SAK Heresy!!!
-
I like the cap lifter and can opener layer. I us the can opener all the time. As for as the mod goes....sounds cool.
-
Harumph! This is Heresy!
No - really though it's a good idea, but I use my tin opener a lot, I would say that about 70% of the tins in my kitchen cupboard don't have one of those rings. Same at work (though I do the shopping for work so maybe it's just what I buy).
I've used the hook a few times too. It was really useful when I was fox proofing our chicken coop - I used it to retreive cable ties threaded through netting, and I was stretching behind a chest of drawers to pick something up off the floor, and the hook gave me the couple of extra inches I needed.
I am intrigued to use the combi tool - I don't have one on any of my SAK's but no doubt I'll come across one some day.
Good thread, and be sure to show pics of the finished item; THE HERETIC (great name!)
-
Like this?

-
Why would this be considered Heresy? It's one of the most frequent mods done around here, except adding scissors to 93mm SAKs. And there are some official models that have this too like the 84mm Golfer, Voyager, Compact, Yeoman.
Only you can't use a Bantam, you need a 91mm Combo tool, like from the Compact, making it a bit expensive.
-
Burn the heretic! Heinz must be purified by fire! >:D Actually, I like the sound of that mod......I use the can opener a fair bit at work, opening tint cans and cans that have rusted shut solid to draw samples, but for out and about after work I like the idea.
-
You can use the combo tool as a can opener, i dont think it works as well but it does work.
-
Awesome! Thanks for the feedback/info guys! Now I know that I haven't totally lost my marbles!
GigaHz... that looks pretty much exactly like what I was thinking of! I see great minds think alike! :D
Losing the reamer/awl would be a bit of a drag though... could it be swapped into the hook's position instead?
-
@ducttapetech said:
You can use the combo tool as a can opener, i dont think it works as well but it does work.Yes, I've used the one on my Compact before. Not the easiest thing in the world.......
-
I like the combo tool for opening cans more than the regular. I eat lunch out of cans everyday so maybe it's the practice.
Swiss Bianco seems to have a really nice series in the yeomans with the combo tool. Pricey but nice. -
So it will be like a +B Yeoman Mechanic sans the Magifiying/Philips layer ?


I always thought that philips was kinda redundant :P
-
Your mod idea is exactly what I want for my EDC except on the 93 mm frame. You can use an 84mm combo tool fine, it just sits a tad lower but works fine.
-
When i read this thread i was thinking... didnt see this already done amongst the photos and the creator called it a sak 33 or something

I was really into the idea of losing the opener layer with the Combotool in several configurations... i have hoarded quite a few 84 and 91mm combo tools for the purporse.
BUT now i find myself using both screwdrivers fairly often`and the little one works so well as a flat phillips so i am thinking to go the other way and loosing the blade layer since i usually have small fixed blade anyway -
@Santos said:
... so i am thinking to go the other way and loosing the blade layer since i usually have small fixed blade anywayNow that is heresy! Burn the unbeliever!
Btw, +B did a bladeless SAK like that a few years ago, IIRC.There's something inherently wrong about a SAK with no blade. Multitool Built From The Frame Of A Swiss Army Knife doesn't have the same ring to it. :)
-
I like how the thread-starters name is Heinz and how he doesn't like can openers.

-
So on further reflection, I'm thinking that if I need to cannibalize a Compact for this to work, rather than also use a CT34, that a CT29 would be a better choice. No pliers, but for a pocket EDC, I could live with that.
So now I'm thinking take the bit driver and holder out of the CT29 and transplant it into the Compact. Seems the simplest way to do it. The CT29 then becomes a Spartan when you put it all back together.
-
The combo tool is the reason I bought the Hunter when I was forced to replace my Rucksack. I liked the idea of the gutting/rescue blade as well. After EDCing it for over a year I am still undecided. I like the rescue blade but I've used it hard and it is not quite as good as it was. The combo tool is a pretty good opener, both bottle and can, but I find it subpar as flathead driver and almost impossible to use the corner as a phillips. I think in a do over I would probably get another Rucksack but it really is a 51/49% thing. In closing, while I like the idea of saving a layer or adding a different tool by using the the combo tool, you do lose the full functionality of the full opener layer. Kinda what MTs are all about to begin with; compromise.
-
@Espen said:
I like how the thread-starters name is Heinz and how he doesn't like can openers.:D

@Heinz Doofenshmirtz said:
So on further reflection, I'm thinking that if I need to cannibalize a Compact for this to work, rather than also use a CT34, that a CT29 would be a better choice. No pliers, but for a pocket EDC, I could live with that.So now I'm thinking take the bit driver and holder out of the CT29 and transplant it into the Compact. Seems the simplest way to do it. The CT29 then becomes a Spartan when you put it all back together.
I think, I think, you need to add an extra liner for the bit driver to fit properly. Therefore, your modded CT would not much thinner than a regular CT29. And you would lose the awl which won't fit in the scissors layer (or at least it won't fit very well). And keep in mind that the combo tool is a bit thinner than the normal openers so it's less suitable for heavy work.
-
I like how the thread-starters name is Heinz and how he doesn't like can openers.
:D

@Heinz Doofenshmirtz said:
So on further reflection, I'm thinking that if I need to cannibalize a Compact for this to work, rather than also use a CT34, that a CT29 would be a better choice. No pliers, but for a pocket EDC, I could live with that.So now I'm thinking take the bit driver and holder out of the CT29 and transplant it into the Compact. Seems the simplest way to do it. The CT29 then becomes a Spartan when you put it all back together.
I think, I think, you need to add an extra liner for the bit driver to fit properly. Therefore, your modded CT would not much thinner than a regular CT29. And you would lose the awl which won't fit in the scissors layer (or at least it won't fit very well). And keep in mind that the combo tool is a bit thinner than the normal openers so it's less suitable for heavy work.
Yep the combotool liners are 0.050 inch thick about double the thickness of standard liners. I'm still thinking about this mod too and I want some variation of it, but not sure what. I'm still waiting for parts to come in, I have a cybertool driver layer on the way. I still have to make a bit holder for the 93mm frame too.
-
Like this?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login