Wave Owners Club
-
Someone else here recently had the same issue. There were a lot of recommendations. Mine was use pliers from another tool. The same thing happened to me, that's what I did.
-
So far as I can see you're not doing anything wrong.

-
Yes still haven't got it out yet even with help from a very well build friend and pliers in both ends. When I get the other bits I will see if they fits better.
That if I get the first one out. ??? -
I dont have one of those, but it looks like the knurled collar pulls down (towards the wave) to release?
-
Mine came that way as well, super tight, so i sprayed WD-40 in there i mean i drowned it in the stuff let it sit for a bout half n hour, got my vise grips clamped that bad boy on the bit, n pulled and it popped out then i just got a lil fine grit sand paper and took that black coating off the bit, just enough to get the coating off not really take any metal away, but before i tried putting it back in i sprayed WD-40 in the extender kept the bit in the vice grips and worked it in n out many tymes, then flipped the bit and worked the other end in there like i did on the previous side. Hope it works for ya if not your going to have to heat it up to get it out that should be the last resort...
-
@Mr Biriyani said:
I´m a bit slow I guess. I have had a Gerber that I have been running everyday since 93-94.
This Christmas I bought my Wave that I love.
But one thing is bothering me.A while a go I ordered the bitextender I was also supposed to get the bitkit but they were out.
Well I wanna try and put the bit from the wave in the extender.Click, nice and easy but man is it stuck !
It took me three days with two pliers and a lot of oil to get it out. I had to try again if i did something wrong and it is stuck again.
So am I just stupid(probably) or to weak or is there a trick I don´t know about or a law that says don´t put THAT bit in the extender ?

Does anybody know ?Hey, btw, welcome!
-
@reezen_60 said:
Mine came that way as well, super tight, so i sprayed WD-40 in there i mean i drowned it in the stuff let it sit for a bout half n hour, got my vise grips clamped that bad boy on the bit, n pulled and it popped out then i just got a lil fine grit sand paper and took that black coating off the bit, just enough to get the coating off not really take any metal away, but before i tried putting it back in i sprayed WD-40 in the extender kept the bit in the vice grips and worked it in n out many tymes, then flipped the bit and worked the other end in there like i did on the previous side. Hope it works for ya if not your going to have to heat it up to get it out that should be the last resort...Thanks for the tips and the welcoming. I will definitely try that.
There is metal ring in the extender that grabs a notch in the bit. Maybe to tight. I was thinking of taking that of but will wait until I can try how the other bits is fitting. -
I bought my first Wave in 1998 and of course was the original wave, the MT I had been using for long time (12 years) but unfortunately was stolen from my truck, after that, I got the new Wave in 2008 and I still have with me,
Definitely a very good MT, however, sometime I still miss the original version, probably I will get it when I have a chance.. -
Yeah, the original Wave was nice in that it was a more compact package to carry
The 2004 Wave was "improved" in almost every way, but all those improvements made it wider and heavier. :-\ -
In theory, I'm 2 days away from joining.
Waiting... waiting...
-
...And it's official. I'm in.
Still evaluating the tool, but so far, it's very nice.
-
Just picked up my wave today! It's my first multitool, and so far I'm very impressed!



-
great pics mate. The Wave is indeed a great first Multi.

-
Hi all, new boy here(have to be honest been lurking for a while)
I went with the Bo version,(wildlife photographer mixed with camping so stealth was a good choice i think,thats my excuse anyway :D)
You Guys weren't joking about the blade edge varying,i find myself using the serrated edge for tasks around the house(opening boxes and bags etc)until i put a sturdy edge on the primary blade,all in all though a very decent edc MT.
I admit i have been lurking but your advice and knowledge has been great for us lurkers too(thought it was time to come out of hiding) so thank you all,_edited-1.jpg)
_edited-1.jpg)
-
I just received a new Wave in a trade and so far I have to say that it has already come in handy fixing the back of a toilet.

-
There's a club? Cool!! My second Leatherman ever was the original Wave, and I've since aquired the new model, too. Two of my all time faves!

-
@gcconspiracy said:
Just picked up my wave today! It's my first multitool, and so far I'm very impressed!Beware,when I got my first, the pliers did not properly there was a space in the area whereere they meet,I learned to hold up the pliers end up to the light and look for any space .

-JH -
@JimShockz said:
Beware,when I got my first, the pliers did not properly there was a space in the area whereere they meet,I learned to hold up the pliers end up to the light and look for any space .
-JHThat's too bad, my pliers work phenomenally well. No gap, and no complaints! Still loving my Wave!
-
Just picked up my wave today! It's my first multitool, and so far I'm very impressed!
Beware,when I got my first, the pliers did not properly there was a space in the area whereere they meet,I learned to hold up the pliers end up to the light and look for any space .

-JHI would love to see pics, because the space might be intentional for added grip. If it tapers away from the tip toward the center then they meant for it to happen. The pliers grip better if they don't meet flush all the way across when closed.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login