison or dimension on all the sheaths as I'd like to know approximately how the sheath sizes compare to one another..
Hopefully I could see more pics from the other skinth users out there :)
Sent from my iPhone using Tapatalk
-
@Viix said:
I'm on the verge of ordering a skinth to trim down the bulk from an edc organizer to just a pen, torch (v10r) and multitool (charge)..Thing is metro's site doesn't give a Size comparison or dimension on all the sheaths as I'd like to know approximately how the sheath sizes compare to one another..
Hopefully I could see more pics from the other skinth users out there :)
Sent from my iPhone using Tapatalk
Metropolicity will be happy to answer any questions you have. I'm surprised he hasn't responded to this yet for you.
Heres a link to another forum where he has a thread about them all.Or you can see his homepage here.
-
I'm pretty sure Eric has you on commission now ;)
-
@Viix said:
I'm on the verge of ordering a skinth to trim down the bulk from an edc organizer to just a pen, torch (v10r) and multitool (charge)..Thing is metro's site doesn't give a Size comparison or dimension on all the sheaths as I'd like to know approximately how the sheath sizes compare to one another..
Hopefully I could see more pics from the other skinth users out there :)
Sent from my iPhone using Tapatalk
Shoot him a PM. Hes been ridiculously busy lately but always has time for Skinth fans. In sure a PM or email will produce answers to any questions you have. There is a Skinth for everyone I'm sure you'll find the one (or two, or three) that's right for you!
Stay multi my friends
-
@SAKplumber said:
Got my SkinthVS today! Great work Metro! If it was any sexier it would be the SkinthVS(Victoria's Secret)!!

Now I want one! :D
Can this VS sheath be ordered online yet?
-
Metro's been busy moving but I'll bet you might put in a request . Goto his homepage or message him on MTO. His name is Metropolicity on MTO and EDCF, and probably several other places too.
-
Thanks for the info, cheers mate.
-
I am also intersiting in the VS...
-
Hey SAKplumber, thanks to all your picture threads here and over on edcf, I've put in my order for an XL too!

I've been meaning to ask you, how do you fit the 4 inch vise grip into the sheath? I have a knipex micro (which is about a 5"er) and wonder if that would fit
-
@Viix said:
Hey SAKplumber, thanks to all your picture threads here and over on edcf, I've put in my order for an XL too!
I've been meaning to ask you, how do you fit the 4 inch vise grip into the sheath? I have a knipex micro (which is about a 5"er) and wonder if that would fit
Good show, man!
I carry my 4" vise grips in the side tube, when I carry them, which is less often know. But I'm not sure about the diameter of he Knipex's grips so I'm not sure if they'll fit there or not. But I'm sure you can get 'em in the main compartment somewhere!
We'd all love to see some pics of it when you get it loaded up!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login