Quick thoughts on the Gerber Dime
-
I've had it a couple days now and have been giving it the once over.
Here are some thoughts in no particular order:
-
The scissors seem like they the Wenger scissor without serrations. They work great. Much better than the old Squirt scissors or Juice scissors.
-
The bottle opener is fantastic. I thought it might snag in a pocket, but actually the shape seems to prevent that
-
The blade is super. Much nicer than the chisel ground generic drop point-ish blade on a Squirt.
-
The package opener is excellent. It cuts baling twine really well too.
-
The flat driver is short but stout and has enough thickness to be useful.
-
The 2D Phillips/file is a little silly. Not enough file to really be useful. The 2D driver is only a little better than the corner of the flat driver.
-
The pliers are slick! The tip is very precise. Almost surgical in precision. The spring action is excellent. (I hope the backsprings are up to the job... :ahhh)
-
I almost missed the tweezers. They are also very Wenger-like
-
The split ring seems pretty flimsy. I don't think I'm going to trust it.
Overall, this is a serious contender to the Squirt and Style CS tools.
This is the nicest offering I've seen from Gerber in a while. It's going into EDC rotation.

-
-
Arrrrgh! I want my Dime NOW! :ahhh Happily it's winging it's way across the pond as we speak. :D
-
DON'T USE THE WIRE CUTTERS!!! :ahhh

That happened cutting ONE STRAND of #12 solid core copper wire.
-
Seems we have a verdict on the non spring tempered spring then.... its not a spring!
-
Woah, if it's steel wire I can understand, but copper?
Definitely subpar heat treatment, should've snapped before bending that much.
-
I've sent an email off to Gerber to let them know about this situation. I can't say whether they will respond to us or whether they will do anything about it, but I would suggest that anyone who breaks their Dime should contact customer service and find out how to make a warranty claim.
Gerber's warranty department has looked after everyone so far and I doubt they will let anyone down now.
Def
-
Eh, I'm feeling a little embarrassed here, but what's wrong on that picture? What happened to the tool when the wire was cut?
-
The loop in the left is what's left of the backspring.
Def
Sent from my MB860 using Tapatalk
-
I got my two today and I have to agree 100% with your list Mr. Whippy. I was testing the scissors out, cutting some paracord and it went through it pretty easily even though they are a bit small. I then tried cutting the paracord with the scissors on my Wingman and they didn't work half as well. I was going to put beer in the fridge today but forgot so haven't tried the bottle opener but it looks like a win. The pliers are really nice for more delicate work.
But to be honest, I wouldn't have cut #12 wire with this regardless if it's copper or not. I think the biggest wire I would attempt to cut with the Dime is #14. After all, this is a keychain tool. Even a Leatherman 300's wire cutter isn't any match for a proper set of linesman pliers, never mind the Dime.
Again, you have pretty much summed up my thoughts on this little guy. I've put one on my normal keychain and the other on my work keychain.
-
I agree. I just got mine yesterday.
One thing I should mention, this is way smaller than I thought it was going to be. Gerber's smallest plier based pocket MT to date.
-
The features look impressive!
-
I'll pretend for a minute I never heard about its faulty wire cutter back spring... It seems a little pricey at $14.47 on Amazon for what it is ::)
-
-
I think they are a bargain. Stylish and the implements are thought out and useful from what I hear
-
If the cutters weren't crap, it would be a strong candidate for MT of the year, IMO.
-
My Dime saw a fair amount of use today, everything except the wire cutters. I have to say that I like it a lot. The flat screwdriver is a nice useful size, the blade and scissors are pretty good, and the pliers are useful for small jobs, including cutting zip ties, which it handled with no problem. The package opener was effective even on some plastic that was pretty thick, and the tweezers pulled a splinter out of my finger with no problem. I figure that if I need to be cutting wire I won't use the Dime, but that's not something that comes up for me during the day. Come to think of it, I've never used the wire cutters on ANY of my tools to cut wire.....In that case, the Dime is a winner in my book.

-
Hey guys, just a question for those of you who already have the Dime -- how big are the pivots on it? 1/8 like the Squirts? Just wondering, I'd never heard anyone talk about it :o
-
Is it just me, or the blades -- both the main blade and the package opener -- come almost factory blunt?
I mean, the main blade struggles to cut the typical slice of paper, and I can safely slide my finger thru the edge without cutting my self. I don't remember getting anything with such a bad factory sharp.
I also got a little disappointed with the blade geometry overall.The good news is that the wire cutter survived on a hard 1mm diameter paper clip.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
