SAK Heresy!!!
-
The combo tool is the reason I bought the Hunter when I was forced to replace my Rucksack. I liked the idea of the gutting/rescue blade as well. After EDCing it for over a year I am still undecided. I like the rescue blade but I've used it hard and it is not quite as good as it was. The combo tool is a pretty good opener, both bottle and can, but I find it subpar as flathead driver and almost impossible to use the corner as a phillips. I think in a do over I would probably get another Rucksack but it really is a 51/49% thing. In closing, while I like the idea of saving a layer or adding a different tool by using the the combo tool, you do lose the full functionality of the full opener layer. Kinda what MTs are all about to begin with; compromise.
-
@Espen said:
I like how the thread-starters name is Heinz and how he doesn't like can openers.:D

@Heinz Doofenshmirtz said:
So on further reflection, I'm thinking that if I need to cannibalize a Compact for this to work, rather than also use a CT34, that a CT29 would be a better choice. No pliers, but for a pocket EDC, I could live with that.So now I'm thinking take the bit driver and holder out of the CT29 and transplant it into the Compact. Seems the simplest way to do it. The CT29 then becomes a Spartan when you put it all back together.
I think, I think, you need to add an extra liner for the bit driver to fit properly. Therefore, your modded CT would not much thinner than a regular CT29. And you would lose the awl which won't fit in the scissors layer (or at least it won't fit very well). And keep in mind that the combo tool is a bit thinner than the normal openers so it's less suitable for heavy work.
-
I like how the thread-starters name is Heinz and how he doesn't like can openers.
:D

@Heinz Doofenshmirtz said:
So on further reflection, I'm thinking that if I need to cannibalize a Compact for this to work, rather than also use a CT34, that a CT29 would be a better choice. No pliers, but for a pocket EDC, I could live with that.So now I'm thinking take the bit driver and holder out of the CT29 and transplant it into the Compact. Seems the simplest way to do it. The CT29 then becomes a Spartan when you put it all back together.
I think, I think, you need to add an extra liner for the bit driver to fit properly. Therefore, your modded CT would not much thinner than a regular CT29. And you would lose the awl which won't fit in the scissors layer (or at least it won't fit very well). And keep in mind that the combo tool is a bit thinner than the normal openers so it's less suitable for heavy work.
Yep the combotool liners are 0.050 inch thick about double the thickness of standard liners. I'm still thinking about this mod too and I want some variation of it, but not sure what. I'm still waiting for parts to come in, I have a cybertool driver layer on the way. I still have to make a bit holder for the 93mm frame too.
-
Like this?

-
Never mind my posts about an extra liner. I think that is irrelevant if you also have scissors

-
@Eyegor said:
The combo tool is the reason I bought the Hunter when I was forced to replace my Rucksack. I liked the idea of the gutting/rescue blade as well. After EDCing it for over a year I am still undecided. I like the rescue blade but I've used it hard and it is not quite as good as it was. The combo tool is a pretty good opener, both bottle and can, but I find it subpar as flathead driver and almost impossible to use the corner as a phillips. I think in a do over I would probably get another Rucksack but it really is a 51/49% thing. In closing, while I like the idea of saving a layer or adding a different tool by using the the combo tool, you do lose the full functionality of the full opener layer. Kinda what MTs are all about to begin with; compromise.Have you thought about an Outrider? Mine has been very reliable and a great tool overall. Steve modded it for me by just taking out the saw and I'm even more in love with it now, it's just a little big. That's why I'm pondering some kind of mod with a bit driver.
-
Like this?

When i read this thread i was thinking... didnt see this already done amongst the photos and the creator called it a sak 33 or something

I was really into the idea of losing the opener layer with the Combotool in several configurations... i have hoarded quite a few 84 and 91mm combo tools for the purporse.
BUT now i find myself using both screwdrivers fairly often`and the little one works so well as a flat phillips so i am thinking to go the other way and loosing the blade layer since i usually have small fixed blade anywayYou know, I think removing the knife layer is an interesting idea. So yeah, I guess I am a SAK heretic after all!
I mean, if you already carry a folder, and I usually have at least my Dragonfly 2 in my bag, if not my pocket most of the time, then what's the blade on the SAK going to do for you, except be a less capable back-up? And perhaps more heresy, but let's face it, a 91 mm SAK blade isn't going to be up to the same kind of jobs I'd consider doing with my DF2, IMHO.
So that's another idea... bit driver and holder, scissors, and pliers, and whatever would work on the back side with those layers. I suppose for good measure you could throw in a file too. That seems like it would be a pretty neat tool. :)
-
It's not crazy to remove the blade layer if you always pair it with a folder. Nice combo if they are together really. I wouldn't call it heresy, but then again, it's no longer a swiss army knife, but a swiss army tool... but I say do whatever works! :D
-
I'm not really qualified, as I don't own a SAK with the combo tool nor have I ever used a combo tool, but I too would definitely would miss the awl.
-
All things considered, I think the best single EDC pocket tool for me would be a compact with the Cybertool bit driver and holder.
I could live without the awl, and the pliers, although they would be nice to have. My primary goal is to find a pocketable tool that will do 95% of what I need with a single tool, and I think that would be it.
Of course, now that I've read Def's review of the Gerber Fit, I'm wondering if that might suffice. Although I'd tend to think it wouldn't be as nice.
-
[necrobump]
I'm really interested in this in order to shave one layer from my CT34 but I don't want to lose the awl.
It's been said that awl and hook are not a straight swap, are there any threads covering specifically that mod (~2014 CT)?[/necrobump]
-
GigaHz built that black Cyber Compact for me and it makes for a great tool combination.
We went back and forth with changing the hook for an awl and decided not to do it. The awl is thinner than the hook by 0.35mm (2.35mm vs 2.00mm) and would leave a gap on the scissor layer. Also, the hook back spring recess is deeper than the awl's so the awl would sit too deep with no access to the nail nick.
Here is another picture.
-
@ebarberena said:
GigaHz built that black Cyber Compact for me and it makes for a great tool combination.We went back and forth with changing the hook for an awl and decided not to do it. The awl is thinner than the hook by 0.35mm (2.35mm vs 2.00mm) and would leave a gap on the scissor layer. Also, the hook back spring recess is deeper than the awl's so the awl would sit too deep with no access to the nail nick.
Here is another picture.
Cool. I have that on my list of future builds once I get a CyberTool.
-
@ebarberena said:
GigaHz built that black Cyber Compact for me and it makes for a great tool combination.We went back and forth with changing the hook for an awl and decided not to do it. The awl is thinner than the hook by 0.35mm (2.35mm vs 2.00mm) and would leave a gap on the scissor layer. Also, the hook back spring recess is deeper than the awl's so the awl would sit too deep with no access to the nail nick.
Great! Thank you!
-
Combo tool = great can opener, great cap lifter, poop screwdriver, poop prybar :-\
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
