Show us your fixed blades
-
those as some great pieces.

-
Here is something on the cheap and cheerful side of things. This is an overly cheap...as in 10 bucks...combat/survival/tactical/whatever knife.
In fact, I am not sure what to classify this almost 12 inch monster. Sort of reminds me of those Rambo survival knives except this one has a full tang and is rather rock solid for the money.
The sheath is a nylon affair sandwiched with a hard plastic liner on the inside. The knife is securely held in place by a Velcro handle wrap that does a great job holding the knife in place. Everything is done in military olive drab...and the shape of the knife leads me to believe this is more of a fighting knife than a hunters special...although the blade would make it a great skinner. I don't see the need for an almost 12 inch knife for skinning though. There is a single oversized belt loop on the sheath.

The knife is solid because of the thick one piece steel throughout. The handle consist of nothing more than paracord wrapped around in such a manner that the thickest part is midway on each side of the handle. Surprisingly enough, rather comfortable for what it is. The paracord is then pulled through a hole in the pommel and tied to make a large wrist strap.
Maxam is known for making junk, and at 10 bucks, I figured I would let my old curiosity get the better of me and buy one. I was amazed that the knife is razor sharp. In fact, I almost cut through my thumb nail accidentally. Yep, its sharp. Cant' say how long it would retain its sharpness, or the quality of the steel, but for 10 bucks I don't care. The back serrated blade/saw section is also very sharp.

My only criticism is a slightly too short handle, that and what in the heck do I use this for? Shelf queen I guess.

-
@sparky415 said:
I like those a lot!
@Chako :D
Thank you sir. Mr. Coye not only makes some amazing knives, he is also a good person.
-
My Les George Model 1




-
You have some classy looking stuff Frstr8

-
@sparky415 said:
You have some classy looking stuff Frstr8
Thank you. I will post more later.
-
Two older knives:
They both come with a leather sheath.The 1st one was bought in Crete from its maker over 20 years ago.
It has a blade made using an old file.
Unfortunately it had a Rams horn handle which was discovered after nearly 20 years in storage to have been eaten way by some worm.
So it now has a much uglier plastic handle..
tan brown sheathThe 2nd one was a gift, from the UK, nearly 30 years ago.
It has “Captain flint” on the Blade and was imported to the UK by Whitby. It is made in Germany.
Red and black sheath.
I think it was a common, decent but cheap knife in those days. -
Forgot this one.
Touristy but usable, from crete 15 to 20 years ago..
8cm blade
-
My latest acquisition, a Gerber Magnum from around 1965
5 1/2" x .100 heavy duty blade (M2 high speed tool steel)This is the knife that Gerber called Lamb Handled Hunter from the late 1950s until 1965, and then called Mg = Magnum Hunter until it was discontinued in 1969.
This handle shape, first used by Gerber on the Abercrombie & Fitch Hunter in September 1947, was patented by Thomas Lamb of New York City in December 1945 No. 2,390,544 and licensed to Gerber.Gerber licensed Lamb's 1945 utility patent (most of his later patents were design patents) to make the Abercrombie & Fitch Hunter, and these were made from Sept 1947 to April 1953.
They have unplated aluminum handles, and are usually marked for A&F.A modified version of this with plated handle was introduced in the late 1950s (dunno the exact date), called Lamb Handled Hunter.
Its name was changed to Big Hunter in 1959, and its name was changed again, to Magnum, in 1965.(Source: Bernard Levine)


The first Magnum models were made with bright chrome handles and later coated with a “Steel Grip” finish (that was sprayed stainless steel) and then “Armorhide” coated (sprayed Teflon) and finally coated with black powder-coating (epoxy powder that is heated to bond it in place).
Some of the first knives had M-2 tool steel blades and later they were changed to 440C.
Both are great hunting knives and if they are in good condition they are becoming collectable.
The handles on all of these knives in die-cast aluminum that is cast onto the blade and then finished to shape and coated with one of the above processes.
This makes a virtually indestructible knife.(Source: Doug Hutchens, Gerber production manager)


Like Charles and Ray Eames, Lamb noted the inadequacy of the crutches used by wounded and disabled veterans.
Initially focusing on the armrest, Lamb quickly noted that the hand bore the main burden, and began to experiment with ways to redistribute the pressure and make the crutches easier to handle.
After extensive study anatomical and medical textbooks he developed his Lamb Lim Rest crutch.

Becoming the "Handle Man"
Lamb applied the patents developed in designing the Lim Rest to cookware, cutlery, surgical tools, luggage, sports equipment, and industrial equipment.
His designs culminated in his unique "Wedge-Lock" and "Universal" handles, and were a major influence on the Universal Design movement.
By the late 1940s Thomas Lamb was known as the "Handle Man".
In 1948 his work was featured at the Museum of Modern Art during the period when the design establishment were focused on Bauhaus-inspired functionality.
This publicity led to contracts to produce a line of cutlery for Cutco and cookware for Wear-Ever.Thomas Lamb died on February 2, 1988 at ninety-one years of age.
(Source: Wikipedia)




Gerber Legendary Outdoor Blades made from the steel that cuts other steel
" Imagine owning a blade as hard as a file, yet tough and springy !
Impossible in any cutlery steel - possible only in the kind of high alloy tool steel, which only Gerber is extravagant enough to use for knives.
Besides costing three times as much as any cutlery steel, it costs a lot more to make into a knife.
But it pays in the long run. It outlasts the user.
And all the time you own it you can be cutting with a sharper edge.
It's the knife you want on any outdoor adventure.
Complete with cowhide belt scabbard and unconditional guarantee."
-
Beautiful knife

-
Interesting material, how much is 1960's $17 in today's dollar?
-
-
@jerseydevil said:
That is a very pretty knife.Interesting material, how much is 1960's $17 in today's dollar?
About $122!
And now see if you can get one of these chromed babies for that amount of money, :D
-
I really like that chrome. Very retro looking.
-
Squeezing in my Arch Ally from Nemesis... don't mind me....
Def
-
And my Neckolas...

And my Cold Steel Magnum Kukri Machete, which has to be big so that it can hold that giant name...

And my Boker EFK...

Def
-
Finished this one up over the weekend.








-
Les George Model 1





Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




